461 is actually a great saw but they like a little more blowdown than a 372. They’re pretty finicky on porting unlike a 372. Tight case, big transfers, can’t widen the exhaust because of the piston pin. A few good reasons why they’re picky on what you do to them
@cajun3197
Жыл бұрын
@@RichFife yessir I know you’ve been in a few too
@Michagan_outdoorsman_James
Жыл бұрын
learned something new today i never even heard of water oak, thanks for the little lesson there, i have always loved stihl as thats what my dad used so kinda hits home for me. cant knock a good running saw regardless of the brand
@qdogbenson3112
Жыл бұрын
That's ok on the Stihls. I don't really like Poulan but I still used to check out this channel.
@dubbssawshop
Жыл бұрын
No doubt on the hard wood. Especially when cutting a knot or where a big branch is. That wood I have here at the house now, if you hit it with a sharp are it just bounces off lol. It's crazy hard wood. Nice build man, I believe the owner will be thoroughly excited 👍🏻
@Michagan_outdoorsman_James
Жыл бұрын
nice work man, u already know i love my 460 im hoping to get a 066 or 660 soon im getting a little mill setup to try and make me a tale or something i got some pretty red oak cookies drying in the shed
@aaronpowell4885
Жыл бұрын
Sounds super healthy👍🏻 Long as the customers happy!
@brandonsmith3447
Жыл бұрын
Actually, you were delineating the F outtta' that saw! Not overwhelmed, hell you weren't even whelmed.
@coxsaws
5 ай бұрын
Sweet build
@IowaPerformanceSaws
Жыл бұрын
I think I'm going to send you something to go along with that stellar hat.
@05victorylly
Жыл бұрын
I’ve got a ported ms460, pulls a 32” bar in hardwood strong.
@patrickpoulard24
Жыл бұрын
You forgot to bow down and pay homage to that Stihl saw after you got done using it, because as we all know STIHL RUNS THE YARD. It's good to be the King. 😊👍🏿👑👑👑👑👑👑👑 #stihlpower #stihlisyourdaddy #stihlrunstheyard
@shawncaudill424
Жыл бұрын
I am definitely not a steel guy by any means whatsoever but that definitely isn't a slouch either great work
@swampfoxpicks6908
Жыл бұрын
How bout aluminum?
@Houseworksaws
Жыл бұрын
Like already mentioned.. You need to run a hot 461.. They’re very impressive saws. Be hard pressed to find a Husq in the 70cc class that would outrun one. I’m a Husqvarna guy and I’ll admit it lol 😆
@baitammo4652
Жыл бұрын
Some builders can make a pretty strong saw out of them!
@rogerstern2542
10 ай бұрын
Nice to know. That’s why my 461 hasn’t been sent out for porting. I’m really worried about never seeing it again. Any recommendations for this would be greatly appreciated
@Brian-Outdoors
Жыл бұрын
I agree on your comments on the bark box. I myself think they are just loud an obnoxious for very little gain but maybe I am just getting old.
@brandonnelson4164
Жыл бұрын
Any interest in doing some repairs on my Makita 9000 and mods? Needs the ignition out of the 9010 (coil and flywheel - have parts) and a carb rebuild. I imagine it would pull well.
@Born2doom
Жыл бұрын
The 461 was the best saw they made for its category! Don’t get me wrong the 462 is good but idk just personal preference
@themanchannel8761
Жыл бұрын
Look up John's Custom Saws. He builds a MEAN 461. He gives it some secrets and numbers, as well.
@novicelumberjack
Жыл бұрын
That's guy is a douche and has begun stealing people's saws. Suspected drug use.
@novicelumberjack
Жыл бұрын
@RichFife He's been on his deathbed for over a year? There's more to this story than you think you know. I will gladly label him a douche to his face. Don't care if he can build a good saw or not. Never said anything about that. He's a little weasel who starts crap with others for no reason. That, is something I care about. Do not question my character, for it is of the highest. Delete your comment about me being petty, or I will gladly boot you from my channel. You do not know me. John has a history of badmouthing others for no reason. He starts trouble and drama just to get views. And he did that long before he was "on his death bed".
@christopherlehman4045
Жыл бұрын
Guys actually have been asking for the saws he’s had of theirs for over a year, some have actually commented on his KZitem channel that he hasn’t posted a video on in 3-4 months. A lot of these comments have been deleted so he’s able to watch his channel and remove unwanted comments. He also isn’t answering his phone one guy went to his house to get his saws and John called the cops on him. I do believe he’s upright and well enough just used the sickness as an excuse. You have proof he’s on his death bed?
@novicelumberjack
Жыл бұрын
@christopherlehman4045 Thanks for the backup their Chris. I purposefully blocked him over a year ago. Didn't know about any illness. But he was a shitheal long before he got sick. I've just seen the way he makes up stuff, says people are scheming against him because he is doing well (total bs), and flat out lies about other porters and KZitemrs to get drama pumped up and the guys who follow him like little puppies don't take a second to ask if it is truthful. He posts hate videos on people at 4am and then takes them down before they wake up. Total BS. He has done it to all sorts of folks, me included. Yeah...he's a douche. He is the one guy in this little chainsaw world of ours that I have a real problem with. He is a total tool.
@lumbearjack1439
Жыл бұрын
How open did you make the muffler? I found the more I open the muffler the more it likes it
@Doc-Cole_Trickle-of-Chainsaws
Жыл бұрын
👍🆙BigGuy
@shawncaudill424
Жыл бұрын
Just curious what your thoughts are on the laser brand bars
@lukereynolds9907
6 ай бұрын
Chinese rubbish
@loweralabamahomesteading4661
Жыл бұрын
If you were close to south alabama ide tell you to come get this huge live oak log I've got before I burn it
@chainsawcanuck
Жыл бұрын
Seems to cut good, even tho it's a stihl.. Lol
@99SVT
Жыл бұрын
Dead locust hardest wood I’ve ever cut.
@michaelmanzo1716
Жыл бұрын
Yep, same here. Stihl doesn't impress me often. Just the sound of a stihl exuahst tone sounds like a bag of fkn tin cans rattling around inside muffler. Always stingy oilers, and other weird sht.
@joshuasweet1532
Жыл бұрын
I love to here you hate on stihl...I don't like em... go husky
@Moosehound597
Жыл бұрын
I think the ms440 is a better saw than 460 or 461
@lukereynolds9907
Жыл бұрын
Yep
@Moosehound597
Жыл бұрын
@@RichFife wasn't my point, but sure bud whatever you say.
Пікірлер: 38