Why not make cardboard wings and a rubberband-powered propeller and fly it around the track? I bet you will get faster lap times.
@bradcarpenter1881
2 жыл бұрын
Fully embrace the parachute effect and add some wing gliding, I like it 😂
@moereefer
2 жыл бұрын
Go to scorched RC they make a inner fender kit for this and others like Arrma Mojave also. Best Thing ever made I use it for my Arrma Infraction v2. And it’s keeping my car so much cleaner and aerodynamic too. You love it
@PaggiPlumbing
6 күн бұрын
Thank you!!!!!!!!
@S9RUT
2 жыл бұрын
If you have a look at the Flo-Tek bodies, they also have vents ontop of the front fenders.
@elcantante37
2 жыл бұрын
I modified the body of my team associated sc pro2 and works awesome, I made vents on front, pillars, and back!
@seththomas2490
2 жыл бұрын
I cut the side windows out. Helped out a lot
@i4nic256
2 жыл бұрын
Put cutouts on top of the wheel arches, like on the Vendetta.
@dannyrisley4665
2 жыл бұрын
My SCt likes to catch air. I always felt the hood section is the air catch. Looks like you found a work around with inner fenders. Good Vid
@Tommaniscalco1976
2 жыл бұрын
I found that if you cut out the front window triangles too and use plaster mesh tape shoe goo it in.allows for air to go through better.
@gonncalomariamonteiro4176
2 жыл бұрын
Aerodynamics 101 !!! Awesome Class dude...although before installing the inner fenders, you should try cut some slats on the body front wheel wells...to relieive (some) air pressure...IN THEORY. And then fine tune from there. The CoD (centre of Gravity) stays unaffected that way... Cheers mate.
@darrennixon1986
2 жыл бұрын
The senton body posts front and back have 2 hole positions. Definitely drop to the lowest setting. The side of the body sits level with the chassis so will be perfect for 'racing' rather than bashing it.
@randall4411
2 жыл бұрын
Interesting experiment . Three years ago I picked up a senton first but put it down and bought a Granite . Still love it .
@scheers100
2 жыл бұрын
When the wind/air starts to move under the nose of the body, the body deforms(a little) and picks in even more air, I think. And is giving the extreme parachuting. Closing up the front is the way to go.
@jay82bob
2 жыл бұрын
thats what he said :D
@scheers100
2 жыл бұрын
@@jay82bob if the body would be totally rigid (on the car)it would make the parachuting less extreme and more predictable. Ofcourse most of the solution against parachuting is closing up the front.(Like he said)
@rc-daily
2 жыл бұрын
I wonder if the holes didn't help because they can't effectively get all of the air out fast enough.
@ExocagedRC
2 жыл бұрын
Possibly. I got the Scorched inner fenders ordered
@rc-daily
2 жыл бұрын
@@ExocagedRC scorched offers some really nice stuff
@rcsmith5909
2 жыл бұрын
Wow never would have guessed it was up front
@llsoonerll
7 ай бұрын
Ran similar test, same rig, found it was more about throttle mgmt right before launch. Inner fenders would definitely be an improvement
@mikebird8290
2 жыл бұрын
Hi Joe GREAT test/video. I definitely agree with you sir. Take care Buddy Hope u have a great week 🇬🇧🇺🇲🕊️✌🏼🤙🏼👍🏼
@kenr3787
2 жыл бұрын
How about yes cut the back vents out great idea I did that over a year ago and it stopped didn’t need to waste tape you’ll have to reapply every time you take it out. Love you exo but your 3 stooges moments are something else. 😂 ps I go through my body’s with hot glue and liquid electrical tape. The support points much like an interior cage that you can rip out if you ever need to this also helps with parachuting immensely.
@EJ-74
2 жыл бұрын
Very interesting 🤔🤨 lol Very cool seeing the differences with the tape etc 👍🏻
@EmptyPocketsRacing
6 ай бұрын
It also has a lot to do with throttling off the lip of the jump.( Like he said as well driver input)
@Xbrand845RC
2 жыл бұрын
Excellent content bro keep up the good work!!!🔥🔥🔥
@k20civic09
2 жыл бұрын
Grab those scorched rc inner fenders!
@ExocagedRC
2 жыл бұрын
They’re ordered
@texomarc
2 жыл бұрын
Cool stuff, Joe! I know I never really liked sending my sct just because it was so unpredictable. Love it on be ground, though.
@shaynestone541
2 жыл бұрын
Tires rubbing on the body was putting you nose down with the tape.What i do with my prostar sct(horrible at parachuting bc of lightweight)is i cut the whole rear out of the tailgate and i jump eighth scale triples at big races.
@chrisjohns4817
2 жыл бұрын
Drexel out the slats on the front fenders,it seems to let just enough air thru to kind of even it out.
@redndeyes
2 жыл бұрын
I've seen some folks cut vent holes,remove rear window etc.
@NCMOUNTAINSbackyardRC
2 жыл бұрын
Interesting for shore 👌
@4x5300
Жыл бұрын
He doesnt know what throttle control in the air is 😂😂 he just hucks it lmaooo
@V8chump
2 жыл бұрын
I wonder if holes right above the suspension would help? Since that seems to be the area catching most of the air
@rccrawlersmid-wales645
2 жыл бұрын
Love this kind of thing, great work. 👍
@rcchallenge8626
2 жыл бұрын
Get the wheel arch kit help displace that air out from under the body
@jay82bob
2 жыл бұрын
i found jumping my senton really tricky even after stopping the parachuting. i stuck a set of granite wheels on and they have more mass than the stock wheels making it way easier to control in the air.
@chrismetalwilson2588
2 жыл бұрын
I have some holes on the front fenders right behind the front wheels and the rear window basically cut out no parachuting
@KurtsRCs
2 жыл бұрын
haha you had me rolling all that tape on the bottom haha like a little kid
@crowtubecrozier2857
6 ай бұрын
I'm trying to prevent my truck from wheeling on a drag race. Front end goes up everytime, that's where I loose lol.
@ExocagedRC
6 ай бұрын
Throttle control
@mikehagquist5198
2 жыл бұрын
The wide big hood is like a parachute
@Moggmodels23
2 жыл бұрын
Brilliant video mate 👏👍
@andyfrancis5277
2 жыл бұрын
How about cutting slots in the body above the front tires?
@fozzy7199
2 жыл бұрын
I gave up trying to stop it with my slashes, i just but bajr speed buggy bodies on them :P
@konfyoused
2 жыл бұрын
Maybe try cutting out those fake vents on the hood.
@RuisRcAdventures
2 жыл бұрын
Personally i'd leave it as is, its not a bad thing to have a bit of parachuting effect to cushion those heavy landings... 🤪😂😂
@darrennixon1986
2 жыл бұрын
Surely dropping the front body posts would help it still seems to nose up even when driving. I think full inner fenders are available for the senton ye?
@ddrowdy7666
2 жыл бұрын
Figure out what size with the tape, then make a skid plate the right size to block the air.
@markperrella5546
2 жыл бұрын
that was very informative!
@grisslebear
2 жыл бұрын
Maybe cut out the molded hood louvers.
@ExocagedRC
2 жыл бұрын
The inner fenders should do what I need
@craigengelman4534
2 жыл бұрын
XRAY XT4 Off-Road Truggy Body with 1/8 buggy tires fix it all up
@OGRadGrow
2 жыл бұрын
Great video
@mikehagquist5198
2 жыл бұрын
Could cut vents in the hood
@kevinklein1806
2 жыл бұрын
got to vent the hood not the rear.
@Airbrushkid
2 жыл бұрын
It's you not the truck
@damondavis842
2 жыл бұрын
3 jumps most parachuting
@Bobbybbops
Жыл бұрын
What screws did you loctite?
@Kodijakk
2 жыл бұрын
I have ordered the Scorched Parts inner fenders / mudguards. Maybe ckeck them out...?! Edit: Should have waited till the end of the video. 😁
@nickwilliams6869
Жыл бұрын
Im having a problem with bottom out
@ExocagedRC
Жыл бұрын
its going to do that, just gotta slow it down
@old-rcplane-phart
2 жыл бұрын
Jconcepts made a body specially designed for sct. Made em parachute less🤷♂️
@old-rcplane-phart
2 жыл бұрын
It's 100x worse on 2wd. NO gyro effect from the added front drive. JConcepts had a great idea, BUT all sct parachute 🤷♂️. & if racing (professionally) most mains are 10 to 12 minutes. GOTTA be able to do battery swaps as fast as possible. The 4wd sct's don't seem to 'chute AS much.
@terrypepper7913
3 ай бұрын
Looks to me the driver is making either way . U want the back to touch first but not slam the front . Watch real drivers operate full size trucks with this suspension b set up .
@jefftolson6248
Жыл бұрын
i trimed any thing that looked like it might be a vent or air intake with a dremil tool and i can punch it and go full speed on my 3s with out balooning on the ground i can still power whelli but no air blaooning with all the slots cut out look at the proline precut body and it has the best air flow for the senton
@armandopace6113
2 жыл бұрын
Hi mate hahaha I've got a Traxxas slash and it is the worst it's like a parachute hahaha. I've ordered a HQ 727 pvc shell and hopefully it should slow a lot of the parachuting I'm having fingers crossed 🤣😁. Funny how you are doing this video when I'm having this problem.👂👍🦘🤣🤣🤣. I'm interested to see how your going to make iner guards?? 👍
Пікірлер: 70