I have a Stihl FS 110. I bought it at least 8 years ago and it's never given me any difficulty until a couple of days ago. I intend to purchase a carburetor kit to replace the one that's in it. The kit also comes with a spark plug, gas filter, air filter and other parts from Amazon. I noticed that it would start and work well until I needed to shut it off for a few minutes. It used to restart it without any problems but lately, it wouldn't restart. I cleaned the filters and spark plug and it's working a lot better. I started using that premixed 50 to 1 gas that is sold in Home Depot. It doesn't have ethanol and that's the main reason that my machine has lasted so long. I use it quite a bit since I live in S. Calif. I have 2 and a half acres of lots of weeds.
@INSIDEHOUSEGARAGE
3 жыл бұрын
I'm going to guess that the original carb is having some difficulties delivering fuel like it supposed to so a replacement Carb is the best option. Hopefully it works out for you.
@robroy5073
3 жыл бұрын
Great video! You helped me find the clogged spark arrestor in my FS85, and now all is well. Thank you.
@INSIDEHOUSEGARAGE
3 жыл бұрын
no problem and thank you Rob Roy
@Keith-vacuums
4 жыл бұрын
Poor Stihl trimmer I had to buy another echo pas 225 today because my old echo pas 225 blew up today It was a sad day today I love ur videos man keep up the good work it’s a shame people don’t take care their equipment
@INSIDEHOUSEGARAGE
4 жыл бұрын
Thank you Keith Quarles for the comment I appreciate it
@monelfunkawitz3966
4 жыл бұрын
They last longer because they are built better. I still run my FS 85. Wife got annoyed from the clutch bell sound, so last year I bought a brand new Troybilt. It lasted two uses and was nothing but problems. EVERYTHING broke. For the FS 85 all I do is run Amsoil, clean filters, grease gearbox and keep the carb tuned. Runs like a champ.
@INSIDEHOUSEGARAGE
4 жыл бұрын
Excellent work. Thanks for the comment I appreciate it
@diarmuidoc9427
4 жыл бұрын
I often wondered what made that ding a ling bell sound in my Stihl hl75 hedge cutter. Never knew it was the clutch! I could listen to that bell sound all day.
@ramadinsookhoo6141
3 жыл бұрын
Sad to see such neglect to such an amazing piece of equipment. Thanks for sharing bro
@INSIDEHOUSEGARAGE
3 жыл бұрын
no problem, this one is a candidate for a rebuild
@ramadinsookhoo6141
3 жыл бұрын
@@INSIDEHOUSEGARAGE cool. Looking forward on seeing that video bro
@INSIDEHOUSEGARAGE
3 жыл бұрын
@@ramadinsookhoo6141 it's in the works
@markm921
3 жыл бұрын
I get as much joy out of maintaining my equipment as I do sipping a cold one and looking at the end result of using it!
@INSIDEHOUSEGARAGE
3 жыл бұрын
very well said and me too
@uberdimensionalebrottute4354
4 жыл бұрын
I use a FS85 since 2002 and it runs perfectly, the Stihl Trimmers are built very well and I take good care of my equipment. I only use Stihl
@INSIDEHOUSEGARAGE
4 жыл бұрын
Excellent. You must take very good care of your equipment for it to last . Thanks for the comment I appreciate it
@cbyutube
3 жыл бұрын
I have a Stihl and it NEVER starts. Have to take it to someone every year. This is my THIRD gas trimmer - it will be my last!
@lewiemcneely9143
2 жыл бұрын
It's the build quality and like a painter said that had a BOSE Wave Radio on the job; 'I figured if I paid a lot for it, I'd take care of it'. This is how I got my MS 440 Magnum saw. A dose of straight gas. BUT a OEM top end replacing, jug, piston and rings, cured that problem. Around $350 BUT a cheap price to pay for a $1200 saw. Stihl runs fine. Sorry about that one but......................! Blessings!
@Someone91741
11 күн бұрын
Whenever you see "sad ending" in a video title from this guy. You know it's over.
@INSIDEHOUSEGARAGE
11 күн бұрын
it's possible that I might come back to it.
@jimamerica7419
4 жыл бұрын
Very sad. Was a great trimmer and not cheap. Reason for possible damage as you have pointed out, accidently using straight gas, wrong mix in gas can, mixing wrong ratio fuel/gas in gas tank of trimmer (yes, I have heard of people doing that) or loaning equipment to friends and neighbors. Never loan out your power equipment. It will not be the same when you get it back. My stihl is over 15 years old. I did have to replace the coil last year. It still is running strong.
@INSIDEHOUSEGARAGE
4 жыл бұрын
excellent. Thanks for the comment I appreciate it
@johnfisher747
3 жыл бұрын
My father gave me one piece of advice that I have followed religiously. Loan out your wife if you’re so inclined but never loan out your power equipment 😆👍
@rickharper994
3 жыл бұрын
I have a FS 38 I just love it .But I take care of it always have and always will.
@INSIDEHOUSEGARAGE
3 жыл бұрын
I totally agree with your decision to take care of it
@crismartinez5975
4 жыл бұрын
I have a FS 90 R and work all day, everyday, for over 2 years. I bought 91 R and did not like it. Its heavier and I don't get the same feeling. The 90 has the same problem as the one on the video, it won't stay on unless on the choke. I wish they continued the 90 R instead of the newer models. Great video!
@INSIDEHOUSEGARAGE
4 жыл бұрын
I completely agree with you. Thanks for the comment I appreciate it
@mohamednazeel7649
4 жыл бұрын
Expensive or even cheap weed eaters will last long... they need service n care cheers.. love your videos
@INSIDEHOUSEGARAGE
4 жыл бұрын
Thank you Mohamed Nazeel for the comment I appreciate it. I very much agree with you.
@devilsoffspring5519
4 жыл бұрын
Danged if I know why so many people with 2-stroke engines insist on running them with no oil in the fuel. "I'm only using it once, it doesn't matter." Yes it does! If you have a damaged 2-stroke, and it still has some compression, you can sometimes get more use out of it (sometimes a lot more) by adding more oil to the gas. For example, if it's normally 40:1 or 50:1 fuel-oil mixture, try using 25:1. The engine will smoke more, but the extra oil will help seal small gouges in the cylinder wall, giving better compression and allowing you to keep using the engine. Also, low compression doesn't always mean the engine is completely trashed. It might just mean the piston rings are stuck, and if you can get it to run, running it hard for a while may loosen the rings. In an extreme case you'll have to dismantle the engine to free the rings if they're really glued in with deep-fried carbon deposits.
@INSIDEHOUSEGARAGE
4 жыл бұрын
Very well said I appreciate it
@samuelvelez1643
4 жыл бұрын
One time I had entered in a repair shop and asked the owner why he had a lot of trimmers in the floor;he told me that some brick headed customers use their 2-cycle trimmers with only gas (no mixture)the look of my face was priceless...
@danieldistler5387
3 жыл бұрын
The similar problem even after I had professional service from a trusted location. what I found was the tank filter we floating still connected to the tubing so I was wondering if I'm just sucking air. Took the tank off and carefully push it back in making sure it was at the bottom of the tank and now runs better than it has in years. If it happens again I might spring or something to add weight to the rubber hose to keep the filter to the bottom tank.
@INSIDEHOUSEGARAGE
3 жыл бұрын
if you do make sure it's stainless steel
@horacepinker6578
3 жыл бұрын
So I'm calling a misdiagnosis on this one. It started and ran on choke. as soon as you turned choke off it stopped. Classic carb issue not getting enough fuel. Low compression wouldnt start at all.As it heats up you will get higher compression too. clean carby and retune. Also some 2 stroke oils dont have the blue dye in them doesnt mean fuel is not mixed. pour some on a pane of glass let it evaporate and see if there is oil residue.
@INSIDEHOUSEGARAGE
3 жыл бұрын
thanks Horace Pinker
@scottfirman
2 жыл бұрын
If it has a crank seal that is bad, it will do that. Been through it twice.
@jasonstricklin2602
3 жыл бұрын
And this is why we make sure to put the 2 cycle gas in our 2 cycle engines And make sure to get the ratios right. We know not to put regular gasoline in a 2 cycle because of the damage it can cause however some of us don't always read the warning labels And or ignore what we are told We can even forget sometimes And that's why things like this happen.
@INSIDEHOUSEGARAGE
3 жыл бұрын
very well said.
@rigobertodimas8014
3 жыл бұрын
I'm a small engine mechanic thears no reason for this to happen to a stihl trimmer i own sthil products & I make it a point of servicing all my equipment that's why at the end of the day I take the time to clean up the equipment have it ready for the next job I own the fs90r trimmer sthil ms290 chain saw & the ms441c magnum with a 25in bar & the br600 sthil back pack blower nobody is allowed to use eaney of my sthil equipment ever so don't even think bout asking
@INSIDEHOUSEGARAGE
3 жыл бұрын
thank you for your input Rigoberto Dimas
@ptate98
4 жыл бұрын
Thanks. I've had the very same problem .
@INSIDEHOUSEGARAGE
4 жыл бұрын
Thanks for the comment I appreciate it
@bullwinklemoose5039
2 жыл бұрын
I have a fs85r purchased in 98. A few years ago I put new rings and crank seals and a new stihl carb. It fires on the first or second pull every time. It was in storage last year when we went on an extended vacation. After a shot of carb cleaner it started right up and still runs like a demon. It is all the build quality, but there is no substitute for maintenance. Pay me now or pay me later.
@INSIDEHOUSEGARAGE
2 жыл бұрын
very nice saying.
@gort5583
4 жыл бұрын
Taking good care makes a difference. Cleaning after use and using the right mixtures and oils. B ut higher price can also mean better quality parts .
@INSIDEHOUSEGARAGE
4 жыл бұрын
Well said Gort55. Thanks for the comment I appreciate it
@jonathanbenoit8828
4 жыл бұрын
You are so right about that
@Aussie1964
6 ай бұрын
You forgot to adjust the three screws on the Carby. LA (idle speed) L (low mixture) and H (high mixture). This is often a problem as I found on mine. They can end up being "out" after much usage of the machine and need to be re adjusted. There are videos out there showing how to do this.
@INSIDEHOUSEGARAGE
6 ай бұрын
I think you're talking about making adjustments to compensate for issues with the carb or the engine? If so, you can try but you can only adjust so much to make up for s diaphragm that's beginning to harden up.
@67L48
Жыл бұрын
As of 2023, a top end rebuild kit costs about $30. I’m not a small engine guy and never rebuilt anything and it took me about 45 minutes to rebuild the top end of my FS80. Carburetors, if you need one, cost around $15. It’s much, much cheaper to fix one of these than buy new. BTW, that fuel looks exactly like my mixed gas using Stihl HP at ~45:1. I doubt it was bad gas or low oil. If you take the piston out, you can tell from a few different failure modes based on where the wear marks are (intake side vs exhaust side, e.g.).
@INSIDEHOUSEGARAGE
Жыл бұрын
thank you for letting us know.
@Rein_Ciarfella
2 жыл бұрын
In answer to your question, I'm guessing these machines last longer only due to superior build quality. After working on a couple older Poulan chainsaws with most Torx fittings at T25 I was pleasantly impressed to find that an FS110R had T27 fittings to do the same jobs as well as being more consistent throughout the machine. I had the above FS110R given to me in abandoned condition with some obvious issues visible externally. My research lead me to this video because I want to learn all I can about this type and make of machine before digging into it. I didn't read through all the comments here so I don't know if anyone mentioned these things, but I'm wondering whether your machine is NOT actually a total loss. Low compression reading aside for the moment, the air filter might be clogged internally and still not obvious on the outside, although that one did look pretty dirty to me. I just bought my first-ever ultrasonic cleaner and one of the first tests I want to do is run this similar type of air filter through it to determine how effective the recommended cleaning methods really are. I already used brake clean and air to get most of the debris and oil out of it and then washed it in warm soapy water, rinsed and dried well, so my test will hopefully yield some definitive results. Next thing I noticed (which seemed pretty obvious to me) was the excess carbon buildup in the exhaust port. Between the intake and exhaust being clogged I question whether this machine might have kept running if they were thoroughly cleaned. Then there's the issues several people have mentioned - I would have removed, disassembled, cleaned and inspected the carb to confirm that it wasn't a carb issue like a pump or metering diaphragm, needle seat or filter screen that prevented it from continuing to run. Frozen piston rings are another thing that really seems to point to low compression, shiny or dull appearance notwithstanding. Since it had such good build quality I definitely would have put time into trying to give it a second chance at life. I would have pulled the head and pulled the drive shaft to inspect that as well as rotating it to confirm clutch, etc. condition at the other end.
@INSIDEHOUSEGARAGE
2 жыл бұрын
thank you Rein Ciarfella, yes it's not a total loss, I intend on rebuilding it
@AlexPomesky
4 жыл бұрын
I feel like it's a mix of good parts and better care. But eventually they do die off. An old fs90r that i had as a parts weedeater was so worn out you could spin the engine over with your hand effortlessly.
@INSIDEHOUSEGARAGE
4 жыл бұрын
Very well said. They don't last forever.
@Libertyandjusticeforallusa
3 жыл бұрын
Thanks for your help
@INSIDEHOUSEGARAGE
3 жыл бұрын
No problem and thanks for the comment
@pauljohn5554
3 жыл бұрын
Good video. I take care of my equipment, used and new cause they are expensive to buy and I need to protect my investment
@INSIDEHOUSEGARAGE
3 жыл бұрын
nicely said. I wish more people felt the same way.
@liammulligan1279
3 жыл бұрын
I just bought the same machine .it was parked up for 5 years .it starts and runs well .but when I stop it and try to start it again it won't start until it cools down. There is also a hole in the bubble squeezer.
@INSIDEHOUSEGARAGE
3 жыл бұрын
I do believe it just needs a carb adjustment.
@liammulligan1279
3 жыл бұрын
@@INSIDEHOUSEGARAGE thanks for the advice . Do you have a step by step guide video on your channel of how to do this ?
@INSIDEHOUSEGARAGE
3 жыл бұрын
@@liammulligan1279 I have videos where I tune the trimmers I get working, However, I don't have a video discussing the general tuning basics as each piece of equipment is unique.
@stevehertz4878
4 жыл бұрын
I have a sthle vs 90 r got at American in town I run with free fuel and VP oil and runs great. Fuel is important and so is high quality oil.
@INSIDEHOUSEGARAGE
4 жыл бұрын
you are absolutely correct
@samuelvelez1643
4 жыл бұрын
Some people (like me ) take good care of their own lawn tools, that's why some brands last longer
@INSIDEHOUSEGARAGE
4 жыл бұрын
I believe you're completely correct
@EddieLindsay681
3 жыл бұрын
I feel expensive Equipmemt has better Q&C so you have a much better chance of getting a well built machine but honestly if you take care of a cheap trimmer it will last a long time as well.
@INSIDEHOUSEGARAGE
3 жыл бұрын
you stole the words right out of my mouth
@kennethslaughenhaupt1681
4 жыл бұрын
I like my Husqvarna. Believe it it not. I use a 128ldx with an old craftsman pancake head attachment. It's so well balanced that I kinda get angry if I have to use another half shaft.
@INSIDEHOUSEGARAGE
4 жыл бұрын
You can't argue about a well balanced trimmer. Makes its comfortable to use.
@bobrobinson369
4 жыл бұрын
Probably last longer because of a little of both. They are made better and people take better care of them.
@INSIDEHOUSEGARAGE
4 жыл бұрын
I agree with you Bob Robinson. Thanks for the comment I appreciate your time
@Smiley1401e
4 жыл бұрын
They are like a Diesel engine they can take a heck of a beating over years before dying. (They casually worker doesn’t know much except get off truck mow and on to the next yard.)
@INSIDEHOUSEGARAGE
4 жыл бұрын
very true. Thanks for the comment.
@DP-hy4vh
4 жыл бұрын
Did you turn out the low speed screw on the carburetor? Sometimes they have to be adjusted. It's also possible the idle screw is turned out too far and it's bogging down due to lack of fuel. Taking the carb apart and cleaning the insides with carb cleaner also helps.
@INSIDEHOUSEGARAGE
4 жыл бұрын
with its low compression adjusting the carb will not yeild much results
@jonathanbenoit8828
4 жыл бұрын
Great machine 👍👍👍, I have the same weedeater, love it ❤️❤️ super nice 👍👍.
@INSIDEHOUSEGARAGE
4 жыл бұрын
Me too.
@WV591
4 жыл бұрын
even the inexpensive trimmers can last a long time if people would use only ethanol free gas and correct mix radio and before storage for the winter, drain all gas an and dry carb. on carb, the metering diaphragm dries out of shape in long storage and when it's replaced,95% of times it's replaced with a wrong one that doesn't have the same size center metal stud. that means the lever will never completely close and carb will not run correct no matter how much adjustment.
@INSIDEHOUSEGARAGE
4 жыл бұрын
Well said. Thanks for the comment I appreciate it
@billmcgee3546
3 жыл бұрын
Mix oil 40:1 for everything. If you follow instructions on 2-cycle equipment from different manufacturers you need 32:1 up to 50:1 Mix everything 40:1 and you'll be good
@INSIDEHOUSEGARAGE
3 жыл бұрын
I completely agree with you
@johnunsicker7440
2 жыл бұрын
Just make sure you use good 2-cycle oil.
@jonathanbenoit8828
4 жыл бұрын
Good work 👍👍👍
@INSIDEHOUSEGARAGE
4 жыл бұрын
thank you i appreciate that.
@axelec
4 жыл бұрын
I think all of the things mentioned contribute to the life of any machine. However, the most important is machine abuse and there are many way to do that...Take care of what you got and it will take care of you !!!
@INSIDEHOUSEGARAGE
4 жыл бұрын
very well said axelec for the comment I appreciate it.
@hectorrubio7254
Жыл бұрын
Ol' Stihly is prolly camera shy.. 😂
@yoboi5775
4 жыл бұрын
Still a keeper
@INSIDEHOUSEGARAGE
4 жыл бұрын
Oh yes I'm not throwing this one away. It will definitely be rebuilt.
@jonathanbenoit8828
4 жыл бұрын
It's worth the money and the time.
@INSIDEHOUSEGARAGE
4 жыл бұрын
It most definitely is. Thanks for the comment I appreciate it
@mastermason4766
3 жыл бұрын
I have an FS80, it runs perfectly with no issues, except it won't start while it's warm. Any fixes?
@INSIDEHOUSEGARAGE
3 жыл бұрын
I'm leaning towards a carb adjustment issue, Either there's too much fuel or not enough. but if I had to guess, theres too much fuel because warm engines don't need the extra fuel to stay running.
@poejalmer8108
3 жыл бұрын
Sorry if this is somewhere below - what would cause the air filter to be soaked in fuel? I bought an old fs76 and fuel drips past the orange choke semi circle if the strimmer is turned upside down? Any suggestions appreciated, thanks
@INSIDEHOUSEGARAGE
3 жыл бұрын
sure, then carb is leaking fuel. either the pumping diaphragm isn't sealing like it should or the metering diaphragm isn't returning to position like it should. The best option is to just replace the carb.
@juanagustincarrion1497
3 жыл бұрын
In my opinion, i think they last longer for being well built
@INSIDEHOUSEGARAGE
3 жыл бұрын
I absolutely agree with you. Thanks for the comment I appreciate it
@scootertuningfl2174
4 жыл бұрын
Put oil in the plug hole and run 32:1 gas 85% chance it will run please consider making a video testing this
@INSIDEHOUSEGARAGE
4 жыл бұрын
Okay cool thanks for the tip. I'll consider it but it probably won't be up for a month or so.
@wallacetom1
3 жыл бұрын
I have a Stihl FS36 Curved shaft Trimmer that I purchased in 1996> I always performed maintenance on it. This season it started and ran fine . But after the first run it became hard to start. I Changed out fuel lines, filter and primer bulb. Checked spark aresstor which was fine. Checked compression which was 75 psi. Cleaned and rebuilt Walbro carb WT160B using Walbro Kit K20-WAT. Still hard to start but when it does run it it works well until you try to get it to idle. Any suggestions? What is the relationship between the L Screw and the Idle speed adjustment?
@INSIDEHOUSEGARAGE
3 жыл бұрын
yes, your low compression is no helping the engine run like its supposed to. as for the L screw and idle, when you add fuel, it will lower your engine speed, so you need to adjust the idle screw to compensate.
@doraescalante8663
4 жыл бұрын
Hi home garage I’m crying this weed eater is my favorite type I’m so sad;(
@INSIDEHOUSEGARAGE
4 жыл бұрын
I know so sad.
@edhoover996
3 жыл бұрын
You gotta take care of your equipment ! ! Especially the right mix for your equipment ! ! Run it lean-- this is what happens ! !
@INSIDEHOUSEGARAGE
3 жыл бұрын
so very true Ed Hoover. Thanks for the comment I appreciate it.
@davidj.furtney4189
4 жыл бұрын
Hello-My 110R is a great trimmer,but, even with great maintenance, my machine warms up and will not start. Then when it starts up after many tries it will not throttle up -take a few minutes to come up to full throttle-what can be the problem-the shops don't know? thanks
@INSIDEHOUSEGARAGE
4 жыл бұрын
try replacing the carb and see if it works better.
@davidj.furtney4189
4 жыл бұрын
Thanks I will try that and have a good one, what size carburetor is needed?
@johncitizen3927
Ай бұрын
Clutch time ?
@INSIDEHOUSEGARAGE
Ай бұрын
would seem so
@monkyshine5543
4 жыл бұрын
Looking to see if you pull engine down to do overhaul or is it never cost effective.?
@INSIDEHOUSEGARAGE
4 жыл бұрын
im still looking into the cost
@devilsoffspring5519
4 жыл бұрын
If you like doing that sort of thing, it's kinda fun to do anyway. An expensive engine (such as a Stihl, Husky or other high-priced make) is worthwhile pulling apart because if the piston & cylinder are trashed, it's possible to get aftermarket cylinders and pistons which are cheaper than originals and often perfectly good enough for home use. If you use the engine for a living, it might be worthwhile getting factory original repair parts, but the cheaper stuff on Ebay or Aliexpress might be fine for lighter use. After you're done replacing the junked piston/cylinder, crankshaft seals etc. make sure you put oil in the gas!!!
@paulstir
4 жыл бұрын
I have the fs 55 I’m getting around 20mins of use then it won’t start back up ( had it for 4 years) and maintain around 20 gardens, it’s had a carb clean new gasket & diaphragm has compression , new file filter & lines and a new tank , spark changed , flywheel cleaned & coil any suggestions guys ??
@INSIDEHOUSEGARAGE
4 жыл бұрын
can you explain how it stops running at the 20 minute mark? do you change the fuel lines or did someone else do it?
@paulstir
4 жыл бұрын
I have carried out all work on it , 20 minutes is a ruff estimate of the running time ( but operates perfectly until this point )
@INSIDEHOUSEGARAGE
4 жыл бұрын
@@paulstir so it just stops running or is there some chugging or anything else?
@paulstir
4 жыл бұрын
100% dead doesn’t even fire up little
@sbirdranch
4 жыл бұрын
@@paulstir mine just started doing the exact same thing. Runs like a champ for about 20 minutes, then it will come down to idle and die. No restart. Acts to me like someone threw the kill switch. Won't even think about restarting. No clue.
@jonathanbenoit8828
4 жыл бұрын
Th is a grown man machine 👍👍👍👍
@INSIDEHOUSEGARAGE
4 жыл бұрын
I absolutely agree with you
@johnwakeford3818
3 жыл бұрын
Purchased stihl fs 56 rc 5 months ago. Use it twice a week. Have had 1 day where machine didn't cut-out on me. Most times it will happen 10 times in a 20 minute period. I don't run it at full throttle very often but it will cut-out at any speed, even full throttle. When moving from 1 area to another and you release the trigger, it dies, not all the time but sometime. Engine can be cold or hot. Had it back to dealer 3 times and of course, it doesn't happen there. Using regular gas and stihl oil. Any suggestions as to problem or solution.
@INSIDEHOUSEGARAGE
3 жыл бұрын
typically when it dies during usage its running out of fuel. i would suggest turning the L screw about a quarter turn counterclockwise and turning the idle screw clockwise about half a turn to it doesn't die from the introduction of more fuel.
@johnwakeford3818
3 жыл бұрын
thank you for your comments, will try what you suggested@@INSIDEHOUSEGARAGE
@INSIDEHOUSEGARAGE
3 жыл бұрын
@@johnwakeford3818 cool let me know how it goes
@jonathanbenoit8828
4 жыл бұрын
That's a massive mule and a monkey 🐻🦁 love it ❤️❤️❤️❤️❤️❤️ sweet
@INSIDEHOUSEGARAGE
4 жыл бұрын
Me too
@hikemoreh96pro
3 жыл бұрын
good infos! i just subscribed
@INSIDEHOUSEGARAGE
3 жыл бұрын
Thanks for the sub!
@antbartolomeo6643
3 жыл бұрын
I have a stihl fs91r trimmer and it quit today when I was using it full throttle when I was edging a yard. I had it on its side kind of over my shoulder since I was edging but it lost power and died. Started it again and it ran for a few seconds and it died again. It’s only a few weeks into the season and it’s a brand new trimmer why would it do that?
@INSIDEHOUSEGARAGE
3 жыл бұрын
what probably happened is the way you were holding it the trimmer caused the gas to go into the tank Vent. That would keep air from entering the tank and not allow the Fuel to make it to the carb. put the trimmer back on the ground and open the gas cap, close it again, prime the fuel system and then try starting it.
@antbartolomeo6643
3 жыл бұрын
Thanks man!
@INSIDEHOUSEGARAGE
3 жыл бұрын
@@antbartolomeo6643 no problem
@bluesfoxpix
3 жыл бұрын
Thanks for this tip.
@calvinsmith3697
3 жыл бұрын
Pls show me the cable setting in place
@INSIDEHOUSEGARAGE
3 жыл бұрын
Could you reference a time stamp in the video. I'm not completely sure what your asking about. Thanks
@rickthelian2215
2 жыл бұрын
Unfortunate, it is just in the range of the high end of home use for a Stihl Trimmer, or very low end on a Professional side. Never less not using good quality Stihl oil, perhaps a cheaper brand didn’t help in this case, though mixing should be done more accurately. I would of loved to pick up a Stihl, need a gearbox for my first Stihl FS55, now I use an FS85. Repair cost where too expensive so was just better to buy new pay a bit more and upgrade, and the other reason they stopped putting the grease nipple on the FS 55 gearbox. Memory repair was about $225 with parts and new was $250 and the Fs55 was $350 Australian Dollars. My Fs55 was around Ten years old and used frequently it was a no brained to replace it.
@INSIDEHOUSEGARAGE
2 жыл бұрын
Thank you Rick Thelian, do you not want to buy an off brand gearbox?
@rickthelian2215
2 жыл бұрын
@@INSIDEHOUSEGARAGE I know there’s an China knock off $60 or so, I did buy a Kombi brushcutter attachment rand new off a friend for $50, worth $200 but ended up buying a Kombi Km55 Engine new on Marketplace, $60, a steal, so that idea is out the door.now, so I thought I may find one with a damaged engine for the gearbox. May fin one yet😀 It’s more a hobby fix, but I’ve been gifted many FS 38 and even FS45C but all bent shafts, but amazing I brought most of them back to life easily with only little cost, one of the may need a nock off carby😀
@INSIDEHOUSEGARAGE
2 жыл бұрын
nice work Rick Thelian
@js_1995x
4 жыл бұрын
Stihl, Echo, and Husqvarna last longer because Weed Eater and MTD stuff such as Yard Machines, Yard Man, Troy Bilt, Craftsman, Murray, Bolens, and Remington is poor quality
@INSIDEHOUSEGARAGE
4 жыл бұрын
You're right there is a definite difference in build quality. Thanks for the comment I appreciate it
@michaelenglish3348
4 жыл бұрын
Hey I gotta question when I went to the shop to get my throttle tigger fixed they also find that my carburetor is boggling down so do that mean I need a new carburetor?
@INSIDEHOUSEGARAGE
4 жыл бұрын
possibly but I would try and adjust the carb first
@francisraman4400
3 жыл бұрын
compression wud hav increased had oil been added to fuel n cud hav run with som carb adjustments but yea slightly worn. jus saying
@INSIDEHOUSEGARAGE
3 жыл бұрын
Yes I think I'm going to try and add a bit more oil to see if I can get it to run again. Thanks for the comment I appreciate it
@matthewgrigg576
3 жыл бұрын
Learn how to spell.
@francisraman4400
3 жыл бұрын
@@matthewgrigg576 Hahaha.Is dat da best u cud do? get real maan!
@francisraman4400
3 жыл бұрын
@@INSIDEHOUSEGARAGE the other thing id check are the seals on crankshaft .jus visually note if its oily around it cos air fuel mixture is transferred thru dry crankcase into combustion chamber n if seals r leaky thn it probably wont start also.jus som pionts to kip in mind
@INSIDEHOUSEGARAGE
3 жыл бұрын
@@francisraman4400 I appreciate the tips thank you
@Greebs
4 жыл бұрын
Top 10 Saddest Deaths in the Marvel Cinematic Universe
@INSIDEHOUSEGARAGE
4 жыл бұрын
I see what you did there. Thanks for the comment I appreciate it
@Marty1959
3 жыл бұрын
Still love my echos
@INSIDEHOUSEGARAGE
3 жыл бұрын
they are ranked at the top for me too.
@winstonclarke9221
4 жыл бұрын
Proper Maintenance, is the key, for a weed wacker.
@INSIDEHOUSEGARAGE
4 жыл бұрын
i totally agree
@marvinelder3828
2 жыл бұрын
My fs 56 quit running suddenly. I have replaced plug, air filter, fuel filter. and checked spark arrestor which was clean. Not sure what direction to head now.
@INSIDEHOUSEGARAGE
2 жыл бұрын
do a test start by putting some Fuel into the carbs throat to make sure your engine will still run
@alvinjoseph8724
3 жыл бұрын
My 85 starts idle but would only take a rev up to a surtain point then cut off , what do u think my poblem could be?
@INSIDEHOUSEGARAGE
3 жыл бұрын
I would remove the spark arrestor screen and inspect it. If that was Okay I would try to adjust the carb and if that didn't work, I would replace the carb.
@alvinjoseph8724
3 жыл бұрын
@@INSIDEHOUSEGARAGE thanks much have done all of the above so i will take u up on changing the carb , thanks again👍👍👊
@INSIDEHOUSEGARAGE
3 жыл бұрын
@@alvinjoseph8724 no problem
@delsonsealys4793
3 жыл бұрын
I have one of those I rebuilt it but it still doesn't start
@INSIDEHOUSEGARAGE
3 жыл бұрын
Can you confirm that it has compression with a Guage?
@arionborosa8638
Жыл бұрын
I am arion I am 12 years old ,I saw my grandfather had a Murray 22 mower and It weren't starting ,so I watch some of your vids and I fixed it,then he had a dunsh laser brush cutter so I tried to start it but it didn't I Chang the spark plug ,new gas new carb but still won't start .Can u give me some advice
@INSIDEHOUSEGARAGE
Жыл бұрын
sure, do a compression test.
@elijahnorris6760
Ай бұрын
I was wondering if it is safe to run 40:1 in 50:1 equipment
@INSIDEHOUSEGARAGE
Ай бұрын
nothing wrong, just keep an eye on carbon build up on the spark arrestor screen
@elijahnorris6760
Ай бұрын
@@INSIDEHOUSEGARAGEOk thank you so much
@elijahnorris6760
Ай бұрын
@@INSIDEHOUSEGARAGEI’m trying to get better at mixing gas but I thought it might’ve been easier just to mix 40:1 for all of my equipment because I have some equipment that requires 40:1
@RussellBooth1977
4 жыл бұрын
I'm pretty sure people who buy a $400-$500 trimmer would want to take better care of it than they would if it's a cheap one !
@INSIDEHOUSEGARAGE
4 жыл бұрын
You would think so. I think this time they had a lapse in judgement and just grabbed the wrong gas can.
@azurplex
3 жыл бұрын
They MUST be built better. Have you SEEN the way manual labor treats equipment? You said yourself that the previous owner kept it outside. Most likely some guy filled it from the wrong gas can.
@INSIDEHOUSEGARAGE
3 жыл бұрын
you might be right
@dkruz1
2 жыл бұрын
Where can I find a piston, rings, cylinder kit for a Stihl fs70? I don't need a new one (too expensive), a rebuilt one should do.
@INSIDEHOUSEGARAGE
2 жыл бұрын
if you don't want to spend a lot of money, I would try Ebay.
@hunter1953
4 жыл бұрын
I do believe people take care of more expensive equipment and wont spent that kind of money if they didnt. All you have to do is work on a Stihl and you can see the difference between it and a 99 dollar model .
@INSIDEHOUSEGARAGE
4 жыл бұрын
You are absolutely correct. I would try very hard to make sure my investment is well take care of. Thanks for the comment I appreciate it
@wM70AB
4 жыл бұрын
Hey there IHG, love the channel and I have two questions for you. Where do you get all your equipment for the vids? What is your favorite source for parts? Thanks
@INSIDEHOUSEGARAGE
4 жыл бұрын
mainly friends and family. Amazon is my go to right now
@dizzolve
4 жыл бұрын
what should the gas look like
@INSIDEHOUSEGARAGE
4 жыл бұрын
More color. This one is so light in oil that its looks like regular gasoline.
@ismaelcarrillo3956
4 жыл бұрын
They sell plastic mixture ratio bottles at Home Depot for this.
@shawndubay4050
2 жыл бұрын
Better build quality and generally people take better care of them. I would rebuild this trimmer with a new genuine stihl cylinder and piston. I would break in the new cylinder and piston easy like a brand new engine. It will last you a lifetime with proper care and the right fuel and oil mixture. Would definitely not use this as a parts trimmer. This model is known for its high power and reliability. The fs-94 and km-94 are the new and improved version of this same trimmer.
@INSIDEHOUSEGARAGE
2 жыл бұрын
thank you Shawn Dubay.
@theidiotbricker
4 жыл бұрын
I think it’s the brand name and supposedly it’s build slightly better
@INSIDEHOUSEGARAGE
4 жыл бұрын
I agree with you. They seem to be built with higher quality materials. Thanks for the comment I appreciate it
@garybentley2540
4 жыл бұрын
I have a huqvarna weedeater,I put a new carb,gas lines,fuel filter and spark plug in it,it will only run about 30 seconds and quit,Its adjusted and will run but quit,help please
@INSIDEHOUSEGARAGE
4 жыл бұрын
try replacing the fuel cap. its air vent might be stuck closed.
@garybentley2540
4 жыл бұрын
@@INSIDEHOUSEGARAGE Thanks I will try that,I feel like I tried everything I could think of
@INSIDEHOUSEGARAGE
4 жыл бұрын
@@garybentley2540 let me know how it goes
@garybentley2540
4 жыл бұрын
@@INSIDEHOUSEGARAGE I don't have a. new cap but I loosend the cap and that didn't work,does it have to be a new cap because I have to order it,Thanks
@brucelaw7324
4 жыл бұрын
Wherer can I get a recoil for my trimmer like that it
@INSIDEHOUSEGARAGE
4 жыл бұрын
I would order it on Amazon. Saw one for less than $10.
@brucelaw7324
4 жыл бұрын
What is the model no of this trimmer
@INSIDEHOUSEGARAGE
4 жыл бұрын
Fs80r. Did you want more than just that?
@brucelaw7324
4 жыл бұрын
How do you put the recoil spring back in this one
@brucelaw7324
4 жыл бұрын
@@INSIDEHOUSEGARAGE yes
@INSIDEHOUSEGARAGE
4 жыл бұрын
I haven't had to do one before. I'll look here in a bit to figure it out tho.
@INSIDEHOUSEGARAGE
4 жыл бұрын
If you didn't already get the recoil off then remove the orange top cover, remove the other 2 boots on the recoil then remove it from the engine. Next them the screw in the middle of the white part where the rope goes. Then lift out the white part and you'll see the broken recoil spring. After that I can't help as you'll need to keep the spring wound .
@phill1074
2 жыл бұрын
Shouldn’t you compression test a warm engine?
@INSIDEHOUSEGARAGE
2 жыл бұрын
sure, but If you do warm, why not do it cold to because that's how it's going to be, when you use it for the first start of the day.
@jonathanbenoit8828
4 жыл бұрын
That's why I still mix 16;1
@INSIDEHOUSEGARAGE
4 жыл бұрын
Wow that's a lot of oil but it must be working for you. Thanks for the comment I appreciate it
@jonathanbenoit8828
4 жыл бұрын
Most cases that happens when you don't have enough oil in the fuel.
@INSIDEHOUSEGARAGE
4 жыл бұрын
its unfortunate but your are correct
@aidanasmr5099
2 жыл бұрын
I know you try to fix it though but it just a mess...
@matthewgrigg576
3 жыл бұрын
Rebuild it
@INSIDEHOUSEGARAGE
3 жыл бұрын
Thank you Matthew Grigg
@beauvaughan9771
2 жыл бұрын
Or they're just stupid enough to not check if it's 2 stroke or not
@scootscoot1920
4 жыл бұрын
My answer is, great German quality!
@INSIDEHOUSEGARAGE
4 жыл бұрын
Great answer
@dominoespizza1756
3 жыл бұрын
My answer is, great Japanese quality!
@scootscoot1920
3 жыл бұрын
@@dominoespizza1756 Japan makes an engine that will last for ever in any harsh conditions.
@dominoespizza1756
3 жыл бұрын
@@scootscoot1920 yeah I've seen that many times
@benjaminbarger2903
3 жыл бұрын
They aren’t mass produced and are built with quality and care and not efficiency of how many are being built in a day
@INSIDEHOUSEGARAGE
3 жыл бұрын
Thank you Benjamin Barger
@CuriousKL
3 жыл бұрын
In my experience, the customer starts out from day 1 using crap 2 cycle oil.
@INSIDEHOUSEGARAGE
3 жыл бұрын
that's a good possibility
@chakravarthithumati2426
2 жыл бұрын
better quality
@INSIDEHOUSEGARAGE
2 жыл бұрын
thank you for the comment Chakravarthi Thumati
@two-strokeworkshop1154
Жыл бұрын
Is it bad to run it on choke
@INSIDEHOUSEGARAGE
Жыл бұрын
Yes, there wouldn't be any power when squeezing the trigger and the extra fuel would cause excess carbon build up
@two-strokeworkshop1154
Жыл бұрын
@@INSIDEHOUSEGARAGE ok
@kennethslaughenhaupt1681
4 жыл бұрын
Oh, I thought all still trimmers won't stay running.
@markkothefarmer4735
4 жыл бұрын
My one sometimes flood so I have to pull out my sparkplug
@INSIDEHOUSEGARAGE
4 жыл бұрын
It happens sometimes. Since it floods so easily have you tried starting it without choking it?
@markkothefarmer4735
4 жыл бұрын
Yes
@markkothefarmer4735
4 жыл бұрын
And I have sthil fs 75 you have fs 80R
@INSIDEHOUSEGARAGE
4 жыл бұрын
@@markkothefarmer4735 thanks for the information
@dujeamizic3588
4 жыл бұрын
I have the same problem with my old trimner fs 85t and i went to service to fix it.Unfortlently i have no suxes with new parts so i have to buy new trimmer
@INSIDEHOUSEGARAGE
4 жыл бұрын
That's a shame but I understand your situation. Thanks for the comment I appreciate your time.
@lawncarett5398
2 жыл бұрын
Do you still have this it could really help me with spare parts
@INSIDEHOUSEGARAGE
2 жыл бұрын
no it's long gone
@lawncarett5398
2 жыл бұрын
@@INSIDEHOUSEGARAGE ok thanks anyway
@INSIDEHOUSEGARAGE
2 жыл бұрын
no problem.
@melvinthemechanic
4 жыл бұрын
Do a rebuild
@INSIDEHOUSEGARAGE
4 жыл бұрын
That's quite a job thanks for the comment I appreciate it
@heathwilson2572
3 жыл бұрын
It’s not worth it to get fixed . It’s better to buy new trimmer
Пікірлер: 296