That's a well behaved airplane you have there. Great maiden!
@n1114v
Жыл бұрын
Thanks!
@gary-qn7wu
Жыл бұрын
That was what my airforce pilot dad would call "greasing it in" most impressive! Found out the bigger the bird,throttle management is absolutely imperative nice maiden, and a good looking plane!
@WilliamCChapin
Жыл бұрын
It was super nice over here in Jackson!
@aussierc6788
Жыл бұрын
Great to see the Airtronics transmitter being used for guidance.
@n1114v
Жыл бұрын
Love Airtronics!
@michaelamundson3367
Жыл бұрын
Thanks for sharing! Looks great!!
@richardrottenberk7133
Жыл бұрын
Nice flight keep up the good work
@williamnybakken1486
Жыл бұрын
Very nice Andy!
@woutersmith7616
Жыл бұрын
Great Stuff Andy,well done. You look healthier and happier then previous👍🛩️😆
@n1114v
Жыл бұрын
Well, I've recently lost 45 pounds and hoping to lose 45 more
@woutersmith7616
Жыл бұрын
@@n1114v the proof is in the pudding😆😆👍
@Song-Dog-Archery
Жыл бұрын
Nicely done
@vulturedroid9804
Жыл бұрын
Congrats lovely build.
@stevejohnson1871
Жыл бұрын
Great looking stick and great engine combo
@NateG3678
Жыл бұрын
Now that’s a nice flying Big ol Bird buddy!! Another chevron landing as well 😎
@n1114v
Жыл бұрын
Shes a sweetheart
@doretheathomas8197
Жыл бұрын
W0W…. I thought that I was the only one that still had thatAirtroncis Radio. just got it back from Soto racing where they replaced a couple of my switches. I do now have the ix12.. that I will be putting all my planes on.
@frez777
Жыл бұрын
Looks like fun and a great day for it. I love those Stiks
@furball5553
Жыл бұрын
That's to funny that anyone would say anything you have forgotten just today alone more than 99% even know I thought dam she is growing and sounds amazing dam cool Bird hope to see more of her in future vids I got to say what a relief it is you didn't stop a year or two ago great flying Andy 👍✌️
@n1114v
Жыл бұрын
Its day by day!
@daleyahnke7215
Жыл бұрын
Sweet airplane!!!!! thanks for sharing!!!
@SIDESLIP
Жыл бұрын
Looking good, Andy.
@n1114v
Жыл бұрын
Thabks Bert!
@robertcovell2787
Жыл бұрын
I like the sound of that engine, leave it rich. Seem like we all getting some nice flying weather. There was 3 of us down on the river today. You know you had a good day when you burned over 1/2 gallon of fuel in a little K&B .61
@n1114v
Жыл бұрын
Hell yes!
@furball5553
Жыл бұрын
Holy smokes 1/2 gallon in a .61 nice sounds like great fun very jealous 👍✌️
@robertcovell2787
Жыл бұрын
@@furball5553 Yup!!! I'm in Canada so the river is frozen. Awesome runway!!!
@knockoffs
Жыл бұрын
Andy, love those engines, have 4 stingers. And love your videos as well. Keep my late night ipad content alive please. Better then bullshit TV.
@n1114v
Жыл бұрын
I have plenty of content to keep you busy for a long long time
@tdogrc
Жыл бұрын
Great landing 👌🏻
@billjones3071
Жыл бұрын
Great landing!!!!
@craigbeaven8445
Жыл бұрын
Andy , Back in the day I had a P.C. sport , with an Q-50 for power , a P.C. 300 with an Brison 2.6 for power , both flew nice , an I see you have an Airtronics 10-G , Damm if I have one as well !!
@n1114v
Жыл бұрын
Great radio! My first 2.4
@Scotthays-kz3ct
Жыл бұрын
Andy I have looked on the AMA site where you mentioned you got the plans for the Prime Stick however I cannot locate them on their site. Do you happen to know the plan number as I may be able to locate it that way. Great looking plan! Thank you for any help you can provide.
@n1114v
Жыл бұрын
Search for prime cut and it will be listed as prime cut (no wing plan)
@kevinquig5654
Жыл бұрын
Andy, another beauty! I'm always amazed at how an expert Monokote finish can bring such clarity in the air. My first covering jobs looked like you were chasing a 1/2A plane using a kaleidoscope and beer goggles. Much worse when they were airborne. Thanks again for your tips on my DLE for my almost completed 4 Star. I bought a 3D printer and fashioned some winglets for it. One more thing for the rake I purchased to collect after the maiden. Should I get this motor leaned a bit on the ground? Thanks again for your vids and tutorials!
@n1114v
Жыл бұрын
You can lean it out before the maiden if you have broken in the engine already. If not, get it close but still a little rich and lean it out over a few flights
@BKD70
Жыл бұрын
Hey Mr. Andy, I just found your channel today, I was looking up "Stinger Engines", and you were doing the first look at the Stinger 40... and I heard you mention "Prime Stik". I'm a huge fan of Stik airplanes, so I had to dig deeper. This is the first time I've heard of the Prime Stik... can you give me some more info? Is it a scratch build or Kit, or ??? THANKS!!! Oh.... SUBBED!!
@n1114v
Жыл бұрын
Scratch built from plans by AMA
@BKD70
Жыл бұрын
@@n1114v thanks.
@noellmaster
Жыл бұрын
Dear Andy, do you have the plans for this airplane?? I have a new Supertigre g4500 that I am looking for a simple airplane to put it in. Thanks, Tony
@n1114v
Жыл бұрын
I bought the plans through AMA. You will have to create your own wing, the plan just shows the airfoil
@sjanninck
Жыл бұрын
Nice! 👍🏻
@oggearhound2242
Жыл бұрын
Who has this Prime Stick? Being a Stik fan, I LOVE the looks of this thing!
@n1114v
Жыл бұрын
Hi scratch-built the fuselage from an old set of plans and design my own wing, the kit has been unavailable for about 30 years
@johnleseur3753
Ай бұрын
What is the final flying weight of your Prime Stick?
@n1114v
Ай бұрын
@@johnleseur3753 I never weighed it. Probably around 17 pounds
@Jaxon_durbidge
Жыл бұрын
Hangar tour? Been almost 3 years since last one
@n1114v
Жыл бұрын
Not much is different but...... maybe
@josephlarson7725
Жыл бұрын
Sounds fine on my iPhone.
@n1114v
Жыл бұрын
The high-speed is pretty close but low-speed is still pretty rich
@homestuff2949
Жыл бұрын
what kit is this or how makes it
@n1114v
Жыл бұрын
Fuselage is built from plans, and the wing is my own design
@gwrrolan
Жыл бұрын
@p3arljam26
Жыл бұрын
Andy any way i can get in touch with you ? Do you have a username for flyinggiants or rcgroups?
@n1114v
Жыл бұрын
Unfortunately Facebook is the only other platform that I use.
Пікірлер: 58