if you're looking for the adapters for the helping hands I use, you can find them here! cults3d.com/en/3d-model/tool/5mm-adapters-for-helping-hands
@sethtechproductions
3 жыл бұрын
How did you flatten the teeth on the helping hand?
@transformandgobricks7820
2 жыл бұрын
I've found another and funny way to attach the figure to an Helping Hand ball joint. I use Balloon Straws. Sounds stupid I know but it really works. It takes some work but when your figure won't be holding to the Straw loose but solid, you can use it then.
@TheLazyEyebrow
2 жыл бұрын
@@transformandgobricks7820 doesn't sound stupid at all. whatever works man
@transformandgobricks7820
2 жыл бұрын
@@TheLazyEyebrow Oh, okay, thanks.
@rcwstopmotionproductions
11 ай бұрын
Man I need the schematics for the entire rig it’s self with the only difference being multicolor leds
@ZackXevious
3 жыл бұрын
8 views, 18 likes. The Lazy Eyebrow: a stop motion youtuber so good he violates the laws of physics.
@fartfast4834
3 жыл бұрын
Facts
@justsomerando4905
3 жыл бұрын
I normally couldn’t care less about stop motion, but the way you talk about it is so interesting!
@joaoandlucas5867
3 жыл бұрын
I always get motivated to do one when I watch Someone else's (the Story based ones)
@squidwardproductions5098
3 жыл бұрын
I’m going to do this ........ when I get a green screen lol
@shism28
3 жыл бұрын
@@joaoandlucas5867 yeh while people like Lozaus make great ones, the ones with story are much more enjoyable for me at leats
@justsomerando4905
3 жыл бұрын
@@joaoandlucas5867 yeah, same
@fasih0771
3 жыл бұрын
@@joaoandlucas5867 frr
@TheComicReliefCrusader
3 жыл бұрын
I REALLY love these tutorials!! Still need a tripod...
@darrenbent7601
3 жыл бұрын
This is something I've been wanting to know about for years, especially the stop-motion flying, even from the old Ray Harryhousen movies.
@DevasiaMotion
3 жыл бұрын
Additional note: Rigging is difficult to edit around when your shot requires subjects to change focus, or you're doing dynamic camera shots. I do rigging with my animations and it's fairly obvious in most circumstances, half because I'm a lazy editor and half because I don't really care. One type of animation that this works out really well for is in outer space environments with a black backdrop, especially if you have black display bases for rigging with.
@KRBrickBot
3 жыл бұрын
Green screen also has its uses for one-man army building or scaling down big boys with small bots and vice versa.
@yetanotherspuart3993
3 жыл бұрын
Here I thought you just threw them for flying animation. Also, we need cat-formorer combiners!
@lunarfilms_bricolage
3 жыл бұрын
You forgot the even more low budget version just hold them off camera lol
@TheLazyEyebrow
3 жыл бұрын
That would've been great to cover. I have dabbled in that quite a few times
@animatorxstudios100
2 жыл бұрын
So, so, soooooooo true. I do that as much as possible.
@KhangPrimal
3 жыл бұрын
I still remembered watching your 1st tutorial with the cheating transformation, time flew ! Thanks, your reviews and tutorials are awesome, you are awesome !
@anthonybernero9720
3 жыл бұрын
Ray Harryhausen is very proud of you. Keep up the great work.
@brettjansen8053
3 жыл бұрын
That Soundwave transformation is SOOooo good!
@Ironhide97
3 жыл бұрын
LOVE this series! Keep up the good work Mr. Eyebrow
@lunarfilms_bricolage
3 жыл бұрын
As soon as i read the title i was like HELL YES
@mylesfestG1
3 жыл бұрын
Thank you so much! I've been waiting for this for AGES! :D
@neo1754
2 жыл бұрын
that shockwave transformation is so good
@Phant0mwolf-Productions
3 жыл бұрын
Thank You very much. This helps me a lot!. I can't wait to get to practicing this. From the looks of it though I feel like the rig system will be the easiest for me to work with. Less things to edit out in the end ya know. Again thank you so much for making this series of tutorials!
@TheLazyEyebrow
3 жыл бұрын
That's the ticket
@NPUTsReviewsandStopmotion
3 жыл бұрын
They also make a matte screen and matte green screen paint for green screen effects. Both dont reflect nearly the amount of white light that makes the figs light up green. Its all about what you choose to use as a green screen. Also the most powerful tool for green screen is Adobe Premiere. Its super forgiving. You can also save a ton of time by masking your rig in a video editing software and doing it frame by frame in said software. I love the rig you built! Great idea with the printed pieces
@TheLazyEyebrow
3 жыл бұрын
Interesting. I'm going to have to investigate this
@THEREALNiniPanini
3 жыл бұрын
I see why he is called the lazy eye brow great thing I just figured out :D
@PaulGaither
3 жыл бұрын
Me, who owns a Tripod and will never do this: Interesting.
@ModelsExInferis
3 жыл бұрын
Wow, fantastic tutorial, I will definitely be referring to it at some stage on the future. I have a wicked idea for a Godzilla stop motion I really want to do, I just need the free space... and time! Thanks mate!
@manoftheusajones5147
3 жыл бұрын
Your doing STRONG Eyebrow.
@Bobsheaux
3 жыл бұрын
Oh wow... The soundtrack from the Toy Story 2 video game. Right in the nostalgia! lol
@TheLazyEyebrow
3 жыл бұрын
i'm glad someone recognized it haha
@hayamasterstudio3.0re37
3 жыл бұрын
This is better and more usefull than my socioemotional class
@kirbymarchbarcena
3 жыл бұрын
Nothing's gonna stop TLE from making great stop-motions
@TyphonMar
3 жыл бұрын
Neat! I'm not an animator but it's interesting to learn regardless
@HardbassSoviet
3 жыл бұрын
This guy makes it looks so easy
@steamroddsroundhouse2080
3 жыл бұрын
The ironically name Professor Lazy Eyebrow who teach us great skill. My videos for now on will link your channel so kids can adults can learn how to do this stuff
@srcublordofgames2723
2 жыл бұрын
Thanks these tutorials are always entertaining and super useful
@Slump_WRLD
Жыл бұрын
These tutorials are very helpful since I have a transformers show in the works
@CrosshairsProductions
3 жыл бұрын
Hot damn that is a properly impressive crane rig you got there! I might have to think about setting something like that up for my own stuff! Personally I've found that the Bandai Tamashii clear plastic figure stands are excellent for airborne shots as they work with 5 and 3mm ports as well as the claw grip, the arms have excellent articulation and because they are transparent they often don't need painting over for chroma key. Only think I need to be careful of is gravity and wobbling, so I give the figure a few seconds to settle in frame and weigh down the stand with something hefty if the centre of gravity is off. When I chroma key I shoot purely on green/blue screen, so any (pardon the pun) glaring reflection issues I solve either in post with colour correction or by using white paper which reflects light into the affected areas. Since most of my shots tend to be above-waist height to disguise walking movement I don't often have to worry about editing it out. A friend of mine has used tin foil which is potentially an even better solution. Side note, but I found your previous walking tutorial immensely helpful for my current project 'Target Alpha Trion', so thank you! It helps that Siege Optimus Prime has excellent weight distribution too.
@TheLazyEyebrow
3 жыл бұрын
Siege and Earthrise Prime have incredible weight balance that way. The heels also help tremendously
@Acidstormstudios
3 жыл бұрын
4:18 imagine doing that but your stop motion have 23 FPS (pure torture)
@scorelessbo
3 жыл бұрын
Omg thank you soooo much for this one. I think I have an idea for an experiment to try this out. I can’t wait. Again thank you. I don’t have the computer software as I do everything on my phone but the clean shot and erase the cable I will definitely try as I use that stopmo app
@ThatBigGeek
3 жыл бұрын
Thanks this is going to be very useful
@ZstackZip
3 жыл бұрын
Damn, I’d do a lot of this stuff if I had a computer that could run any editing software
@j-sant-animations8105
3 жыл бұрын
I just upgraded my app and now I too can edit and erase out rigs. Despite my crappy quality, it’s still one of the funnest things to tweak, until the figure gets too heavy to hold a pose and the stand’s joints collapse and I give up
@lowlyoak17
3 жыл бұрын
I’m totally going to try to replicate the rig!
@diegos7337
3 жыл бұрын
So interesting! Thanks for this!
@doomfry680
3 жыл бұрын
Just like your others this is very helpful And just like the others i will be too lazy to follow any of these steps
@fanstfs7661
3 жыл бұрын
This is too much for me..you are truly expert 👍
@Villc.11
Жыл бұрын
Rig is the best
@tsmithdotks
3 жыл бұрын
Just wanted to say thanks for making these videos. They're really informative. Your rig set up is nice. I might give stop motion a try. I've only done still photos so far and I can see that rig being extra handy for some dynamic action poses.
@SentinelBayReviews
3 жыл бұрын
Awesome stuff here, thanks a lot!
@OptimusPhillip
2 жыл бұрын
Based on my experience with digibashing, which (the way I do it at least) involves a lot of layer blending, I have one suggestion to those interested in rotoscoping: consider using layer masks. Not only does this provide something of a safety net, since you can easily correct for any overerasing, but it also allows you to soften the edges and make different elements look less obviously out of place.
@trailbreakertv8918
3 жыл бұрын
Ok do a vid trying this if I can thanks this will be great on my show
@StummJedla
3 жыл бұрын
Thanks : )
@seanclapper9965
3 жыл бұрын
Ppppppppppppt!!!! Too much work. All you need is a ceiling fan and some string. And hey, the more string the bigger the flight path!😊
@dreadnaut1536
3 жыл бұрын
Man I need to get one of these
@juliussloth4665
3 жыл бұрын
IF there is a gigawatt review, I can’t wait
@TheLazyEyebrow
3 жыл бұрын
Eventually
@cedy413
11 күн бұрын
Or you could get a thin string/cable/pole: Old Tokusatsu style
@fen4554
3 жыл бұрын
The Green color used for keying isn't arbitrary. RGB color has a significantly more information in the green than the other colors.
@TheLazyEyebrow
3 жыл бұрын
Interesting. Why is that? I figured there would be equal amounts of value across 1-256
@hughorr
Жыл бұрын
Great video!
@razormatrix8904
3 жыл бұрын
These videos are so helpful for improving my Stop Motion Thanks
@CardboardBots
3 жыл бұрын
Rotoscope thug life.
@Everything_islamic_channel
10 ай бұрын
Thankyou
@pblair12
3 жыл бұрын
Wow!
@gravy2300
3 жыл бұрын
Thanks this helped
@HNEGames
3 жыл бұрын
Three different videos of yours in a row, all of them with Thomas The Tank Engine ads prior to start.
@TheLazyEyebrow
3 жыл бұрын
Odd....
@weebvsreviewch9484
3 жыл бұрын
Since you STARTED EP 1 I STARTED START MOTION PROBLEM IS LIGHTS HAHA STILL I WANT TO LEARN MORE
@tarn9415
3 жыл бұрын
I have Stop motion studio pro on my Phone (Android) and when I use Green Screen on some of my figures like Earthrise Starscream than it covered even him in every background.
@johngolles342
3 жыл бұрын
These rock
@kingslayerx1716
3 жыл бұрын
FINALLY!!!!
@xzx4696
3 жыл бұрын
2:49 now that's my kind of menasor
@bbnnationoriginal2722
3 жыл бұрын
Why do I have to e urge to buy a costume and 4 cats
@jamiebarba5701
3 жыл бұрын
He is a cat combine.
@xzx4696
3 жыл бұрын
@@bbnnationoriginal2722 same lol
@xzx4696
3 жыл бұрын
@@jamiebarba5701 stuntcats lol
@TheLazyEyebrow
3 жыл бұрын
This started as a typo in one of the comments in a menasor review where someone said "all the G1 was was Motormaster with a bunch of cats strapped to him" and this image was born
@ItSaBeastNerd
3 жыл бұрын
Hello lazy!!! Been a while.
@transformandgobricks7820
2 жыл бұрын
-How long have you been building your own rig setup for Stop Motions? -Is there a way to buy one like that? -Where did you buy all the materials you needed?
@TheLazyEyebrow
2 жыл бұрын
I built this one since 2019 Not that i know of Most came from home depot if it wasn't 3d printed
@transformandgobricks7820
2 жыл бұрын
@@TheLazyEyebrow Aa, okay, thanks. I asked cause I may build also such rig setup too for my Tutorials.
@transformandgobricks7820
2 жыл бұрын
@@TheLazyEyebrow Was it hard to build this Setup?
@TheLazyEyebrow
2 жыл бұрын
@@transformandgobricks7820 not really, but i also had the proper tools to cut the tubing, building skills from my construction job, and self taught design skills for the 3D printed parts
@fartfast4834
3 жыл бұрын
Thx for this!!!!!!! It helped so much
@jumpskull
11 ай бұрын
Bro got Toy Story 2 PS1 game soundtrack!
@TheLazyEyebrow
11 ай бұрын
Eeeeyyyy good catch
@optimerprime.29-
3 жыл бұрын
Witch app you use for stop motion I use stop motion studio
@masterboa6321
3 жыл бұрын
Green is the color seen least in nature, eh? What color are plants then?
@Cosmic_Butterfly825
25 күн бұрын
I don't have a pc or computer to do the green screen, is there a way I can on my phone? I have a Samsung
@thansw
3 жыл бұрын
Why does Windcharger have a Part of six gun in battletrap review
@truexenith8596
3 жыл бұрын
So I have a green screen, but it’s on a wall in my room maybe 3 feet away from the actual table I’m going to animate on. Would you say that’s enough distance to not cause problems with keying?
@Gundam_JAY
3 жыл бұрын
Is it possible to just take the rig out ad a separate layer and delete that layer would it save more time than erasing it every frame?
@zkproductions4351
2 жыл бұрын
This doesn’t have much to do with the video but do you know those clear long stands that people use to make their figures jump and fly in their stop motions? I can’t find them anywhere and if you or anyone knows the name that would help a lot.
@djxzgalaxylang7703
3 жыл бұрын
Wow
@badreabdelatif6772
2 жыл бұрын
Very very nice Thank you Thank you for all the explanations and tips Is there a site to buy Transformers games? I loved them.. I hope their price is cheap and appropriate
@lordmegatron7006
3 жыл бұрын
Can you do a green screen episode?
@SkunkLifeMedia
3 жыл бұрын
What do you use to flatten the teeth on the helping hand thingy?
@Quantum_Magnus
3 жыл бұрын
Wait, bright green is used because it’s the least common color found in nature? I see bright green when I walk outside. Why not use purple?
@njr7362
3 жыл бұрын
What fps do you use? Please tell me so I can practice your method also how do you make wheels spin on smooth surfaces
@TheLazyEyebrow
3 жыл бұрын
12
@njr7362
3 жыл бұрын
@@TheLazyEyebrow Oh it looks like you are using 16 or 20 I use 15
@transformandgobricks7820
2 жыл бұрын
How long have you've been Rotoscoping Thrust?
@fellabartholomew768
3 жыл бұрын
what is the software for the final method
@nugget78934
3 жыл бұрын
Sooo what software do u use for the editing??
@Rocka5438
3 жыл бұрын
is next gonna be fighting or driving?
@loconoco3445
3 жыл бұрын
What would be the best way to sand down the claws on the helping hands?
@TheLazyEyebrow
3 жыл бұрын
Just bend em in on themselves with a pair of pliers
@stoopanimation53
2 жыл бұрын
Hey Lazy Eyebrow! I tried making my own ad-bumper recreations with that rotoscoping method, and I was hoping you would check them out. They're not as good as yours, but I still think they're alright. There's only three, and two of them are directly based on ones from the original show. The third one was made completely from scratch with "Optimus and his son" ("Optimus and his son" is my most popular video at somewhere around 3M views so they're a re-occurring part of my channel). The main reason why I'm asking you to check them out is to be as critical as you can with them. I'm assuming it'll be weird for a nice guy like you nitpicking every aspect of someone else's work, but I want to know any flaw with them that you see so that I can avoid those flaws in the future. And since you know what it's like making them, I think you would have an especially good eye for finding what's wrong with them. Though, I know you're helping your wife with her workload right now, so it's completely understandable if you don't have the time. If you do have some time, then here's a playlist of the recreations! kzitem.info/news/bejne/tmmbs5qrgoGidZg
@diegocorradini7072
3 жыл бұрын
Non ho capito molto ma ,c'è tanto lavoro 😲
@ode2236
3 жыл бұрын
What software do you use on your your computer?
@thomasbrian5798
3 жыл бұрын
what do you use to erase
@senor_zero3337
Жыл бұрын
6:12 what is that editor?Photoshop?
@ludwigdelmo979
2 жыл бұрын
Can i do it on phone?
@jordanelbertnathanaelsibue7818
8 ай бұрын
Hey lazy eyebrow, thx for the tutorials, but can you tell me the keyframes for running part? Is it as similar as walking just with more steps or no?
@TheLazyEyebrow
8 ай бұрын
very similar. you're basically just adding another one where the character is airborne between steps
@jordanelbertnathanaelsibue7818
8 ай бұрын
@@TheLazyEyebrow ah thx
@dominusempire2917
Жыл бұрын
Dude what about tape?
@stopmotionyoutuber4599
3 жыл бұрын
5:59 I don't understand what you mean
@scourge_creations
9 ай бұрын
How do you flatten the teeth on the helping hand because some of my figures have slightly gotten damaged and I need to fix that before i keep using the helping hand
@TheLazyEyebrow
9 ай бұрын
Pliers
@scourge_creations
9 ай бұрын
@@TheLazyEyebrowthanks so much! Now my figures won't get damged
@Izaac_Artist
Жыл бұрын
What program do you use to edit your stop motion i use stop motion studio pro but doesnt have a more useful eraser nor a painting over tool and ive also got a samsung book 2 laptop device but never used for anything beside school work what would you recommend ?
@TheLazyEyebrow
Жыл бұрын
4:17
@Zak_films
Жыл бұрын
w@@TheLazyEyebrow
@shockwaveslaboratoryalt5902
3 жыл бұрын
Now transformation
@nterratory9452
3 жыл бұрын
Meowasor!
@transformandgobricks7820
2 жыл бұрын
This black background on your Setup, what is it? Is this a big black paper or something else?
@TheLazyEyebrow
2 жыл бұрын
it's a very thin sheet of polystyrene spray painted in ultra matte camo black
@transformandgobricks7820
2 жыл бұрын
@@TheLazyEyebrow Is/Can be there an alternative for this?
@prime_____Productions
2 жыл бұрын
@The Lazy Eyebrow what software do you use for the green screen
@TheLazyEyebrow
2 жыл бұрын
It's literally in the video haha Mind you, I've also started using after effects to clean up keyed backgrounds
Пікірлер: 179