I like how the whole thing just falls over at the end😂
@CharizardLMAO
Жыл бұрын
Thanks! I can make the doors for my landing gear from my plane.
@terr-rawr-saur
Жыл бұрын
Great!
@icfr0st78
Жыл бұрын
I think I gave something the wrong numbers cause my door doesn't work and I'm too stupid to know what's wrong with it. Edit: Somehow I figured it out. I don't really know what I did though
@terr-rawr-saur
Жыл бұрын
When you place a pivot down its starting point has an output of number 0, if you want it to rotate in the direction of the positive arrow, it can rotate 90 degrees which is an output of 1, and if you wanted it to go the other way towards the negative arrow, it has a final output of -1.
@blixa2426
Жыл бұрын
There is a workshop switchbox that is 1x2 that I use on my creations
@justcodey
8 ай бұрын
I use the same thing exept a homemade version so I can change numbers for other projects
@Cherrie_The_Furry
10 ай бұрын
Interesting
@freightersonthegreatlakes995
Жыл бұрын
Or you could just use a simple numerical switch box
@arii1834
Жыл бұрын
but this is more compact, he only needed to make the switch box a 1x2 instead of the 1x4 he did but... oh well
@terr-rawr-saur
Жыл бұрын
The space required to use the logic parts is at least 5 blocks of space per door, 6 if you want specific open settings, vs a custom micro controller with all the logic compacted inside is 2 blocks per door. And, using a custom micro controller and instrument panels for the buttons you can bring the size of the logic blocks down to (number of doors + 1). Its also nice to use something simple like a door as an introduction to micro controllers.
@c4py813
Ай бұрын
what block is that bar you put on top? if that makes sense. kinda new to stormworks logic things
@cyborgrat
9 сағат бұрын
you can adjust the size of the micro controller, in the property tab
@Exo294-zb7ee
6 ай бұрын
how do i add a microcontroller i mean like those that you can edit because i cant i think
@terr-rawr-saur
6 ай бұрын
If you join my discord, there is a Resources channel which has a blank micro-controller zip file. discord.gg/7a4uWCjMft You can download it, extract it into your microprocessors folder located here: C:\Users\TerrRawrSaur\AppData\Roaming\Stormworks\data\microprocessors And then to add blank micro-controllers they come up as components when you are building. The naming scheme is 1x1, 1x2,1x3,1x4 etc up to 6x6.
@mouha084
Жыл бұрын
Tysm
@smiltz6025
11 ай бұрын
So do i keep one with 1 or keep both as 0?
@terr-rawr-saur
11 ай бұрын
one with 1 and one with 0.
@AviatorBlake1
Жыл бұрын
Where do you find a Microcontroller???
@terr-rawr-saur
Жыл бұрын
In the vehicle editor, there is a button up in the top right that takes you to a micro controller editor. You can create them there, but make sure you name them and save them afterwards.
@AviatorBlake1
Жыл бұрын
@@terr-rawr-saur Thank you, i got the door to work but now i have to hold it when i try to open it
@terr-rawr-saur
Жыл бұрын
@@AviatorBlake1 The button you used might be a push button rather than a toggle button.
@AviatorBlake1
Жыл бұрын
@@terr-rawr-saur Oh! Thank you for the help it works now
@sens9043
6 ай бұрын
Hello from 2017
@terr-rawr-saur
6 ай бұрын
Actually from 2023.
@balazsdombi8554
Жыл бұрын
Its not working , what am I missing
@terr-rawr-saur
Жыл бұрын
Check that the electricity is connected, and that the logic is connected.
@balazsdombi8554
Жыл бұрын
@@terr-rawr-saur its all connected + separated from the main body
@terr-rawr-saur
Жыл бұрын
Check the open/closed values. If you build the door open the open and closed values should be something like -1 for closed and 0 for open. If that makes the door open the wrong way then it would be 1 instead of -1.@@balazsdombi8554
@jaketannar7094
8 ай бұрын
How do you get it to open without exploding because when I try to put a wall next to the door it gets stuck on the wall and explodes Edit: and in yours, the car door is right next to the chassis but it doesn’t get stuck
@terr-rawr-saur
8 ай бұрын
Usually pivots will damage other blocks when they are trying to move into their hitbox at speed. It might be a direction thing so you could try using an inverted signal. If you are sending a 1 signal send a -1, for example.
@Peter-qb9jk
Жыл бұрын
And... I didn't understand anything 😅😂
@terr-rawr-saur
Жыл бұрын
To be fair. Its not a very detailed explanation. Basically a switchbox lets you change the doors rotation value between 2 numbers. 0 being the open state, and 1 (or sometimes -1) being the closed state. Then pushing the button makes the switchbox change the number output.
@Peter-qb9jk
Жыл бұрын
@@terr-rawr-saur It's a good guide, the real problems it's me! I have started playing only yesterday 😂😅
@lastxp
10 ай бұрын
Tutorial is to long
@Dr_Fish_feet
4 ай бұрын
don't even try
@terr-rawr-saur
4 ай бұрын
Try what?
@Dr_Fish_feet
4 ай бұрын
@@terr-rawr-saur it’s to quick I had to slow it down on Adobe 😂
@Dr_Fish_feet
4 ай бұрын
It does work, though I’ll admit that, the thing got to remember is to put the other one to -0
Пікірлер: 39