I went out and purchased an MS660 when Stihl replaced the model with the 661......and I am sooooo glad I did, because the MS660 rocks
@stizacraack9693
5 жыл бұрын
Wears his helmet but not the muffs lol I like this dude
@saobx3956
7 жыл бұрын
Just bought one for milling. My first saw, lol.
@Human1337
7 жыл бұрын
Quite a saw to learn on lol =)
@ChaparralDenizen
7 жыл бұрын
The aluminum plate on the bottom of the gas tank protects the plastic tank from thrown chains.
@kiteslights7189
8 жыл бұрын
Love my MS 660
@Human1337
8 жыл бұрын
I'll love mine as well.....someday. Love my companies right now, maybe more than is appropriate, but hey, to each his own.
@johnclarke6647
5 жыл бұрын
So, popping back is a trait of the ms 660? I built a farmertec copy and it will yank the starter rope out of my hand in a heartbeat. I replaced the farmertec deco valve with a Husqvarna deco valve. That, helped a lot but it will still yank it out of my hand on occasion. It got me so hard one time that the handle cut my left knee and left a blood bruise for several days. I have been real cautious of it since. It is an excellent saw but a little tough to get going. I cannot pull it through without the deco valve. Age catches up with all of us and I never had your meat hooks, even when I was your age.
@TheGixxerig
5 жыл бұрын
hey yes I built the same saw only I went with the hyway big bore kit and I took 10 off the deck you have to use the decomp but if you bring it up on stroke it pops right off with half a pull I run a 25" bar and a carbide full house chain love this saw power is awesome
@dschamber7190
3 жыл бұрын
@@TheGixxerig you must like cutting really slow running a carbide full house chain... slowest chainsaw chain ever...
@1d1hamby
8 жыл бұрын
good video. need a little less raker on the cutters so it cuts faster for that strong engine.
@BruceJC75
Жыл бұрын
Gotta get one next year and start processing some slabs.
@iwishyouwaymorethanluck.3804
Жыл бұрын
Ur sick, ….. I am too. Welcome to the club
@shauncatlett6066
5 жыл бұрын
Lol i feel the same way about my MS 261 cm I bought last week and my M18 Fuel Sawzall and M18 fuel Supersawzall!
@richarddrake8033
7 жыл бұрын
At least the back of your head won't experience any hearing loss. Sharpen the chain too.
@ivanhamlyn4746
6 жыл бұрын
Nice saw
@Hundert1
4 жыл бұрын
Is this the same as the Ms 660 magnum?
@patrickprafke4894
5 жыл бұрын
Is there a part number for that wear plate on the handle?
@danieltreeworkernordin9624
4 жыл бұрын
she sounds very torqey! I think i buy one, at the moment i use MS500i, best saw ever created by mankind but you know, another saw does not hurt anybody
@bruceh5933
4 жыл бұрын
Daniel treeworker Nordin Good to hear about the 500i. Unfortunately I’m in Canada and have begged Stihl but they told me next fall at the earliest.
@Randaddy96
11 ай бұрын
You're running a dull chain or rakers are to high.
@robpivcevich6793
7 жыл бұрын
That's my baby right there.
@PEJA-fx8tc
4 жыл бұрын
good job
@QuackDealer21
4 жыл бұрын
My dad owns one of these beasts. She fires up first pull when she's warmed up came with a 25" B & C. Manufacture date is 11/2001. Almost 20 years, she still runs strong. Edit: He (my dad) felled a 75ft pine tree with 'er, didn't complain one bit. However, the tip of the bar got caught and bent when the tree came down. Saw is fine, so is my dad. He just ordered a new bar and she's ready to cut again.
@nathanw1862
4 жыл бұрын
older video of yours but when cutting looks like you hit a bunch of nails lol can you recall ? when the saw turns out the side of the cut makes me think you hit something, that and the dark ass stains
@davidnsds
6 жыл бұрын
I'm looking forward to buy a chainsaw for my friend's ranch. I'm between MS 650 or MS 660 (that's how I've found your video). What you said in the beginning of the video that you actually loved your saw and that she was sexy, I've got this same feeling for my Stihl pro brushcutter FS 220 (and maybe a little bit my BR 600). I live in Brazil in a suburb house and I bought those 2 babies to take care of the lawn (I wish that I lived on a farm to be able to use them more) I also saw your video 20 depression video, I did not go through everything that you went through, but I also suffers from depression, and for me, when I'm with my babies, I forget about the world and I feel good / happy. At first, I thought that I was crazy, that I was the only person in the world that would rather be with a machine than with another person (I had some very bad experiences in my previous relationships, I've been hurt). I don't know if you feel the same? If yes, I finally found someone in this world that feels the same thing that I do! =D
@davidnsds
6 жыл бұрын
I could say that Stihl is helping me to overcome my depression, What about you?
@Human1337
6 жыл бұрын
I'd say the same =)
@davidnsds
6 жыл бұрын
Human Nice! Good to finally know that there's somebody else just like me, I always assumed that I had a problem, that I was the only one like that
@davidnsds
6 жыл бұрын
I'm feeling better now hahaha TKS Human! What about you, how was it for you?
@davidnsds
6 жыл бұрын
I'm sorry about all of those questions, but I'm feeling like in the movie Ice Age, when Manny discovers that it wasn't the only mammoth in the world, hahaha
@douglaskroeger5218
8 жыл бұрын
You should see the new one I bought from Germany, true dual port!!!
@randypullman1155
Жыл бұрын
Nice!
@bryanlathrop3492
5 жыл бұрын
Were did you buy your saw? Cause I can’t seem to find one anywhere
@kommentarekommentierer2031
5 жыл бұрын
where are you?
@messagefrom8749
3 жыл бұрын
Still working well?
@eduardocalvoarias9656
5 жыл бұрын
Acaba de comprar una 660 ya la use es nueva maquinon de miedo excelente
@marcosvieira1328
2 жыл бұрын
Está faltando uma amolagem na corrente da motosserra.
@victor-emmanuel7485
6 жыл бұрын
Holy shit what a sexy saw!
@victor-emmanuel7485
6 жыл бұрын
What year is she? I now have my eye on one from 2009.
@Oldcoinsandstuff1
6 жыл бұрын
Oh crap !!! That's funny shit, but I get it!!
@eduardocalvoarias9656
5 жыл бұрын
Tengo 660 ms magnun pero es mas rapida la 661 ms incluso me parece mas rapida la xp 395 husquvarna
@ถนอมเเสนหลวง-ห3ฑ
7 жыл бұрын
wow oh god
@marvindjoneszate8583
3 жыл бұрын
What is the price of stihl ms 660
@jennykirk9516
Жыл бұрын
1100 dollars
@jennykirk9516
Жыл бұрын
1150 dollars
@gnargnar1898
4 жыл бұрын
bro is that thing blunt? i have one with half the bar size and it cuts twice as quick.. also nice work dropping the blade to the ground on the second cut, Stihl have a saw called the ms 260, you might wanna try that PRINCESS!
@joestrongwhite
3 жыл бұрын
A shorter bar I always going to cut quicker more rpms and less the engine has to work but yea his chain is a lil dull
@jeffdupuis9853
2 жыл бұрын
Where's your yum yum Nate. Truth be told I'm gold your 🥶. Ok yum yum.
@happyrecluse2849
2 жыл бұрын
3rd slice with taper in...
@hk93shooter
3 жыл бұрын
i just found out k&n makes a filter for this . yes.
@litewatefitr
2 жыл бұрын
Had me at the first sentence....
@MrSparkums
5 жыл бұрын
Right in the dirt..lol
@DesertStorm986
7 жыл бұрын
This thing would be wicked with a smaller bar, bigger than a 16"
@izzyc4230
6 жыл бұрын
you better not have cut that log into firewood!! thats dinning table stuff right there
@robertobryan2485
4 жыл бұрын
This saw is no good for Australian hardwood. Running a bar any bigger than 25 inches the saw cannot produce enough oil to lubricate the chain!! Even with the oil screw fully. Sorry by a Husqvarna
@georgedoorley5628
Жыл бұрын
have one here and thats my biggest gripe with it .......
@kingstoncowboy01
7 жыл бұрын
Anybody else notcie that he forgot to put his ears muffs on….lol
@redneckeliot032
7 жыл бұрын
I don't even use ear muffs when I use my stihl ms 880 and 461 that have muffler mods on them. (removed the baffle from the 461) (heavy muffler and porting on the 880)
@HavocHerseim
6 жыл бұрын
And?
@robertroth8814
7 жыл бұрын
Use the same saw everyday with a lot bigger blade
@jacobmckee5862
4 жыл бұрын
Your grammar indicates this is a lie.
@karynclements9099
3 жыл бұрын
bud you dont need no dawm saftey
@clintronnow264
8 жыл бұрын
@0:08 You really shouldn't be touching another man's saw like that. @0:16 LMFAO!!! and that's just weird even if it is your saw. =D
@Human1337
8 жыл бұрын
She never said no.
@portmorepawn5057
2 жыл бұрын
This dude started off the video really creepy
@michaelnickerson1705
3 жыл бұрын
You don't know how to cut wood man go down with the tip of bar all the way then go down with the back end cut must faster trust me
@Snijkamp
3 жыл бұрын
Why won't you allow your beard to take over your mouth region?
@chrissisty992
3 жыл бұрын
Bars upside down.
@dschamber7190
3 жыл бұрын
There is no "upside down" on a chainsaw bar..... they are meant to be flipped periodically so you don't wear down one side more than another...
@stealthslayer4406
7 жыл бұрын
The ironic thing is it's a MS (Magnum Stihl) but it hasn't got the magnum on it....????
@Human1337
7 жыл бұрын
The MS stands for Motosägen, german for chainsaw. The 660 is a magnum, plate/sticker might have fallen off.
@stealthslayer4406
7 жыл бұрын
The magnum is the muffler face that one has the stock standard muffler face
@kommentarekommentierer2031
5 жыл бұрын
Human Motorsäge*
@kommentarekommentierer2031
5 жыл бұрын
Human Motorsäge means „motorsaw“ Kettensäge means chainsaw, I often say Kettensäge, but if ur talking about a gas powered saw, you better say Motorsäge, for an electric one Kettensäge haha
Пікірлер: 80