Look at you go ol’ son!! Solo filming a project. I’m proud of ya 💪✊
@pab40sc
Жыл бұрын
The camera angle from above was extremely helpful. Look forward to more videos and the sequence used to install cable and strings.
@michaelhage489
Жыл бұрын
Awesome, great timing. I’m putting Gas Strings on my V3X 33 for the first time. I’d love to see a video on timing.
@ronsgarage2057
3 ай бұрын
Never knew strings come pre twisted to spec! Great work as usual Josh! Thank you!
@richardganz9318
Жыл бұрын
These video's are so helpful when it comes to learning new bows. Changing strings and tuning different bows can be challenging since finding the correct way online is almost impossible. Finding one source or video with all the details on this is priceless, it saves some much time searching every forum or KZitem. Thanks again
@stephenmarcinkiewicz
Жыл бұрын
Would love to see you hook up with Tim, build a dedicated film studio around a bow press and pump out more content like this👍
@nicolaalberti7736
Жыл бұрын
Step 1: go to the draw board and measure exactly the draw lenght. Step 2: go to the press, replace ONLY one cable and its yoke. Step 3: go to the draw board and synch the cams adjusting the lenght of the new cable you have just installed. Step 4: go to the press and replace the other cable and its yoke. Step 5: go to the draw board and synch the cams adjusting the lenght of the last cable you have installed. Step 6: go to the press and replace the string. Step 7: go to the draw board and measure the draw lenght, adjust it until it is the same exact lenght as you measured in the beginning. Done: no more adjusting required, you can install accessories, D loop and go tuning. This is how I replace strings at home, best method I've found.
@Kodyanderson402
Жыл бұрын
I absolutely love the more in depth videos over the fast forward how to bow set up videos. I’m pretty stoked to watch the cam tuning videos coming up and would love seeing some more in depth string,sights,cam,arrow videos!!!
@royhoglund1322
Жыл бұрын
Really good information. The little pro tips that seem minute are really helpful. I can't wait for the tuning videos! It would be helpful to know how much paper tear correction you get from each tophat in the kit. I'm really glad you are doing these videos! Nothing beats learning from a pro!
@michaelmiller6197
Жыл бұрын
The lower camera seemed hazy. I love the video. My brother and I have been making our strings and installing them. It's been a big learning curve.
@marksamluk9879
Жыл бұрын
Great VID and thank you for doing this. I have a press I brought from you and this is a great tool for us new bees
@rc7175
Жыл бұрын
Great Video. Simple, straight forward and to the point.
@drewolm
Жыл бұрын
Plus one on the magnet tray. I put two on top of my press. One holds my Allen wrenches, razor blade and a spare axle I use to push the axle out. The other I put my parts into.
@Brad-yv1fo
Жыл бұрын
Great video. Would like to see you build a set of strings and cables step by step and then install on a bow.
@kurtwest5306
Жыл бұрын
This video made the install look alot easier than some other videos I have watched, thanks MFJJ! Look forward to the timing videos.
@zachallen9170
Жыл бұрын
Great video, breaks it down to not be so tedious and gives some good pointers along the way, definitely makes me feel a lot more comfortable to change mine myself instead of having to go to the shop, wouldn’t get this level of content anywhere else, excited for the next segment of this
@bertcard2307
Жыл бұрын
Master Tech sharing his skills and knowledge thank you
@bradlemur4153
Жыл бұрын
Hell yea man! I’m stoked for future lessons with master MFJJ!
@the_sharp_carpenter
Жыл бұрын
That was an easy to follow. Only thing I would say is work on getting the bow completely in the frame, and making sure the focus is locked. Other than that, looking forward to seeing more of the tinker/"bow building basics" always good even for people that already do it.
@tye1776
Жыл бұрын
Even though I don’t own this bow, super helpful for the process. If I ever did buy a bow like this, awesome reference to go by! Feedback like you requested. 1. Better lighting would help a ton. 2. Better shots of the cams and posts. Maybe add some still shots while editing. Thanks a bunch MFJJ! Maybe the Bowtech Solution SS next? 😉
@clintmurray3795
Жыл бұрын
I wanna say thank you! This really gave me the courage to dive in and start learning how to work on my own bow. I bought a press last week (from you of course) and today I just finished my first string and cable replacement on my new V3X. It look me a bit, but this video helped a ton! Got it all timed, and I'm gonna build a paper tuner tomorrow and hopefully be sighting it in tomorrow afternoon. Really awesome!!
@scottmclean2389
Жыл бұрын
Ordered a bow press from you after watching this video. Looking forward to the timing and tuning videos.
@michaeldusek6680
Жыл бұрын
Absolutely awsome. Looking forward to the next video
@CoachGoodwin23
Жыл бұрын
Hugely helpful - thanks Josh! Can’t wait to see the timing video!
@rodgerschwartz8255
Жыл бұрын
1st off, that was easy to read, 2nd thanks for these videos, really helps us newbies out
@adamhalcom1608
Жыл бұрын
Great video a lot of quality information that most pro shops won't tell you I appreciate that. Not sure if grating better focus on things such as the cams is possible but may help some folks. You have a wealth of knowledge and glad you are willing to share. Keep laying the content down. May God bless you
@claywhitten4626
Жыл бұрын
Where's Tim??? He's got camera skills! Just kidding. Setting up to do our own bow/arrow work at home. Great seeing "how to" videos and hearing "tips". Looking forward to seeing more videos. Thanks for answering emails.
@jons7e
Жыл бұрын
I'm running Gas Ghost XV camo strings on my V3X 33 ... huge upgrade over zebras and they are solid!
@ginop524
Жыл бұрын
Exactly what I was looking for. Thank you!
@user-ot4mf9zm7j
Жыл бұрын
This is great and well received by us DIY people that are learning to do this. I would vote for a video of how to shim a cam (not mathews) and the process involved. Very little on KZitem with this subject.
@killnme6212
11 ай бұрын
Thank you! Please continue to make these. My gas strings just showed up! I’ll watch this a couple times lol
@howieb7832
Жыл бұрын
Really appreciate your sharing this kind of thing. The little things that might go unnoticed like inserting the cable ends through the yoke plastic piece from the underside. Something that might be done wrong by the inexperienced. Looking forward to the future vids. Even simple (yeah right) things like peep/d loop alignment done by a "master" would be appreciated. Thanks Josh.
@floydfarr9347
Жыл бұрын
Great info! Seems like you’re the only one doing this. Can’t wait to see a detailed tuning video!
@fueyomichael
Жыл бұрын
Thank you for posting this! Just ordered some Gas strings from you and this was the perfect walkthrough to install them.
@craighanson6936
Жыл бұрын
First time I did mine I did not check my pictures to see if they were in focus so when it comes to reinstalling strings, I had three blurry pictures that were useless. Take the time to check your photos to make sure they are clear.
@perryknetter8577
Жыл бұрын
Get job on the solo video Thank you so much for sharing this wealth of information
@chadpotteiger9279
Жыл бұрын
Awesome content and can say enough how awesome it is that you are willing to share this info.
@58BowNut
Жыл бұрын
Thank you for all the great information!
@garaldfillmore5026
Жыл бұрын
These are great for the diy guy that isn’t close to a shop, so they can do their own work. I like that you reference the timing holes. I for one am not familiar with all makes of bows and where the timing holes or reference marks are on a cam. That helps a lot with synchronization and timing, thanks!
@chrisrothwell0078
Жыл бұрын
Great video, broke it down very simple. Here’s to many more videos.
@olehemlock
Жыл бұрын
Love it, keep these coming.
@ameridodge
Жыл бұрын
I like it keep them coming. Great job
@dfucca
Жыл бұрын
Thanks for the video. Not too bad, can follow what you’re doing easy. Fix your angles a little and you’re good. I like “common sense” and you got it !! Put more vids out.
@jeffgenchi5863
Жыл бұрын
Thank you please keep them coming! Really love all the insight.
@harveygalloway3965
Жыл бұрын
You are a lot quicker than me. When I changed my strings, it took me a while because I done one cable at a time.... LOL
@shawngirard3799
Жыл бұрын
Look forward to the follow video. The that gets into the nitty gritty of twisting cables and one would have too........Good Stuff man!
@markbuckingham6119
Жыл бұрын
Found this a really good overview & to be honest feel comfortable doing it. Would also be good to see the same procedure done on bows other than Mathews. When it comes to tuning I would also like to see how to tune some of the different types of rests (eg cable drop away as opposed to limb activated).
@clintmurray3795
Жыл бұрын
How about a video with some different ways to tune a phase 4/ V3x now. This was a great help in learning to change my own strings, but now I'm ready for the next step.
@cuylerrobinson6128
Жыл бұрын
Helpful video - keep up the great work!
@ctcooky
Ай бұрын
Thanks Josh. Good job
@db66-i6i
Жыл бұрын
LOVE videos like these. short sweet and informative!
@v.l.bradley9962
Жыл бұрын
will be watching for more bow mechanic work , enjoyed
@TheDreadedHunterTV
Жыл бұрын
Great video. I've been looking for something just like this.
@podiumarcher3447
Жыл бұрын
Glad I could help
@EARFISHY
Жыл бұрын
Awesome, great video, can’t wait for the RX7 ultra
@user-qh5iq7rp5b
Жыл бұрын
Thanks for your video I just got a phase 4 33 so I was glad to see how the strings were changed looking forward to seeing how the timing video is keep doing the videos
@mayhem035
Жыл бұрын
Man you didn't choose an easy topic to du a solo video! It was really nice. The top ca was awsome. You forgot to edit when you pulled off bolts and bits to yrhow in the magnet tray of the first cam removal. 😊 man it was really cool! Liked it alot! Keep up the good stuff man! 👌👍👊
@tedgifford1627
Жыл бұрын
Some of the close ups were blurred, but you will get there. Good info and keep up the good work and slow down just abit. I get it, time is money it seems and we do have a pause function available.
@vancejohnson1778
Жыл бұрын
Great video Josh, definitely videos I would be very interested in seeing and I think u did a good job doing it solo 👌
@jflood123
Жыл бұрын
Thanks for the excellent video. If you could add something in how to deal with peep twists and rotation issues to your project list it would be greatly appreciated.
@joevandivner9704
Жыл бұрын
I had a set of Gas strings put on my V3X and I swear it now has a twang when the shot goes off and I can not remember ever having that before with the stock strings.
@adamserres12
Жыл бұрын
Nice job very informative definitely needed for those of us learning to work on our own equipment only issue I saw is a couple things did not focus in like for example cable on the cam peg. One thing you could do here is add a few pictures of the important stuff like that to the end of each video. Just a suggestion not something that’s absolutely necessary.
@DustinL_B
Жыл бұрын
Great video would definitely like to see more stuff like this.
@davidflippo4860
Жыл бұрын
Great video! Definitely want to see a video on top hat tuning and timing the newer Mathew’s bows. Also, how many twists and what direction to get the cables to lineup in the hole? Also would like to see a string change and toming vid on bowtech ss34! Thanks man!
@fishinfreak44
Жыл бұрын
Great video!!!! Nothing against my home town bow dude. But I just feel sometimes they are trying to get you good enough and out the door. I have purchased my own bow press and need to set up shop and start doing my own tuning
@rtdrumz
Жыл бұрын
Great walkthrough
@raymondtapatu6869
Жыл бұрын
Appreciate al your knowledge and experience ❤❤👍🤘🤙👊 thank you 🙏
@jamesconrad4136
Жыл бұрын
Amazing job Josh , great content. Keep it coming brother!!!
@aaronlontine4479
Жыл бұрын
Think might be a better perspective from your View, so we see what you are seeing.....maybe not but it's a thought but I understand that its kind of a hard shot to get and stay out of the line of sight. Great Video
@The_Rut_Funnel
Жыл бұрын
As someone that doesn’t change a lot of strings I find it’s easiest to do one string at a time.
@lucysoutdoors
Жыл бұрын
The good is we know your excellent at bow work, but camera work not so much😂😂
@travispurdin84
Жыл бұрын
Thanks mfjj, great informative video
@Cbow406
2 ай бұрын
I was watching your video, going step by step, then realized im missing 1 cable... had to put one of my old cables back on
@dudleybaker2879
Жыл бұрын
Great information MFJJ
@dp5430
Жыл бұрын
Like it keep ‘em coming.
@engineerz_hero6771
Жыл бұрын
Lots of good information in the installation process. Looking forward to other brand installs. Keep up the great work. Maybe a couple splices of close ups of cams and string routing around the cams would be helpful in future videos.
@jonesboyshunting8673
Жыл бұрын
Great job for the first time doing something like this. Maybe some better looks at the cams. Keep up the great work.
@JoshHolmstead
Жыл бұрын
Looking forward to the timing video
@Will_Osborne
Жыл бұрын
Would love to see a review of a APA bow
@BuckTom-od1bk
Жыл бұрын
It would be nice to see you do some videos on tuning target bows. I know a majority are hunters on the channel but a lot of us do both and i think a lot can be learned from both categories to make a more well rounded shooter
@Pariscj
Жыл бұрын
Great video just waiting on fixing the timing on newer mathews bows
@wcwcgarner2717
Жыл бұрын
I just put a set of Gas strings on my Granite V3X 29. In flo orange wt gun metal servings. And the Total peep tech grip for mathews. The best grip on the market for mathews bows.
@mikebarriga
Жыл бұрын
I’m looking forward to seeing a video on the timing and all that. My phase 4 shoots like hot garbage.
@Jarochester
Жыл бұрын
Great video.
@mikewebb5247
Жыл бұрын
Great job!
@adriancuevas1587
Жыл бұрын
Great video as always. Not sure if its the lens on the camera that doesnt seem to focus to well on the close up shots or the lighting. May some still frames for the important close ups ?
@clarkansas6590
Жыл бұрын
Good job.
@lewiskurzawa6041
Жыл бұрын
You the man brother
@derricknalley3053
Жыл бұрын
Always great videos!!!👍
@oldpapawwithastrat9384
Жыл бұрын
Great info. Thanks
@zhickman338
Жыл бұрын
Fantastic!
@jackbuendgen389
Жыл бұрын
I think you should have the top camera zoomed onto a cam. That way we can see details. Be sure it's in focus please
@germnscoot
Жыл бұрын
Great video, do have a recommendation for a budget bow press. Most of them are $$$$$
@rickdraper2600
Жыл бұрын
Just bought me a Vertix.
@lindsayholden5255
Жыл бұрын
Love the content mate! I’m just getting into archery so absorbing everything like a sponge! Forgive my ignorance but I’m curious as to why you change the strings on a new bow? Is it a quality thing or something along those lines or is there a performance factor that comes into it? Keep the vids coming, you are entertaining to watch and love that you freely share helpful information based on experience!!
@scottscherch5974
Жыл бұрын
great video - this makes it easer when I change my strings. also what color was that ?
@user-jo2cu1jt5q
Жыл бұрын
awesome thanks man
@jeffsmith1830
Жыл бұрын
Got an omnia? My ghost strings come in next week!
@MikeAroni1974
Жыл бұрын
Great video! I'm curious if the ATA was correct with these strings. I had a set of Gas installed on my phase 4 33, and they were too long resulting in an ATA of 1/8" over spec. They has to add twists to the cables, and string to get the ATA back in spec. Maybe the shop just ordered their sets too long.
@jeffrossi3645
Жыл бұрын
would love to see a LH bow done
@matt__marcum
Жыл бұрын
Awesome video, and I can't wait to see more of this series!
@podiumarcher3447
Жыл бұрын
Glad you enjoyed it!
@slmed87
Жыл бұрын
Thanks for the videos! Any tips for knuckle heads like me that had a cable untwist while working and not sure how many turns to put back? Thanks
Пікірлер: 139