Thank you for the video. I have very basic question; how you send signal to the pump? Im fully new to it. Thank you in advance
@hydronicworld
2 жыл бұрын
Hi Najibullah, What kind of signal are you referring to? If it is a variable signal like 2-10V then you wire it into AI1 or 2 so you can control the speed of the pump for example. If you want to turn the pump ON or OFF you wire a thermostat or a switch to any of the DI1 or 2. Or you can just jumper the terminals of either of these two digital inputs. Thanks for watching.
@julienservais
3 жыл бұрын
i cant even turn it on, sometimes its on but most of the times its off
@hydronicworld
2 жыл бұрын
Hi Julien, Sorry for the late reply. You can turn the pump ON or OFF by closing the contacts on DI1 or DI2 the two digital inputs. You can also just do this: In the home screen press the “index” button, the three dotted button to the right of the scrolling button and choose “Pump On” so the pump will be on all the time. This is a manual command so it will take priority over DI1&2.
Пікірлер: 4