Good morning Jook , thanks for a no no nsense , informative post that simply gets the job done , may I ask was there a specific reason you settled on 32mm core ? Cheers.
@jookrixon9393
4 жыл бұрын
Hi Paul. That was the biggest size I could get down the end, plus if you measure up the exhaust exit it is not any wider. In my mind there was no point making any larger a hole only to have the gases restricted further down the line. Also, 30.6mm perforated stainless baffle tube is a standard size, I have since welded a piece of this from the first baffle plate to the exhaust exit which alters the sound slightly but can be seen if PLOD shines a torch up it. Hope this helps.
@pauljones2531
4 жыл бұрын
@@jookrixon9393 cheers matey , that's top draw thinking that is , thanks for your advice :)
@Romski1978
6 жыл бұрын
Hi I just bought that silincer but not for triumph, for my Kawasaki W800 how I fit this to my baby don't know yet . Is any another way to remove this bufflers, I'm struggling to find any one with that kind of drill around Gloucester
@jookrixon9393
6 жыл бұрын
Motochef . Perhaps you could extend a metal hole saw from somewhere like machine mart, but that would involve some lathe and welding work. I will check my Gloucester connections, see if i can put you in touch with a drilling company down that way. I thought D Drill had a depot nearby??
@Romski1978
6 жыл бұрын
If you manage that that will be great, I will appreciate and post a movie how that beauty power twin will sound with that new silincers 👍👊💪
@animesfyzsarkar598
6 жыл бұрын
Hi Jook. Thanks for the video. Isn't that a holesaw for marble/granite etc.? I guess a metal holesaw would work better. Can you recommend the length of this holesaw bit? I understand the dia would be 32mm. Thanks in Advance. :)
@jookrixon9393
6 жыл бұрын
Hi. Yes I think that a metal hole saw would likely work better but I couldn't find one with more than a 95mm drill depth. The first baffle plate is roughly 120mm down inside and the second 100mm past that. Standard wet diamond core bits for stone and re enforced concrete come in at 300mm long, and mine at 400mm long. I guess one could cut a standard hole saw midway, extend it with the correct size tube and weld it together but that is a lot of faffing around when diamond drills are ubiquitous.I hope this helps. Thanks for watching.
@animesfyzsarkar598
6 жыл бұрын
Great! Thanks for the technical info regarding the baffle plate distances. I would urge you to post this DIY project at Triumphrat.com website and many will benefit from it. You are probably the first to do a Street Twin Bafflectomy! Do let us know further your observation on the mileage, performance etc.
@jookrixon9393
6 жыл бұрын
I looked at a friends Vance and Hines pipes. From what I could see they had a perforated baffle tube the length of the second baffle plate to the exhaust exit, and a solid tube of the same size between first and second baffle plate. I need a closer look but bought some stainless baffle and solid tube today. I think I may be able to copy this set up and weld it place. I need to adapt my welder head to be able to get 120mm down a small hole but feel confident this is achievable. Hey, if I don't try I'll never know. If it works I'll let you know via another vid. Vance and Hines performance for £20?? we shall see. Don't know how to share on Triumph rat, but if you can, please feel free.
@animesfyzsarkar598
6 жыл бұрын
I think it will. You got to try. Just make sure you have enough light focused inside the tube. You might consider using a headlamp or a small led spotlight tied to your welding gun. Sorry for posting a wrong link earlier. Just register at www.triumphrat.net/ You will also get loads of info from other users about almost any mod that you may try. All the best.
@demiruyar7382
6 жыл бұрын
Hello Jook, I own the Street cup which has shorter exhausts, could you please verify, if the exhaust internals are the same? I have attached a video link that I took. Im not sure weather that small hole is the baffle it self. Should I follow the same methos as yours, or just drill holes on the plate? Best Regards, kzitem.info/news/bejne/zJupq41qi6KSdWk
@jookrixon9393
6 жыл бұрын
demir uyar hi, hope this works, doing from my mobile and am not tech savvy. From the video link i saw from you i would suggest what you have looks very similar to what i removed. My understanding of street twin and street cup is they are virtually the same. I would guess that removing that restriction would be the same as i did. If you look at the vid i made, there appears very little difference. Hope this helps.
Пікірлер: 15