Yes indeed! and thanks for asking, so I can let everyone know! Here is the link: How to Sharpen a Used Chisel: Flea Market & Garage Sale Finds: kzitem.info/news/bejne/qpqXyI6wr5Siqoo I also put a link in the video description, in case anyone else is interested in learning how to sharpen chisels.
@ef2b
5 жыл бұрын
I build furniture with hand tools- hand cut dovetails, mortise and tenon, housings, etc. This exercise is excellent! Here's a tip for getting things to the next level. After you do the pencil layout, use a knife to mark the lines that go across the grain. Ideally, you'll be using a square off of a reference edge and then move the knife along the square. Knives don't work well along the grain, where normally we'd use a gauge. So, what does this do? A sharp chisel will go right into that knife line and the line will guide the chisel. No guessing required. You end up with perfectly straight edges cut with to the precision of the thickness of a knife line. There are a couple things to know, though. Sneak up on the knife line when you are cutting. Take out the bulk of the material first until there's only 1/32 or 1/64" left, then put the chisel in the knife line and make the final cut. If you don't do this and put the chisel into the knife line right away, when you whack the chisel, it will crush the wood back into the knife line and spoil the work. When you clear the waste first, you give a place for the cut off material to go and avoid this. So, work up to the line, then make the final cut. You'll be amazed how much this improves the result, especially for shoulders and housings.
@charlescampbell8319
3 жыл бұрын
Look closer...the knife line you mention is there...a bit crooked... but there...
@Dejoblue
5 жыл бұрын
Why aren't you on PBS and or nationally syndicated? AAA great content as always :)
@OldBenOne
5 жыл бұрын
When you ARE syndicated, please stay true to 'Jane' and don't skip the hard (real learning) parts like every show ever or allow the producers to inject artificial 'drama' into your show.
@tedhaubrich
5 жыл бұрын
If St. Roy isn't going to be on the air any longer... It sounds like he won't be :( You wpuld make an excellent show for that slot.
@barbarasmith6414
5 жыл бұрын
I just wish I lived near Leah. I would be at her house with tool bag in hand. I love her channel
@sherierodrigues1569
4 жыл бұрын
Old Ben, I agree, and i live in Australia. More people need to see Leah and learn, I'm no.1 on the list. Sherie
@sherierodrigues1569
4 жыл бұрын
Oh Dejoblue, I think you have made a great statement. I live in Australia, so we may not have Leahs new show, yep, i said new show, it won't be long, I'm sure. She is fabulous. Sherie Rodrigues
@shabblabbat
5 жыл бұрын
I do not chisel or whittle, but I saw Leah and all I know is “I must watch!”
@seejanedrill
5 жыл бұрын
🙂
@bouser210
3 жыл бұрын
😄me too! I'm hooked
@909sickle
5 жыл бұрын
Gottshall sounds like something you say when you bring a pizza home. "Gottshall some pizza!"
@seejanedrill
5 жыл бұрын
909sickle That is very funny. Stop making me laugh 😁
@MultiMarty100
5 жыл бұрын
It's coming from a German name: Gottschalk! A funny person, sendet from God!
@virtuosooo
5 жыл бұрын
I was thinking it was going to be a joke of some kind. Like at the end of the video she'd say something to the tune of " . .. and if you believed Any of this, then i got ya'll" lol
@cathydenson1928
4 жыл бұрын
Yeah but many people's last names sound strange. That is the name of the inventor of this block.
@cathydenson1928
4 жыл бұрын
@@virtuosooo she didn't say that she said LOL if it helped any of you Sensei if you believe this you're funny LOL
@alexbezuska
5 жыл бұрын
I appreciate how you always explain things simply and have a very positive attitude. Thanks so much for your videos.
@caseyhoffmantheirishhoff7083
5 жыл бұрын
Thanks again Leah!!! Hope I spelled your name right!! My son and I watch your videos all of the time. He's in a Tech school and he's a sophomore and he's an honor student and he credits your videos for helping him and helping him think outside of the box!!!! He uses the info from your videos and puts it to use. They go on actual job sites as apprentices and work with builders and he's ahead of most of his class!! I'd like to thank you for your videos and the way they've helped my son. I'm a carpenter and he's been working with me since he was a toddler and I've taught him a lot. The experience plus your helpful videos have really helped him progress and be confident in his work!!! Thanks again and keep your great videos coming! ;-)
@youfan8446
5 жыл бұрын
Super envy your son actually.
@delvis7842
5 жыл бұрын
This was great Leah! Always appreciate your videos! Thanks for sharing with us!
@Faddidaddi
5 жыл бұрын
Welcome back, Leah.
@seejanedrill
5 жыл бұрын
Top 10 بالعربي thank you. I feel much better.
@Faddidaddi
5 жыл бұрын
@@seejanedrill Glad to hear that. Stay warm
@timcaron9049
5 жыл бұрын
Hi Leah, everyone should know about using a chisel. The only way to really learn about it is doing it and practise. In all honesty, chiseling is NOT my greatest skill but I get by after 45 years of wood working. Great video and have a great weekend. Tim
@seejanedrill
5 жыл бұрын
Thank you so much, Tim, and you are absolutely right. The only way to gain skills at chiseling is practice and more practice! By the way, I just noticed that we spelled "practise" "practice" differently...Is that a Canada/US thing, I wonder?
@timcaron9049
5 жыл бұрын
Hahaha, yes we have different words that are spelled differently. I was born and raised in Western Canada, so my first language is English. I learnt French later on in my life and moved to Quebec. I was always a terrible speller in English and now you add the French to that only makes it worse. When I write and make spelling mistakes in English, I blame the French and vice-versa. I call it Fren-glish. I think I started a new language. Now you know a little more about me and I hope that I gave you smile or chuckle to finish your day. Remember your Dad buying the French paper when we also have English news papers here too. Have a great weekend. Tim
@rrich8371
5 жыл бұрын
I think there is nothing like going back to basic hand tools for woodworkers. As you pointed out you can use the block for both honing your skills and reading wood. Great job and glad to see your feeling much better Ms. Leah.
@seejanedrill
5 жыл бұрын
thank you, I do feel better
@lindamarsden8024
5 жыл бұрын
Hi Lea, a set of Swedish wood chisels, given to me by my father for my 20th birthday, still have pride of place in my workshop. You are so right, we need to practice, practice, practice. Any musician will tell you this. It helps you develop muscle memory and control. I look forward to all your videos, A big thank you form the frozen north
@therealmfwic9503
5 жыл бұрын
Life is about learning and teaching. You often learn the most by teaching it! Thanks for sharing all your knowledge with us and keep up the good videos. I always watch them as soon as they pop up in my notifications. Yours is one of the rare channels I do that with.
@seejanedrill
5 жыл бұрын
🙂
@raymitchell9736
5 жыл бұрын
I look forward to watching your videos as I learn so much that as a hobbyist woodworker I can put into practice... Well, I've never heard of a Gottshall Block and I think this is a great for practice. I noticed that you covered the rabbet in detail and gave helpful tips about the cross-grain and slope of the grain but what about the other cuts on Gottshall Block? Particularly, I was hoping that your video continued to discuss the challenges of cutting the mortise in the center of the block... How to stop if from splitting -- Do you drill holes first then start chopping? Is it possible to cut a mortise without a drilling or is that a no-no? Again, as always, I learned something -- Thank you so much!
@seejanedrill
5 жыл бұрын
Hey Ray, You know what? We are planning a follow-up video which will cover in greater detail the process of chiseling different joints. As for your question, because the Gottshaw Block is an exercise to practice using hand tools, you would only use a chisel and mallet to cut the center mortise. (which is what I did). That said, when working on actual pieces, it is common practice to use a drill press as well.
@fortsawdust8323
4 жыл бұрын
I don't know where you live but damn I WISH you were my neighbor- I would BEG to be your apprentice! Thank you for making such great, easy for my PTSD-TBI rattled brain, to follow videos!
@clintprice2123
5 жыл бұрын
Great skills exercise video Leah, happy to see you’re feeling fine again and back to giving us informative content.
@dylanakent
5 жыл бұрын
I am smarter now than I was 5 minutes ago!
@bouser210
3 жыл бұрын
That makes two of us .I'm about to go get me a set of chisels.
@GabrielSimLaramee
5 жыл бұрын
Wow! this video is so awesome! I have one comment about grain direction. At 2:13 you said that people should consider grain direction, which is great. However, the grain facing the camera is not necessarily going down from the rabbet. This is because the facing side is cut perpendicular to a radius of the tree, not parallel. It is very subtle learning by feel what direction is "down," "up," "with," or "against" as far as grain is concerned. People new to hand tools should be thinking about what angle they are cutting the fibers. Exactly parallel? you might split rather than cut. Perpendicular, it is slow going and hard to peel. Almost parallel? you can be cutting uphill or downhill and there are different outcomes probable. If you pet a dog the wrong way you will make the fur choppy, but if you have to slice through a bundle of dog hairs, it's not as simple as saying, "cut downhill." We should all be aware that grain is something that we have to learn. Some wood species are more like sponges with little obvious grain, but many are very heavily grain directional like the wood in your video. Maybe we should just say, "heads up!" like you did. Keep up the great work!
@jonandlisa2000
5 жыл бұрын
Learning so much from you, thanks for sharing your knowledge
@kathydaffy5272
2 жыл бұрын
Hi Jane, LOVE your videos, they have helped me alot! Do you also have a video of how to make dovetail cuts? I am redoing an old dresser and not sure how to go about it.
@jackmeeker6194
5 жыл бұрын
Leah: It certainly is a pleasure to see a true professional use simple hand tools. I'm a "weekend DIYer around the house, and find your many tips and tricks incredibly valuable. In the episode about the Gottshall Block, you demonstrated really well how to properly use a chisel. I'm going to use your trick for controlling the depth of cut with my chisels. Thanks so much for all of your terrific tips.
@seejanedrill
5 жыл бұрын
my pleasure Jack
@hopefilledsinner3911
5 жыл бұрын
Ahh alas, to have the time to chisel or whittle 4 practice. An awsome teaching aid, keep the youngsters entertained for hours..
@seejanedrill
5 жыл бұрын
🙂
@bouser210
3 жыл бұрын
This is great , I'm just now getting into woodworking , plenty of carpenters in the family none around to pass on the skills needed , aside from my favorite brother in law
@Eulemunin
4 жыл бұрын
Gain is a boat building term. Often seem on the stems of a lapstrake boat. Great way to make a strake fit smoothly into the stem. I have mostly used them when they are complexly angled in that fashion. Great basic skill project.
@floydalbright1214
5 жыл бұрын
Leah good video, notice your chisel are very sharp . Con you do a class on the best way to sharpen a chisel ?
@seejanedrill
5 жыл бұрын
here goes kzitem.info/news/bejne/qpqXyI6wr5Siqoo
@andrewmuss3245
4 жыл бұрын
Leah, I love you. You are so down to earth and explain everything in simple understandable language. Your videos are absolutely great. Thank you so much
@alaskankare
5 жыл бұрын
it would be greatly appreciated if you did a longer video going over working on each part and explaining why this cut is being done in the block and tips and tricks to help make that particular cut or chiseling.
@th2k864
5 жыл бұрын
I second that but I know doing that video would require a large time commitment
@tracierendell4422
5 жыл бұрын
Wow. You are awesome Leah. I know nothing about woodwork. I missed out in high school as I was in a wheelchair at the time. I'd love to learn and my husband pointed me in your direction. So this is my first woodworking tutorial. Thanks for really covering the basics. Tracie
@seejanedrill
5 жыл бұрын
you're welcome, Tracie, and welcome to our channel!
@hoperules8874
5 жыл бұрын
Leah-You Rock! Thanks So Much!!
@juanrivas2888
5 жыл бұрын
Awesome. Greetings Leah.. :)
@mfcosi
5 жыл бұрын
Thanks a lot Lea! TV news watching will never be the same.
@SantisValiant
5 жыл бұрын
Leah, you are the best video host ever. So knowledgeable and sincere, it's always a treat watching your videos!
@ibidesign
5 жыл бұрын
Leah should narrate pretty much everything. Everywhere. Every subject.
@jamiepatterson558
5 жыл бұрын
Johnny Shabazz, Agreed!
@ernestboatwright7172
5 жыл бұрын
Never herd of it but look good for teaching hand Chelsea
@PietroMaker
5 жыл бұрын
This is very cool and utility for new woodworkers 😊
@FarmFreshIB
2 жыл бұрын
I am preparing to cut down an old drawer front to use in a smaller space. This rabbit demonstration was very helpful. I think a Gotshel block is in my future!
@mixpick138
4 жыл бұрын
Cheers to the loveliest lady on KZitem! I may already know much of what you are discussing, but I learn something new every time! Thanks!!
@rawbacon
5 жыл бұрын
Chiseling is like writing, things I only do a couple times a year.....So yes my handwriting & chiseling suck by professional standards (not actually that bad)......But not worth putting the time into to become great at either.
@benbarker8154
5 жыл бұрын
As a side note: When I start ACTUALLY practicing how to woodwork, what do recommend I have in my first aid kit? :)
@shurdoo
5 жыл бұрын
Me too.. I'm saving to buy wood and tools to build my own kitchen cabinets. I know I can do it because Leah says so. ; ) Leah, would you make a video that could show me the steps I need? or maybe help me find the ones you have already made that I can put together. I already have a collection of several saved in a favorite folder. Thanks.
@DamasKriss
5 жыл бұрын
@@shurdoo if only people had such confidence in Jesus, ha.
@seejanedrill
5 жыл бұрын
building cabinets?
@shurdoo
5 жыл бұрын
@@seejanedrill Yes please. I saw the one about buying them. And doing the laminate but it would really help to see the steps.. what to think about while doing them, mistakes to avoid etc. If you have time... ?
@TRICK-OR-TREAT236
5 жыл бұрын
GOT CHA ALL BLOCK !
@padoco73
5 жыл бұрын
Glad you're feeling better, Leah! As I always say, if you practice doing things the wrong way, you get very good at doing them badly. For that reason, I really hope you can make a follow up on this where you could demonstrate some of the trickier cuts. Please?
@seejanedrill
5 жыл бұрын
Thanks Patrick, I feel a lot better but I am still on the mend. Perhaps I could do a video on chiseling technique.
@kandakumar4376
5 жыл бұрын
@@seejanedrill good information
@junskey
5 жыл бұрын
seejanedrill yes plz
@Mega747400
5 жыл бұрын
i don't do home improvement nor do i use any carpentry skills but from your videos i feel like i could go build a house lol have you considered doing any videos on electrical work maybe just for running conduit or safe work that can be performed for a non electrical engineer or the need of an electrician
@kathyb3619
5 жыл бұрын
I’d never heard of this block, but it looks like a fun way to practice my chisel skills! Thanks as always, Leah!
@randywilliams847
3 жыл бұрын
The Amazing Leah... you remind me of a show on PBS in the 1950’s... Watch Mr. Wizard.
@charlescampbell8319
3 жыл бұрын
You didn't mention the pre-cut line I see you my have done with a knife...maybe show/mention that next time...I run mine using a straight edge keeping the blade perpendicular to the wood face...3-4 passes...then I do a back cut 1/16"-1/8" creating a "V" with one vertical leg...helps create a real true edge for hinges/lock sets or the like...
@vicstee482
5 жыл бұрын
Hi Leah, i have been watching your channel for several weeks now and think it’s great! I do find a few bits confusing, as im from the uk, so we use different terms for some things. I love your carpentry the most. You have inspired me to sign up to a 5 days beginners course! I cant wait! As i am helping to renovate my dads 17th century farmhouse! One question though. Why is your channel called see jane drill?!
@mrscottanderson1
4 жыл бұрын
My favorite woodworking channel on KZitem, you are amazing!!
@hagstruan1140
5 жыл бұрын
I read the title of the video and immediately thought, "You suck at chiseling, yeah you totally suck." Apparently channel You Suck at Cooking has a nice firm hold on my brain.
@elained2448
5 жыл бұрын
Ms. Leah, I forgot about this, thanks for the reminder...I think I’ll give myself an afternoon off and give it a go. This came at the perfect time, got the carport finished with all the little jobs waiting and now comes the vanity and then the molding. I’m supposed to be done before Christmas (I think she means this Christmas) Then I’ll hit Wearing’s book for more time off exercises:). The one thing I truly remember well is the importance of having the work at a proper height for chiseling. I’ve built a box to stand on, but a class I took several years ago had me outside at the long wooden bench sitting and paring.
@geocarey
5 жыл бұрын
Thanks Leah. Brings back nightmares of my woodwork teacher back in 1960. We had to do a similar thing on a block of wood. Trouble is, if we went a bit wrong he would get furiously angry - even threw blocks across the room! However, it did not put me off DIY, I still do all my home improvements myself.
@JohnLeePettimoreIII
5 жыл бұрын
Maybe he should have tried decaf. 😃
@seejanedrill
5 жыл бұрын
geocarey Wow! I don't know what to say about a teacher who would act that way.
@geocarey
5 жыл бұрын
@@seejanedrill I became a teacher myself - Physics. I didn't throw stuff :-)
@littlefootinalaska6253
5 жыл бұрын
@@geocarey lol
@markgigiel2722
5 жыл бұрын
But, isn't that how you demonstrate force and momentum?
@Parmesana
5 жыл бұрын
thanks for showing HOW one uses the chisel.. I was never sure which side went where
@coalsauce4457
5 жыл бұрын
You are such a wholesome person Love your videos
@seejanedrill
5 жыл бұрын
🙂
@markharris5771
5 жыл бұрын
Hi Leah, I noticed that you had two bevels on your chisel. Please may I ask if you have a double bevel on all your chisels and at what angles do you have them please? Thank you for this video, for a total newbie like myself it’s incredibly useful.
@brianblanch3647
4 жыл бұрын
The Gasho block now is it just for Homing Inn on your chiseling skills or can it be also used for every day carpentry templates?
@jeffoldham3466
2 жыл бұрын
leah i love your videos,,,and honey you have got to be the best at explaining how things work,,,,,if you were my school teacher when i was in school i would be a much smarter person,,,,god bless you honey and keep them videos coming
@w6263
5 жыл бұрын
brilliant! Never heard of this block before now! Will definitely give it a go!
@MrMulligan84
4 жыл бұрын
This is great information. I am just getting into woodworking, I've always had an interest but never the space or money to get started. I have worked on a few projects one of which was a shaker-style step stool. I was chiseling out the area for the stretchers doing sort of a stop dado but each time I ended up with something more like a dovetail where the bottom of the joint widened out. What am I doing wrong?
@michaeljohnson2371
5 жыл бұрын
If you ever change a bathroom vanity or bathroom fan please record and share with us lol you simplify things and make it easy to learn. Thanks Leah!
@nml4546
5 жыл бұрын
Great video as always but you forgot to mention that the chisel(s) must be sharp (super sharp) would be better thus leading into your video of how to sharpen chisels (or a referral to someone else's video on that subject).
@none5355melvinMadigan
5 жыл бұрын
I never herd of the gottshall block i will make one it will be my next project thank you i love your Video's ther very Educational
@mark2talk2u
5 жыл бұрын
Excellent video and presentation !!! Thank you.
@timcaron9049
5 жыл бұрын
Hi Leah. It has been a long time since you have put out a video? I hope that everything is alright. Take care and be safe.
@tomnekuda3818
3 жыл бұрын
The "Secret" is actually "Control" and "Sharp Tools".
@philliplarson2155
3 жыл бұрын
Also by flipping chisel over and using it that way helps prevent chisel from digging into the wood.
@DaisyHollowBooks
5 жыл бұрын
I’d never heard of this! Very interesting, and I’m enjoying and learning from your channel!
@browntg1644
5 жыл бұрын
Hi Leah love your channel i have a question can you please do one video for helping me with finding studs in the wall the best way to do it please and thank you so much
@billrichardson6620
5 жыл бұрын
browntg16 I think she may have actually posted something before relating to this but I’m not sure!
@seejanedrill
5 жыл бұрын
browntg16, Here are two videos seejanedrill did on locating the stud: kzitem.info/news/bejne/q5xu4H6Zf31lfqA kzitem.info/news/bejne/lKeKs6Z3rGNkfoI
@68blues
5 жыл бұрын
I have a question. After chiseling, what is the best way to remove the bloodstains from the wood?
@bigmule35
3 жыл бұрын
Great videos . We home school our kids and this channel will be required content for my Son.
@edgarperez5587
5 жыл бұрын
i honestly don't have the patience to do something like this, but i always enjoy watching your videos.
@michaelr.9363
4 жыл бұрын
Good way to learn chiseling, i always hatetd that coz i never had a good result. but i´ll try out. Thanks for that
@rhansen1969
3 жыл бұрын
Leah, I love watching your videoes! They are addictive.❤
@1habicher
5 жыл бұрын
I would buy the block with instructions and then make my own as well. Very well done Video. I am only a DYO and old enough to be not so handy.
@nanibahra5487
2 жыл бұрын
Hi Leah. Love your channel. I know this is an old vid but can you tell me where you got your wood hammer. It looks so pretty
@twdodd439
4 жыл бұрын
i was always taught to par with the chisel turned over so the bevel is down. the way your holding, if it bites in to aggressive the bevel keeps wanting wedging you in and you have no way to lift the tip. turned over you can leverage against the trailing edge of a bevel and pick the edge up.
@darkJohnSmith
3 жыл бұрын
4:40 notice she didn't finish the cut. That's because she stopped before the end and finished the cut from the other end to prevent the end grain from splitting at the end of the cut.
@MikeTheMaker1
5 жыл бұрын
Gonna have to make my own now. Time for some practice.
@darryltoombs1076
5 жыл бұрын
I only have one question.....why do people refer to one particular woodworking joint as a Rabbet? The correct name for this is not Rabbet but Rebate. Just a small gripe but it really irritates me when I hear Rebates referred to as Rabbets.
@seejanedrill
5 жыл бұрын
Darryl Toombs Are you in the UK?
@darryltoombs1076
5 жыл бұрын
@@seejanedrill No, I'm in the Netherlands...I'm actually Australian with British nationality as well and live in The Netherlands now. I have also lived in the US. My gripe is only a small one but for me it is like fingernails on a blackboard.....Rebate...Rebate...Rebate ;-)
@jorrba3934
5 жыл бұрын
Rabbet, or Rebate, both words are correct. Thanks leah.
@pferoxtheskeeterguy
5 жыл бұрын
That's cool, never heard of that before.
@BeeBait
3 жыл бұрын
Oh Lord, I blew on the screen to clear the surface of the rabbit...
@blkjakk
5 жыл бұрын
You got mad chisel skills fo sho
@2862Gunny
5 жыл бұрын
You really have to wonder who gave this video a thumbs down.
@raulgamez5602
5 жыл бұрын
Why do I keep blowing air at the screen
@markyour6998
5 жыл бұрын
hi like your vids. would have liked to see you the entire block.
@michaelchitwood5566
3 жыл бұрын
Excellent Video thankyou.
@SureIamLucky
5 жыл бұрын
Just Awesome. Thank You
@seejanedrill
5 жыл бұрын
You're very welcome!
@RobertSmith-me3gs
4 жыл бұрын
Thank you for existing.
@doct0rnic
4 жыл бұрын
A+ I've watched a lot of wood working videos including Paul Sellers and they have never talked about this block method before, thanks for the upload!
@seejanedrill
4 жыл бұрын
My pleasure Ben
@kandakumar4376
5 жыл бұрын
Good information Lea as always
@seejanedrill
5 жыл бұрын
🙂
@timemachineeddie1146
4 жыл бұрын
Awesome. Thanks for sharing.
@digitalbroadcaster
5 жыл бұрын
Hmmmm? Well, I logged in to KZitem to search for something that I know I needed to look at. Then I saw a thumbnail about carpenters pencils, followed by others from seejanedrill, and now ending up on this one. So...now I've.....kind of...forgotten >why< I came to KZitem in the first place tonight. But at lest I now know what a Gottshall block is. (:0D)
@piworower
5 жыл бұрын
I started on the pencil vid too :P
@pmvoice88
3 жыл бұрын
Great video Leah! Thanks.
@markgigiel2722
5 жыл бұрын
First thing is, have a quality SHARP chisel. Otherwise, don't even try this. Maybe you should do a video on chisel sharpening if you already haven't.
@seejanedrill
5 жыл бұрын
I agree with you 100% regarding a sharp chisel. And here's the link to the sharpening video for anyone interested. kzitem.info/news/bejne/qpqXyI6wr5Siqoo
@notsohandytim5090
5 жыл бұрын
Your tool storage wall behind you looks ALMOST as bad as mine. Now I don't feel quite so bad. "Gottshall"!
@seejanedrill
5 жыл бұрын
thanks for the humor
@sparkfishes
5 жыл бұрын
Love you stuff but why call it a rebate a rabbit ? If you use a rebate plane to make why is the finished item a rabbit ? It is a RE-Bate
@seejanedrill
5 жыл бұрын
Either or
@SoleEpiphany
4 жыл бұрын
I thought it was a jig not a practice piece ha ha
@snowman8235
5 жыл бұрын
Glad to see you feeling better.
@bumbaclot813
3 жыл бұрын
Im already mad and crazy.... jk lol
@davedeatherage4902
5 жыл бұрын
Hi Leah😊. I'm glad you're feeling so much better, I did pray for you. Thanks for telling us the tools you were using today and describing the purpose and use for the Gottshall block👍✌😌
Пікірлер: 268