much much better! really enjoy the mechanic/garage videos
@AndyManCam
6 жыл бұрын
Thanks! Glad to hear it as LOTS more are on the way !
@vicente8354
3 жыл бұрын
Much better sound... Nice
@AndyManCam
3 жыл бұрын
Cheers, I totally agree!
@jeffmitchell9214
6 жыл бұрын
I remember the last muffler you beat off of the versys. Even I had a headache after that . Cheers!!!
@AndyManCam
6 жыл бұрын
I know right!! I almost felt disappointed with this one as it was too easy!
@ltrics
6 жыл бұрын
I have two MIVV GPs on my TDM 900 (the really short ones), and I have to say without the db killer my brain melts out of my head. It is friggin loud, puts some Harleys to shame on the "annoy everyone around you" scale. With the db killers in though it does bring out the lovely sound of the 270 twin withouth being stupidly loud, thus they are staying in :) Looks great with the new pipe, hope to see other mods comming! Also sounds rather decent, even though I am the biggest fan of inline fours. Keep it up good Sir!
@AndyManCam
6 жыл бұрын
I can imagine that sounds pretty meaty! I'm happy with the sound of mine with killers in too tbh. I wanted a bit more noise, not ALL of the noise!
@samuelgillard2196
6 жыл бұрын
Looks nice. I've fitted a Remus powercone on my FZ1 Fazer, huge improvement over the dust bin stock can, can't believe how much that thing weighs! Recently discovered your channel, enjoying your vids. Subbed.
@AndyManCam
6 жыл бұрын
+Samuel Gillard Thanks Samuel and welcome aboard! I bet the Remus sounds very nice! It seems everything is an upgrade from that humungous stock can! I almost had to rig a winch up out of belts and zip-ties wrapped around the garage rafters to get the beast off!
@eustonhotel1
6 жыл бұрын
Sweet. Nice tunnel work.
@AndyManCam
6 жыл бұрын
+Roussillon 1 Thanks. It had to be done!
@Viper6-MotoVlogger
6 жыл бұрын
That looks and sounds way better mate. I would put some blue loctite on that nut. Ride safe mate.
@AndyManCam
6 жыл бұрын
Cheers mate! I think you might have a point there... (forgets, pipe falls off at 80mph...)
@goldfever4570
6 жыл бұрын
Yeah, that's filthy! Will sound mega on the 3rd gear twisties.
@AndyManCam
6 жыл бұрын
You're so very right! I just need a chance to prove it!
@TheSpectre223
6 жыл бұрын
Sounds much nicer dude. Keep the vids coming
@AndyManCam
6 жыл бұрын
+Spectre223 Cheers mate! Will do!
@vicpnut1
Жыл бұрын
Each it’s actually for sale now in the USA for less than $200, I think $181,$182,183 or there abouts ….which me being novice in wrenching a bike at best ,is why I’m watching this to decide if want to chance it …think if/ when I do this ,me being on is side of the pond will drill and chisel the honeycomb out too…
@vicpnut1
Жыл бұрын
Oh yeah almost perfect engine note….would Probably like more growl but for the $ and the age and miles on mine this’ll be fine
@AndyManCam
Жыл бұрын
Hey Vic. The wrenching involved with changing the end can it’s about as minimal as it gets mate. You’ll be fine. The sound is definitely improved with the removal of the CAT in the header pipe! 😉
@BulldogGaz
6 жыл бұрын
Nice one mate of course I got to hear that live in the tunnel......noisy bugger he he
@AndyManCam
6 жыл бұрын
Nah! The Versys was louder!!
@HippoDrones
6 жыл бұрын
Sounds ace mate..... and drive by noise tests is what it is all about so adding that was aces too! :-) Just as a side note, the way you put the spring on may catch clothing or scrap skin when cleaning the bike, if you put it on with the closed ends of the hooks outwards it'll be smoother than a smooth thing should your clothes/fingers/knuckles brush against it! :-)
@AndyManCam
6 жыл бұрын
+Hippo-Drones I was expecting a little more noise from the flyby. But then i wasn't going super quick! Good tip with the spring. Makes perfect sense. Cheers!
@jeffmitchell9214
6 жыл бұрын
Oh Thank God! I am so glad someone told you about the spring on the muffler. I saw it and forgot to say something. Bless you and be careful. jdm
@AndyManCam
6 жыл бұрын
Which reminds me, I've still not remembered to change it yet!!
@HippoDrones
6 жыл бұрын
hahaha, he's not the messiah, he is a very naughty boy! :D
@CaptainK007
6 жыл бұрын
Pfff barky poppage.... finanz minister editing. Was expecting a shizzle full of expletives when the Can spring sprung... 😂🏍💨😊🍻🍻
@AndyManCam
6 жыл бұрын
The expletives I have to dial in cos my mum watches. I am just a dancing puppet for a squabble of oppressive overlords!!
@BucketWheat
5 жыл бұрын
I did the Yoshimura R77 exhaust on my 2012 FZ1...and it 'saved' almost 10 US Pounds...and sounds very similar to your Storm unit. I have the next Gen engine, but had the very same exhaust.
@AndyManCam
5 жыл бұрын
It's such a simple but huge weight saving! And that extra noise....
@Based....
6 жыл бұрын
Looks/sounds better Andy 👍 Btw 3:57 wing mirror face reveal 👀
@Fjdy1jd1
6 жыл бұрын
AMC has a beard! :-O Well, there goes my mental guess of what he looks like.
@AndyManCam
6 жыл бұрын
OOps! Blink and you'll miss it!!!
@AndyManCam
6 жыл бұрын
It was just a disguise...
@TheSpectre223
6 жыл бұрын
He was on German TV so you can see him much clearer there, but hey :P
@Fjdy1jd1
6 жыл бұрын
I read that before, but never saw a link to it. And I just assumed they showed him in shadowed profile like an organized crime informant. ;-)
@aprilia6753
6 жыл бұрын
Well done....Look's good..good Sound. .🖒
@AndyManCam
6 жыл бұрын
Cheers!
@seventysevencats
6 жыл бұрын
Sounds great.
@AndyManCam
6 жыл бұрын
+Curve Ahead Cheers!
@johna6968
6 жыл бұрын
You missed the dB killer removed sound check..
@AndyManCam
6 жыл бұрын
+Jay B Sadly in these pipes the db killer is riveted in. There's no power in my garage so i had to leave it. Another day perhaps.
@AndyManCam
6 жыл бұрын
+Solis 560 Possibly. Though i think in this case it is a cost saving exercise. Way faster to pop in a rivet than fiddle with a nut and bolt. Less parts too. The more expensive, but almost identical, MIVV oval can has a bolted in baffle.
@MackoUrsa
6 жыл бұрын
Nope. MIVV Oval has the db killer riveted in. Had, actualy. I sort of lost the rivet somewhere... O:)
@HalfdeadRider
5 жыл бұрын
@@MackoUrsa LOL you can't lose a rivet, the whole point is that it can't be removed without drilling them out. What you must have lost is the bolt/screw.
@MackoUrsa
5 жыл бұрын
@@HalfdeadRider Yeah I can. I "lost" it with a drill :D
@bogthing1
6 жыл бұрын
Lovely! I agree, the new trend of stubby cans don't appeal to me. To these old eyes, the stacks are an integral part of the bike's design, and should compliment it, and not resemble something for a Briggs & Stratton.
@AndyManCam
6 жыл бұрын
Same song sheet mate! :D
@02bigkev
6 жыл бұрын
Nice sound mate :)
@AndyManCam
6 жыл бұрын
Cheers Kev.
@exothermal.sprocket
6 жыл бұрын
I fitted a full Yoshi R77 carbon to a former 2011 FZ1. ECU flash, Powercommander V with custom map, PAIR removed and blockoffs, K&N filter, snorkel out, and airbox cut. Baby made 150 whp and sounded rad. Everything was improved, throttle felt like a well tuned carburetor. Bike ran cooler, much less vibration, fuel economy was the same, no torque dips and super controlled throttle. No per-gear restrictions, no ignition or throttle fly restrictions. Yamaha restricted the bike a LOT from factory. www.ivansperformanceproducts.com/stkvsfinalSO.gif
@AndyManCam
6 жыл бұрын
That sounds bloody brilliant! Lot of money spent there though! I'll have to take it a step at a time!
@thelikeablerider8800
6 жыл бұрын
Nice pipe there chap
@AndyManCam
6 жыл бұрын
Thanks you very much dear fellow!
@GT-kt6tz
3 жыл бұрын
Nice bike, could you tell me how much you pay for this exhaust please? There isn't any price on their website
@AndyManCam
3 жыл бұрын
I think it was about 250€
@playerlazar73
3 жыл бұрын
Didn't you have a video of the SP COBRA ? why did you delete it ? wasnt it good or ?
@AndyManCam
3 жыл бұрын
The video sadly wasn't performing well. I regularly try to remove any videos that aren't doing well, to stop them affecting the channel.
@Sus_scrofa
3 жыл бұрын
Hi Andy, MIVV bietet einen zusätzlichen Kat für den Storm an, der angeblich für den TÜV und die korrekte Verwendung benötigt wird. Hast Du bzgl. Abgasprüfung Erfahrungen mit Deinem Storm gemacht? Du hast den ja nicht verbaut. Finde Deine Videos super! Vielen Dank
@AndyManCam
3 жыл бұрын
Hi CC. Ich habe tatsächlich kein TÜV Erfahrung mit dem Storm, aber war zwei mal bei den Blauen Kitteln mit zwei anderen Töpfe. Cobra SPX und BOS GT. Beide hatten kein zusätzlichen KAT und alles war gut. Da die FZ1 auch ein KAT im Krümmer hat, hat es anscheinend genügend putzkraft um angemessene Werte raus zu pusten. 👍🏻
@northernninjarunner5506
5 жыл бұрын
The stock bazooka they put on is awful. The new can sounds much better. Does it have a removable baffle? Do you need to remap for it to make the most of the new can?
@AndyManCam
5 жыл бұрын
It’s certainly big! But I’ve heard worse. In any case, it still had to go!! The newest can (Speedpro Cobra SPX) is even better still! To a certain degree, the ECU compensates for the different character of the end can. As such, no need to remap. Maybe with a full system and a sports air filter you might need to consider a remap.
@eivoilaittaaverotukseen6426
6 жыл бұрын
The ticking noise is troubling though. What's causing that? Timing belt (do these even have one)? Or what?
@AndyManCam
6 жыл бұрын
It worried me at first too. But apparently it's typical for the bike. Just need to make the pipes louder!
@disekjoumoer
6 жыл бұрын
Ok, you can go on holiday now, but don't forget to water the bike, I mean the cats, and by that I mean the Triumph Tiger Sport, so that it grows into a big bike next year for you to test ride.
@AndyManCam
6 жыл бұрын
Hahaha! Thanks! If only it was that easy to line up bikes for next season! I'd have a greenhouse and an allotment instead of a garage!!
@disekjoumoer
6 жыл бұрын
You might find a pateron dorrar or two to help ;)
@disekjoumoer
6 жыл бұрын
Also, that can sounds very manly, Andy Man Camly, in fact. Ok, I'll go now.
@AndyManCam
6 жыл бұрын
+disekjoumoer That WOULD be rather splendid! 😀
@disekjoumoer
6 жыл бұрын
It is done, the foul deed!
@metalhead6
3 жыл бұрын
Grüße aus Stuttgart 😄
@AndyManCam
3 жыл бұрын
Moin!
@robertreid833
6 жыл бұрын
Almost thought you had forgotten the tunnel rev bomb...but no, thank goodness! Did you get the fuel cut off thing sorted in the end?
@AndyManCam
6 жыл бұрын
NEVER!!! No sadly not yet. That will require an ECU remap. Boosterplug has helped though.
@steve0680657
6 жыл бұрын
what about the answers to the "qwestions" video?
@AndyManCam
6 жыл бұрын
+S Fear not! They're next up!
@coverttwenty
6 жыл бұрын
You'll have to rename yourself Andy Man Can.
@AndyManCam
6 жыл бұрын
Endy Man Can
@disekjoumoer
6 жыл бұрын
Yew've got a reely good seaouf efriken eksent, ek sê
@AndyManCam
6 жыл бұрын
+disekjoumoer Thenks. I troy moy bist.
@andrei4d
6 жыл бұрын
i jush laughed really hard at @3:14 :)) made my day!!
@AndyManCam
6 жыл бұрын
+Andrei_in_moto My attempt at a bi-lingual install! 😎
@neilb4297
6 жыл бұрын
Where has the magical magnetic dish gone?
@AndyManCam
6 жыл бұрын
Don't panic! It's still kicking about! It's actually bulging with spares and replaced parts right now!
@MicMurphy1981
4 жыл бұрын
Thank you for this video i jut purchased a 2008 FZ1 with 6k like new just like you and iam going to do the exhaust mod soon. That pipe is crazy loud oooooweeeeeee. I have been looking at Delkevic but i want this exhaust here in america. I want one where do i get one?
@AndyManCam
4 жыл бұрын
My pleasure! Thanks for watching! I have to say though, that the Cobra SPX that I had on after this was MUCH louder!! kzitem.info/news/bejne/rmeEyqeXsHilZ2U
@ergorydecueto
4 жыл бұрын
Hi, after two years, could you tell us if the exhaust is still ok?
@AndyManCam
4 жыл бұрын
Hi! I would love to, but I'm now 3 exhausts further on from that one! I've had no complaints from the guy that I sold it to, so I assume all is well!
@celestinosanchez6031
4 жыл бұрын
En mi anterior Fz1 2007 monte el mivv oval inox 265€ en la Fz1 2011 que tengo ahora estoy pensando en montar el storm gp inox 211€ o el mivv gibbli 328€ Creo que al final será el storm.
@AndyManCam
4 жыл бұрын
Cool, Hope you like your choice!
@bnplaza
5 жыл бұрын
nice video. Did you get anything performance wise.
@AndyManCam
5 жыл бұрын
Not that I could really tell. I think maybe the engine felt a little more ‚free‘. But. Not enough difference to tell on my crude butt-dyno.
@ollydubhead
6 жыл бұрын
Thinking of getting one of these next.... So, in the fitting part of video, tail tidy........in the riding video......stock.... Do you live in altered time....?
@AndyManCam
6 жыл бұрын
I live in a fantastical TV like world where continuity is a flexible and transient being! ;D I actually removed that hideous home made tail tidy straight after fixing up the new pipe, hence the return to stock rear end. :D
@ergorydecueto
4 жыл бұрын
what about the test without DB killer??? 😏
@AndyManCam
4 жыл бұрын
Unfortunately on this can, the dB Killer is riveted in. So if I’d taken it out, i wouldn’t have been able to get it back in!
@wilswood8137
6 жыл бұрын
Sounds great :) Now remove the baffle , and throw it away :) There's a good boy :)
@AndyManCam
6 жыл бұрын
No can do! The rozzers are tight on that stuff and it invalidates your insurance! Plus it's riveted in!
@psychoticmemories2583
6 жыл бұрын
I just finished watching your €-Tour videos and see that some of the wet has leaked into this one. Sorry about that.
@AndyManCam
6 жыл бұрын
+psychotic memories Haha! It follows me everywhere mate! 😂
@F4celessArt
6 жыл бұрын
30k KMs you say? My 07' FZ6 had only 12k on it this summer.
@AndyManCam
6 жыл бұрын
That'S insane! 30k is already WAY below average!
@Fjdy1jd1
6 жыл бұрын
2 months ago, a fool in a truck ran a stop sign and totaled my 2008 Versys with 21,000 miles. 10 days ago, I bought a 2009 Versys to replace it. It was being sold by the original owners widow. It had 745 miles on it. That is not a typo. It had not even completed the break-in period.
@AndyManCam
6 жыл бұрын
+Fjdy1jd1 That's incredible! Sad story but what a find! Enjoy the NEW old bike.
@gordonLP
6 жыл бұрын
Hi ACM, Do you have to do anything (i.e revert to old can) to pass the emissions test?
@AndyManCam
6 жыл бұрын
+Gordon Waltham Hi GW. Apparently not. The CAT that stays in the pipe allegedly still brings the bike under TÜV and AU testing limits. It's just no longer EURO3 compliant. Though we'll see for sure in 2019 when the next test is due!
@gordonLP
6 жыл бұрын
Thanks AMC, 2019? At 74 it's speculation !
@AndyManCam
6 жыл бұрын
+Gordon Waltham Ha! I believe in you. You've gotten this far!
@yperformance
3 жыл бұрын
DBD kill on?
@AndyManCam
3 жыл бұрын
It's riveted in to the pipe on this model. You have to drill it out to remove it.
@yperformance
3 жыл бұрын
@@AndyManCam Ok, but the sound test in your video its whit DB kill on right?
@AndyManCam
3 жыл бұрын
That's right. It's still in there.
@BiglumpADV
6 жыл бұрын
Did I spy a proper sat nav on your bars?
@AndyManCam
6 жыл бұрын
+Tack2252 Yes you very well did! I'm finally a growed up!
@BiglumpADV
6 жыл бұрын
Andy Man Cam future tours might go far to swimmingly, just have to rely on the rain to wind you up and keep us entertained 😂
@theheroblob5036
6 жыл бұрын
I, too, will miss the AMC sat-nav rants! Quality entertainment... :-)
@AndyManCam
6 жыл бұрын
+Tack2252 Don't worry, there'll always be something to piss me off! 😂
@AndyManCam
6 жыл бұрын
+The Hero, Blob The rants will be the same, just the subject will vary!
@inthenameofjustice8811
6 жыл бұрын
Okay. So I watched your Q&A video and made a comment that was a bit long and wanted to say something else but felt guilty so I did not write it and I thought why not come to this video and say it here with nicely clipped, short sentences but that didn't work either. Anyway.....You mentioned that you liked silly humour and fell in love with Monty Python. Have you ever listed to the people they stole almost everything from? They are known as, The Goons. Mostly radio, though they tried a bit of telly and it didn't work very well. It takes a while to get to know the characters but there are some seriously genius lines of comedy in their sketches. kzitem.info/news/bejne/15qw0nupp3qhhYo Seriously good to listen too as you ride the boring motorways.
@AndyManCam
6 жыл бұрын
You'Re the second to suggest the Goons. I've not given them much time, but will seek to remedy.
@UnburdenedByWhatHasBeen
6 жыл бұрын
Barky popage..lol. Take that db killer out, u will hear some real barky popage
@AndyManCam
6 жыл бұрын
On this pipe, it's riveted in place. Nothing a drill can't fix, but that's way down the list of jobs on the old girl!
@UnburdenedByWhatHasBeen
6 жыл бұрын
Andy Man Cam i hear that! Nice bike man..
@AndyManCam
6 жыл бұрын
Thanks dude. She's a beaut!
@cozziekid
6 жыл бұрын
Get that bung out! Call yourself a biker?! :)
@AndyManCam
6 жыл бұрын
Maaaaybe later... When I don'T need to worry about the rozzers taking it away from me!
Пікірлер: 134