Great video, most common occurrence for me is just as you said, that little sparkplug spring attachment clip that is simply bayoneted into the high voltage wire. There has got to be a better design for that clip.
@timberwrightsvs480
Жыл бұрын
At about 2:49 into this video, you mention that the new ignition module is "...a 1306 and that's a 1300A, so, hopefully, this is all new and improved..." As we've been here a couple of times with our MS361, I'd like to know if the full part number you used to make the coil replacement was 1135-400-1306 (I never heard you mention the entire Stihl part number) and, if it was, I wanted to verify that you left it in the MS361 you were working on in the video? As I'm sure you know, the OEM 1135-400-1300 coil for this saw is very expensive, so having a suitable replacement part number simply makes finding a replacement easier for all of the MS361 owners out in Stihl world. Thank you for making this informative video.
@slackerdog007slackerdog8
Жыл бұрын
A MS 361 was given to me, just fixing it up. I’ll keep what I watched in mind. Thank you, I’ll known if that comes up , ( reminder )Thank you.
@Living-The-Dream
3 жыл бұрын
Thanks for sharing the expertise and knowledge 👍👏
@aroundtheshop9615
3 жыл бұрын
Glad to!
@randy5766
3 жыл бұрын
Perfectly done.
@aroundtheshop9615
3 жыл бұрын
Thanks Randy! Hope you all had a great weekend!
@philliphall5198
Жыл бұрын
Closer would be better to see what your doing to it Thank You anyway for information and video
@kellytils5967
Жыл бұрын
Thank you….X10. This may be just what is wrong with mine. I have tried a coil and plug with no help.
@aroundtheshop9615
Жыл бұрын
No problem-Always hope to be a help!
@mariomontano3186
2 жыл бұрын
Do you have a link to Amazon or another site to purchase the special tools such as the spacer used to gab the ignition module and the spark tester? Thank you
@aroundtheshop9615
2 жыл бұрын
I really need to look into the Amazon Thing, but the special tools come straight from my local Stihl Dealer. Your local dealer should be able to take care of you on most of them! Thanks for checking out the video!
@maetamatea9700
2 жыл бұрын
A business card is fine to set the gap
@maetamatea9700
2 жыл бұрын
On the ignition to flywheel thats what i do it works .
@keithgreen4877
3 жыл бұрын
Thanks for showing the work on the ms361. Will you be showing the 880 going back together?
@aroundtheshop9615
3 жыл бұрын
Hope it helps! Plan to get started on the 880 soon!
@mattmidili4350
3 жыл бұрын
What is the website you’re using for that information? Just took my 361 clutch cover off to clean it since it’s excessively leaking bar oil and it’s like sludge under there the sawdust and oil. Saw has been running just fine prior to this. Anywho I ran it without the bar at idle and maybe a few slight throttle revs just long enough to confirm oil was coming out of the slit to oil the bar, put the bar back on tightened the chain and now it won’t fire up at all. I checked for spark which it does have, I didn’t check compression with a gauge but it feels like it has good compression I can hold the saw by the pull rope and it pretty much stays still without dropping. Now the newest thing I’ve seen with it when the saw is inverted fuel drips out by the chain brake/muffler area. Any insight will help. I’d like to get my hands on that troubleshooting flow chart. Thanks.
@steveduffala6699
2 жыл бұрын
best chainsaw ignition vidio I have seen. The only one that tells you it could be the flyweel. Than you.
Пікірлер: 20