Even without the load and go. For those who just can't afford it.. you can lift the deck very easy with a chain and still use those awesome Mudd's custom brackets
@PhilHilton
2 жыл бұрын
Indeed. I wish folks would stop pushing Load and Gos as if they're required. I keep hearing the word "need" in places I shouldn't.
@mooman86
2 жыл бұрын
You can even just lift the backside up on the ground, get the brackets in, and then lift the deck up on to its wheels…More physical labor but possible.
@monz78
2 жыл бұрын
Allot of people do need them. Speaking for myself once I took my deck off it was to heavy for me to just muscle it around. With the load and go it made it easy to pick it up and move it to the back of the barn
@PhilHilton
2 жыл бұрын
No one saying they aren't heavy. We're saying there are other ways to move them around with the bucket that doesn't require expensive load and gos. Straps are cheap. All it requires is an extra trip off the tractor to hook them on.
@TractorTimewithTim
2 жыл бұрын
Once you try the load n go, your opinion will change.
@russorpcom
2 жыл бұрын
I like these product videos, I believe you give honest facts, explanations and reviews, as well as videoing of the product for all us to see. Thank you for these types of posts.
@TractorTimewithTim
2 жыл бұрын
Thanks for the feedback.
@joeehenger6156
2 жыл бұрын
65 years old and I pick my 60” JD mower deck up and hang it on the wall. Just proves using your muscles isn’t a bad thing.
@bradmeacham6982
2 жыл бұрын
A suggestion for those of with "CRS" (aka Can't Remember Stuff 😉) syndrome... If you replace the venting plug with a non-venting plug for storage, be sure to tag the plug in some way so that when you go to use the mower deck in the spring, you won't forget to swap the venting plug back in. Even just covering the plug with some masking or duck tape with a "REPLACE" note written on it should work.
@ilmo2313
2 жыл бұрын
Just finished chopping up leaves this week, glad it is over. Loader, bucket, and back blade on for the rest of the winter.
@craigthoricht2214
2 жыл бұрын
I have a 2016 1025R with a 54 inch deck. Deere doesn’t make a Load and Go for that deck. I made up my own brackets to pick up the deck with the loader. Absolutely a useful way to work with that 200 pound mower deck.
@tcmits3699
2 жыл бұрын
With deck in vertical position take vent plug out install male/ female 90° elbow pointing straight up reinstall vent, should now raise vent sufficiently
@coffeebert6644
2 жыл бұрын
I bought the load and go after seeing it on your KZitem channel , I do not regret it at all, it makes moving and maintenance on the mower deck so easy. May have to look into the mower deck stand now 👍🏻
@TractorTimewithTim
2 жыл бұрын
Perfect combination! Load n go and deck stand!
@toddmitchell2125
2 жыл бұрын
Would the Deck Dolly serve both functions. Can the deck be stored in the Deck Dolly?
@TractorTimewithTim
2 жыл бұрын
Yes, deck can be stored on the deck dolly. That is its intention. It does serve both purposes, but it is a bit difficult to pick up.
@toddmitchell2125
2 жыл бұрын
Thanks Tim! I really enjoy your videos... I have a 2013 JD 2320 with many attachments and I don't think I could do life without it!
@alittleofthisandalittleofthat
2 жыл бұрын
I use straps to lift my deck. I think they are axle straps 24” long. And a couple shackles. There is two holes in the front middle of the deck and I have two chain hooks on the top of my bucket. Works great for changing blades and cleaning. Like the stands with casters. 👍
@fatbastard1229
Жыл бұрын
Thanks so much for all your videos. I have a 2018 1023e and recently decided to get a mower deck. Thankfully, my dealer had one new old stock that would fit. I opted out of the trailer when we initially purchased it because I just use the tractor for personal use and didn’t want the expense or space of a trailer. I do all my maintenance thanks to your videos. They will pick up my tractor next week for the install of the deck. Then I’ll order the load and go and the dolly system based upon your input. Our horse barn floors are not paved - just rubber mats. The dolly seems to be the way to go for our terrain. I’m a strong sixty year old guy who is not getting any younger. All these systems will be a huge help. We’ll still use our Husqvarna mower to cut in, but the Deere will do the rest. I hope your cat is doing okay.
@fatbastard1229
Жыл бұрын
May the Lord bless and keep you!
@philsmock4943
2 жыл бұрын
I have a zero turn JD mower, so I don't have a mid-mount mower for my 1025R. But this was interesting to watch what is out there for people who do. It's always good to have option. Thanks for sharing Tim.
@martineastburn3679
Жыл бұрын
I used my Mower deck when I was brush hogging dragging a tail cutter :-i) and when I turned it cut a path not leave so much grass not cut due to the off center turn of the brush cutter. So mowing with both can have great results. I back into tough spots and drive forward through grass letting both cut being easier on both.
@charlesmach7511
2 жыл бұрын
One thing I always do when I store my deck is unhook the spring for the deck belt tension. I use a zip tie to hold the spring so it doesn't get lost while loose.
@TractorTimewithTim
2 жыл бұрын
Good idea!
@jj-eo7bj
2 жыл бұрын
Be undoing mine today John Deere 318
@andrewanderson1436
2 жыл бұрын
Those are nice options to have. I don't own a deer but hands down they have the best mowing setup of all brands.
@edprush
2 жыл бұрын
I've used the Deck Dolly, Mudd Customs, and DeckAxles for deck stands for my JD 60D, 62C, and 54HC. The DD didn't really save me much space because it is about the size of a hand cart. I'd have to say that DeckAxles has the upper hand because of the lower cost and larger wheels. I have to roll my decks over a floor mat and the Mud Customs can't get over the lip of the mat. I don't have a load n' go so I have to lift the decks by hand.
@Diantane22
2 жыл бұрын
Love this solution. Was getting the Load-N-Go anyway. Using those stands you showed I can easily move the mower deck to a place I have on the side of the garage. Thank you!
@chrisswartzwelder8494
Жыл бұрын
I go ahead and pull off the gearbox when I store mine that way I don’t have any issues with leakage of the gear oil.
@bhall7997
2 жыл бұрын
Storage wise my orange deck spends the winter in the shed. Fits under the back blade perfect doesn't take up any extra room. Moving wise I'm stuck using forks. That JD stow and Go sure looks like the " cats meow" :)
@jean-philippegagnon9189
2 жыл бұрын
Legends say that everytime you say ttwt, a green tractor is born. Don't stop saying it. Nice video, good day to you both!
@TractorTimewithTim
2 жыл бұрын
Hmm. You’ve been watching Christmas movies!
@willie0001
2 жыл бұрын
I use a wheelchair for mobility so once I'm in my 1025r I don't get out until done. With load&go I can attach mower and remove from drivers seat. I mow about 1.5 acres of my property without issues. I just needed to make a handle to pull up on the release lever that can be reached from the cab.
@JMSynthetics
2 жыл бұрын
Yup I bought the mudd customs style before it was their product, bought them raw and painted JD Yellow. My load and go needs to be grinded on the right hand side but havent gotten around to it.
@Louj1970
2 жыл бұрын
Just ordered the Deck Dolly, I hope it works as easy as you show, it will save my back some pain, provide safe and tight storage and make working on it a breeze, I hope anyway!
@kevinallen8072
2 жыл бұрын
Tim, load and goes are awesome. I had watched your early video about them. So when I bought my 1023E I had the dealer order and put them on. The dealership had never seen them and was very impressed. They even painted them jd green to match tractor. Great video will have to check out the storage options. God Bless, keep videos coming.
@TractorTimewithTim
2 жыл бұрын
Mudd’s deck stands are the perfect complement to the load n go.
@GrampysTractor
2 жыл бұрын
Great information Tim. I need a stand to hold my deck in the vertical position because that's how I store it.
@TractorTimewithTim
2 жыл бұрын
Yep, you need load n go, and Mudd's jd deck stands! You would be amazed. roll it back into the corner of your shop for the winter and forget it!
@Kcolby47
2 жыл бұрын
Great storage ideas for mowers. Also, you brought up some considerations when looking at a belly mower vs. rear or separate mower. Blessings.
@SledgeHammer43
2 жыл бұрын
During your winter maintenance of your mower decks you should add priming and painting the underside of the decks.
@MIoffGridAdventures
7 ай бұрын
Great tip. I had no idea this kind of thing existed. Just ordered one.
@donaldkollar8138
2 жыл бұрын
I purchased the Mudd deckstand and it is great. I am getting to old to try lifting the deck with the other equipment. It also comes with a storage plug for the oil case.
@josephsierra7295
2 жыл бұрын
Hey Tim.. I've had the Deck Dolly for my 54D for a few years now. Been very pleased with the storage solution. It would be nice to have the Load n Go too to move the deck around easier. But with a 2014 1025R and 54D MMM deck, I understand the Load n Go does not apply (unless something has changed). Great video. Thanks for sharing!.
@TractorTimewithTim
2 жыл бұрын
Nothing has changed. No load n go for older 54d’s.
@monz78
2 жыл бұрын
I ordered these back when they where back order. Just got a shipping notification today that they shipped.
@TractorTimewithTim
2 жыл бұрын
WooHoo!
@travelingtracer
2 жыл бұрын
I’ve got the deck dolly. I’m 68. An old back injury is starting to bother me again. The lift from carry to storage position is the hardest. I wish I had opted for the longer handles and dual wheels but otherwise it has served me well for the past three years. I will be upgrading to the load n goes and those new castors to save my back…
@TractorTimewithTim
2 жыл бұрын
Yes. Good idea. That last push up to storage position is not good for us older guys.
@curtwhite876
2 жыл бұрын
Those are some super slick and simple storage solutions! I am getting my "BIG MOUTH" grapple on Tuesday. I'm so excited, it's going to be like Christmas in... December... Perhaps it is time to consider a new name for Martha. For some reason, I think Bob might be a good choice. Poor little kitty.
@TractorTimewithTim
2 жыл бұрын
Yep. Bob may be more appropriate!
@gh0st-6
2 жыл бұрын
Still no Load-N-Go for the 60D on a 2038R it seems. Too bad because I would buy it in an instant!
@tomkeating65
2 жыл бұрын
I enjoy all the videos you put out. You always have something interesting to share. It's the Tim and Kristy show. Not necessarily in that order. 😁😁😁
@jj-eo7bj
2 жыл бұрын
Like the deck stand set up for a 318 mower deck ,light enough couple people could flip it up or have locks on the rear wheels a guy could fabricate that himself if not available for that deck , or price is outrageous
@photocontrol
2 жыл бұрын
Those both look like great options to store and maintain the mower decks.
@SteveHerrick-yi4md
9 ай бұрын
These look like a decent cab, the price seems fair. wondering what the height is for my 2025 to fit in the garage. being in Maine, the heater would be a requirement. This video, was very helpfull, thanks
@terrysurface8663
2 жыл бұрын
your mowers are mighty clean Cheers!
@graemetracybradshaw9871
2 жыл бұрын
cant get these in Australia so might have to make one Great idea..Thanks Tim
@chrishunt5291
2 жыл бұрын
I started looking at this for my 1723e. I found a few ideas for diy online.
@BobsOutdoorActivities
2 жыл бұрын
Both those options are pretty ingenious. Sorry to hear about Martha.
@jpl8290
2 жыл бұрын
Thanks Tim, very informative and helpful video. Merry Christmas to you and your family!
@tinachambers4887
2 жыл бұрын
Very useful products have a day love from TEXAS
@joshtischler6461
2 жыл бұрын
I've got a 2020 1025R with the 60D and bought the deck dolly because of this video. I'm happy with the purchase but I will say that there are significant differences between the deck dolly you showed and mine for the 2020 model. And in general the changes make for much less ease of use.
@TractorTimewithTim
2 жыл бұрын
Interesting. I do not have the 2020 model. I assumed it would be slightly different, but essentially the same function. Thanks for the feedback.
@PastorDavidFranklin
2 жыл бұрын
Great idea! Save time and one's back.
@jeffwhite2107
2 жыл бұрын
I had to grind on my load and go to I got some ordered with the forecaster wheels. And I use your coupon code thanks Tim
@jGoodloejr
2 жыл бұрын
Merry Christmas!
@lazerbeam3928
2 жыл бұрын
Tim, not to change the subject but yesterday I was watching a new KFC commercial and in the back of customer crowed was a gentleman that was taller than all the rest peering over their shoulders. I kept thinking, "gosh that guy is very familiar". Then dawned on me, Its TIM! It was either your twin brother or you were out looking for cheeseburgers and got caught-up in a KFC commercial. I have since viewed the commercial two more times and I swear it is you in the back of the crowd.
@TractorTimewithTim
2 жыл бұрын
Ha!
@jeffw7644
2 жыл бұрын
No broken key!!!!!! Yaaaaaaa! Ordered!,,,,,,,,
@MustangsTrainsMowers
2 жыл бұрын
A Toro 5xi garden tractor 60” deck is 320 pounds. 52” is probably 200 to 250. Decks on JD 1 and 2 series could be 400 pounds or more. I have 7 various Toro 52” decks and when I store them I tip them up with the discharge side to the floor. I can L, R, L, R etc side to side tip walk it short distances, otherwise I try to move it with a 2 wheel dolly. It would be easier if I had some special crane just for moving decks.
@paulankrett2928
Жыл бұрын
Tim, can't see the 54" deck stands for the Mudd Custom Website. Are they still offered? Great channel! love the videos!
@BG-vq9fd
2 жыл бұрын
Thru email exchanges with Mudds, they have concluded their wheels will work with my 60HC deck from my X738. I took measurements and sent pictures. Not having load n go, I sling the deck before I back the tractor off. Then pick it up with pallet forks on another machine. Several steps but no hard labor and I do not have to get on the floor. I have considered the other system many times but it gets pricey when you add the double wheels and extra length handles. I wondered what the second set of pins were for on the Mudds brackets. Now I know. I am also considering brackets from Green Parts store for my 54 inch snow blower.
@DougAlesUSA
2 жыл бұрын
Please tell me more about the snow blower brackets. I’m not familiar with them and Google is not helpful so far.
@BG-vq9fd
2 жыл бұрын
@@DougAlesUSA John Deere Snow Blower Storage Dollies - LP70692 I had trouble finding them again. Green Part Store lists them. I currently use furniture carts but that has its problems.
@dave.lawrence.3894
2 жыл бұрын
EXCELLENT video, two great products....
@Katya5cat
2 жыл бұрын
Gee I would love to be able to use something like that for my deck. I have a Befco 3pt finish mower. It's pretty heavy at 600 lbs. It takes quite a big chunk of the available space in my shed. Sorry to hear about Martha. We have a really nice cat that ran out as the door was being closed. She had to have part of her tail removed. She doesn't know her nickname is Stubba Wubba now. She's a great pet and mouser too.
@JCWren
2 жыл бұрын
at 6:59, I wonder why they didn't put a hole on the wheel storage tube where you lock it in place with the pin. Seems like a freebie, and can prevent the wheel from falling out if you tip the deck past horizontal.
@monz78
2 жыл бұрын
There is a hole in it. You use the lock that locks in the wheel
@JCWren
2 жыл бұрын
Doesn't appear to be one in the dolly Tim has, and if there were, why wouldn't he be using it?
@bradolsen8629
2 жыл бұрын
May the Lord bless you and your family Tim happy holidays merry Christmas
@pc5569
2 жыл бұрын
Great ideas Tim.
@tomonentrepreneurship
Жыл бұрын
If you're thinking about buying the 1025R with the 60D mower deck, note that the deck does not have the same warranty and only has one year- so one mowing season. John Deere does not stand behind their own workmanship issues and will not warranty the deck, even when it's proven to be factory flaws, and deck can get expensive to fix. Mine failed at under 70 hours.
@johngianopoulos6668
2 жыл бұрын
Still not available for 2032r/2038r with the 60d - just wonder why. Have already seen after market loading type brackets which I may look into. I purchased a deck dolly for a 54d deck and found it to be unusable for me. Poor mechanical advantage and the way it's designed seems to be for a taller person than me (I am 5'6"). Hasn't seen any use in years. Have my Tony stands on order. Good video Tim! Thanks.
@PurpleCollarLife
2 жыл бұрын
Thanks, Tim! I do like those deck stands. I wondered if they made them for my 60C Edge mower that goes on my 2210. Unfortunately, I can't tell from their website info. AND - they're on back order. It does look like a great product - well worth the money for the convenience. - Chad
@TractorTimewithTim
2 жыл бұрын
They are shipping soon. He has the materials, just needs to weld them up.
@mattnicol8882
2 жыл бұрын
Another great video! This is exactly the type of info I'm looking for. Ufortunately, looks like Mudds Customer does not offer stand for my MMM (72D). I'm definitely getting the load-n-go in the near future though!
@TractorTimewithTim
2 жыл бұрын
Yes. I have them for 72d
@mattnicol8882
2 жыл бұрын
@@TractorTimewithTim Mudds Customs website doesn't show an offering for these for the 72D deck. Are you saying you have a different product available?
@cobiski
7 ай бұрын
Just bought a new 2024 1025R with a 60D deck and Load-n-go. They still have a problem with the tolerances between the Load-n-Go hook and pin, right side is too short on mine. I'll probably pull it and take it in to see if I can get one that fits.
@TractorTimewithTim
7 ай бұрын
Nah, just take an angle grinder to it. 30 seconds will fix it. You would scuff that paint anyway.
@jeffmayerl7149
2 жыл бұрын
You really sucked me in with this video……new isotunes and deck brackets will be under my tree this year….dam you Tim!😂
@KruppFarms
2 жыл бұрын
Those decks look way to clean to have much use on them! Mine has paint rubbed off the top from belt vibration from day 1! Got 2 mowing season on it now and belt still seems fine, something I should be checking?
@TractorTimewithTim
2 жыл бұрын
One deck has 2-3 hours on it (leaf cleanup from last episode). The other one has never seen action.
@tgilldesign
2 жыл бұрын
Serious flaw on MUDD's deck storage solution: Crazy Wheels are too small diameter. Personally, I clean my deck 'OUTSIDE'.... and then install my vertical storage shafts and LARGE wheels from another prior Green Tractor Talk Sponsor/Merchant. I forget the name.... but their wheels are huge and they roll through grass and into my cement floor garage very easily...... Try rolling the MUDD'S deck wheels through your lawn..... good luck with that one. :-)
@user-hs5fp1dg5u
3 ай бұрын
I have the mower deck yhat is on the right side of the video. How do you adjust the front lift bracket on this style mower?
@jonnylowkon
2 жыл бұрын
Man I hope one of these stands will work for my 72” deck
@TractorTimewithTim
2 жыл бұрын
Yep. I’m using Tony’s originals on my 72” right now. Mudd’s will work beautifully! They are incredible!
@marlondeere3039R
2 жыл бұрын
Always put pins in on load and go. 72 deck is extremely heavy.
@charleslynch908
2 жыл бұрын
I really wish they made those brackets for 54d by mudds. Would buy immediately
@TractorTimewithTim
2 жыл бұрын
Email him. I think he has deck stands for 54d
@charleslynch908
2 жыл бұрын
Doing it now
@ScottHammet
2 жыл бұрын
Wish there was a Load N Go solution for Kubota decks.
@TractorTimewithTim
2 жыл бұрын
…oh my, that is a hanging curve ball comment… :-). I’ll just avoid swinging :-)
@rt3box6tx74
2 жыл бұрын
Hum, looks like a modified set of dollies adapted to hold the deck. I've started lifting my tractor w/ mower attached when I need to access the underside of the deck.
@chuckstimson9029
2 жыл бұрын
The Load-n-go's are not compatible with the 60D for the 3R series or a 72" with a deck with the cab. I have a 3046R with the 60D deck and cab so I'm leaning towards the deck dolly.
@brianhillis3701
2 жыл бұрын
It is a shame that this (easy manipulation and storage) is not incorporated into all implements. I remember both of my grandparents stored everything outdoors, I could not tell which were functional and which were lawn ornaments. Often we were surprised when some of them got used because they were hard to get to with the tractor.
@jakebernstein2526
2 жыл бұрын
I have a JD 2720 with the 62D MMM. Are there any load-n-go / storage solutions for that deck?
@RB-jc2jx
2 жыл бұрын
Really could use load n go for 2038r with 60d deck
@lonnyjohnson8732
Жыл бұрын
How do you check and fill the mower deck oil?
@Suburban-Homestead
2 жыл бұрын
Tim, how are your decks so clean?? Do you use them at all? 😁
@TractorTimewithTim
2 жыл бұрын
Both new
@Suburban-Homestead
2 жыл бұрын
Cheater! 😀
@SSouthcombe
2 жыл бұрын
John Deere does not make Load 'N Go attachments for the 60D deck on the 2032R or 2038R tractors. I received my 2038R in mid September after some painful order changes at the last minute. I had ordered the 60D deck with my 2038R and had ordered the Load 'N Go attachments. They were not compatible. John Deere says they have no plans on designing Load 'N Go for the 60D when used with the 2032R or 2038R because there are interference issues under the tractor with the linear actuator lift system, etc. Load 'N Go is only available for the 2032R and 2038R when used with a 72D deck.
@dustyvanbrocklin4731
2 жыл бұрын
Why does it say load and go will fit the earlier 72D like 2013 and earlier and 2017 and later but the 14-16 say it will not fit? Asking because I have a 2015 3033r and would love the load and goes.
@tony8354586
2 жыл бұрын
Tim, have you looked into storing the VENTRAC deck vertically ? Would your second option work?
@TractorTimewithTim
2 жыл бұрын
Never even considered it. Interesting question!
@bdp3502
2 жыл бұрын
Hi Tim. Do they have the load and go for the 60D for the 2038R yet? Thanks
@bdp3502
2 жыл бұрын
Sorry. Asked this before I watched the video. 🤪
@mcinkyt
2 жыл бұрын
Can you pick up a Zero Turn and store it on its tail like the VERY old R38's?
@davidsalmon4390
2 жыл бұрын
Hi Tim, thanks for another great video. Do you have a contact at Deere that you could put a bug in their ear to offer the load n go for the 2038R 60D deck? I have to believe there are a number of users that would love that option
@TractorTimewithTim
2 жыл бұрын
I'm sure they are aware. There must be some physical issue preventing this combination.
@tgilldesign
2 жыл бұрын
Issue I see with the Deck Dolly, and why I decided not to purchase it is: COST..... pricey solution...... and, the stand brackets stick way out from the deck, thus taking up extra floor space.... deck axles are the simpler, cost effective solution and take up the least floor space..... what happened to the Deck Axles vender on Green Tractor Talk ???? Love those deck/axle stands.
@maryriser7836
Жыл бұрын
Can your wife use the deck dolly? I need to more room under my shed. I have a grapple, mower deck, bucket, fork, landscape rake, box blade, tiller and no room under the shed!!
@TractorTimewithTim
Жыл бұрын
No, Christy cannot lift the deck dolly. Try the deck stands from MuddsCustoms.com
@cdee6096
2 жыл бұрын
I am under the impression that there is no load N go for the 2032r and 60 inch deck. I wish there was.
@homesteadingkosher1005
2 жыл бұрын
@tractortimewithtim Hey Tim, is it not possible to or would it be unwise to drain out the oil for the winter or long term vertical storage?
@Mrbink01
2 жыл бұрын
JD looks to be a much handier solution. Deck Dolly just takes up too much real estate to maneuver.
@user-pg4vb4ek7m
4 ай бұрын
the JD deck stand you showed is not on the Mudd website
@TractorTimewithTim
4 ай бұрын
We gave up on Mudds. Go to heavyhit heavyhitch.com you’ll find it there. Use code ttwt for 5% off!
@BradMyers
2 жыл бұрын
Those critters have away of working into your heart.
@willardjropp7669
2 жыл бұрын
Will the load and go brackets work when you mount a thrower/blower on the side of mower deck for bagging grass clippings?
@TractorTimewithTim
2 жыл бұрын
Yes, with TKV20. Does not work with power flow.
@jtmazzy05
2 жыл бұрын
I have the Deck Dolly - works perfectly - but the mower deck gearbox leaked a puddle of oil on the ground. Is there anyway to stop that from happening? I imagine with this many people owning one there must be a way....
@TractorTimewithTim
2 жыл бұрын
Yes. The vent can be removed and replaced with a 1/8” pipe plug. Of course, you need to reinstall the vent before you use the deck again. I think the vent may not be working properly if it is leaking like that…but not sure. Anyway, temporary replacement works fine.
@jtmazzy05
2 жыл бұрын
@@TractorTimewithTim THANK YOU for such a prompt reply!!! I'm going to pick up a plug - hopefully soon. In the meantime I just laid the deck dolly and deck down on the ground.
@TractorTimewithTim
2 жыл бұрын
You’ll need to refill the oil before mowing with it.
@davepanizzi8259
Жыл бұрын
Tim ,I ordered the deckstands from Mudds. All they sent was the wheel. Their website is very misleading.
@TractorTimewithTim
Жыл бұрын
Oh my. Please email or phone them. They will resolve the confusion and make it right. Quality people!
@Diantane22
2 жыл бұрын
Went to Mudd Custom's website. Guess sales of the deck stands were really good. It now says, "SOLD OUT". There is no further information. Anyone else know if they are being sold elsewhere?
@TractorTimewithTim
2 жыл бұрын
Email him. They may be available soon
@rshotty9039
Жыл бұрын
2022 72D mower deck gear box no longer has a breather port
@TractorTimewithTim
Жыл бұрын
Interesting. I have a 22 72D. I’ll take a look.
@jdcreamer435
2 жыл бұрын
Kubota have any options for load and go?
@TractorTimewithTim
2 жыл бұрын
The only ‘option’ I know of is “trade it for a Deere” :-)
@jdcreamer435
2 жыл бұрын
@@TractorTimewithTim No way! I actually had a 2018 1025r. I now have a kubota b2601. And I am very happy with it, had quite a few issues with the 1025r and mostly with the mid mount mower. I still enjoy all your videos. Keep it up!
@robertdodds8401
2 жыл бұрын
Tim will the Mudd stand work on a Deere 72 inch deck?
@TractorTimewithTim
2 жыл бұрын
Yes…at least they work on mine.
@N57RU
10 ай бұрын
Mudd's DSJD60D1S Mower Deck vertical Stands show "Discontinued"...........
@TractorTimewithTim
10 ай бұрын
You can now get them from heavyhitch.com use code ttwt
@N57RU
10 ай бұрын
@@TractorTimewithTim Ordered. Thanks
@marvinjackson2641
2 жыл бұрын
What is the price on the Deck Stands?
@TractorTimewithTim
2 жыл бұрын
Muddscustoms.com
@valeroush2407
2 жыл бұрын
Hi Mr Tim , I’m wondering if anyone makes a dolly for a 4 ft rotary cutter . Thanks sir
Пікірлер: 185