Tip for anyone doing this, if you see a little bubble that you can’t work out/too late to, just make a SMALL even slit/cut in it, then squeegee it flat.
@MiddyBlue65
Жыл бұрын
That was Beautiful. Doing mine today. Waiting for the sun to go down. Thank you very much. Great tips as well. 🌹
@joerossi9536
5 жыл бұрын
Spray the hood before installing then wipe it down don’t wet the hell out of the sticker try to push all the water out no just no
@ChrisJ-mf7cj
2 жыл бұрын
Jealous of your skills man. You make it look so easy to do, but I know it’s not. Can’t tell you how many times I’ve left tiny bubbles and small creases. Looks amazing bro.
@stevenfreitas8775
6 жыл бұрын
Great install video. Gonna do my GT this weekend.
@billdonohue2389
2 жыл бұрын
Man I wish you were closer to me. Good job.
@gregorystancer9439
4 жыл бұрын
A couple things. I cant figure out, why he keeps spraying the back of the decal paper and when he started the decal why he was holding it up in the air to spray the decal. He came close messing up the decal with the wind.
@blessed_bk1145
2 жыл бұрын
How wide ??
@jessiejames7051
3 жыл бұрын
Looks really good I wish you talked I had to turn on sub titles it couldn't pick you up sometimes lol but yeah your good at it just don't be shy
@monstersdoexist
3 ай бұрын
Next, get a nice Spoiler installed on the rear of that trunk.
@mr.asiandefault
3 жыл бұрын
what measurement did you use for your stripes? inches and length?
@DavyDave1313
6 жыл бұрын
How do you get it on those tiny areas where it curves?? Like on the front and back bumper that’s what I’m scared of. Like you’re done if you mess up lol
@AzAutoGraphics
6 жыл бұрын
Need to be cut in sections. The only way to get it to lay right on the bumpers.
@DavyDave1313
6 жыл бұрын
sounds complicated LOL :/ think I will just get it done professionally instead of risking messing it up
@flyguy1527
5 жыл бұрын
Or just stop at the front end of the hood like I plan to do.
@rodiperez7918
4 жыл бұрын
@@DavyDave1313 Do you know how much professionally it would cost
@DavyDave1313
4 жыл бұрын
Rodi Perez yeah it was like $600 plus they added some of their own material and made red pinstripes on the sides of the large main stripe. It’s sick
@ChickenboyOyOy
5 жыл бұрын
How much harder is it to do the top of the car? Would i need a step stool or anything?
@SSAuto-sz3dj
2 жыл бұрын
What was the liquid you were spraying at the end? In the pump. Just water?
@helixracing
2 жыл бұрын
THAT SHELBY IS A BEAST
@GrootsieTheDog
4 жыл бұрын
Are those stripes the glossy or the matte style. Can’t quite tell on the vid. Thanks!
@AzAutoGraphics
4 жыл бұрын
Gloss black stripes.
@bigsquatchsasfoot1964
2 жыл бұрын
Nice job brother 👍
@stevenlaubach5947
2 жыл бұрын
How durable are these stripes? Is there any problems when you wax the car on the decal edges? What about an automatic car wash brushes wiukd it hurt these stripes?
@AzAutoGraphics
6 жыл бұрын
We are located in Surprise Arizona
@MikeAndNary
6 жыл бұрын
Az Auto Graphics How much for a MACH 1 style cream colored stripe on a Crown Vic, I'm in Buckeye.
@Chrisleeturner1997
6 жыл бұрын
Where are you located at ??
@RagingBull721
2 жыл бұрын
How long did the stripes last?
@michaelcole3914
3 жыл бұрын
What do you charge to take some off and put some back on
@ponyboy5.0coyotewild63
4 жыл бұрын
Great job 👍🏻
@theil6
5 жыл бұрын
Great Video
@dannylin5980
5 жыл бұрын
hi! I love this video! I was wondering how you measure where to put the stripes on the exact spot/ like how do you measure the center point of the hood where you know its even?
@AzAutoGraphics
5 жыл бұрын
Once you find the center of the hood it makes centering the stripe a little easier.
@dannylin5980
5 жыл бұрын
@@AzAutoGraphics Cool! Oh Also! btw. I accidently hit something this tuesday night. Hit on the back rear right bumper. I was wondering what are some of the parts that are on the back side of the mustang? Like around the right bumper area? I'm just curious, my rear bumper got a little dinged out lol as in a little dis-placed just slightly. I hope i didn't damage anything INTERIOR.
@tigergirl2897
3 жыл бұрын
Where did u get those decals
@Ashraf.Altiee
3 жыл бұрын
i have the stickers but not the 3m can i use water on it and did it like you or not i want your advance please im scared to put water and soap like you can you help me with that 😩
@agentcatalan8454
5 жыл бұрын
Did you use a heat gun at all ?
@AzAutoGraphics
5 жыл бұрын
Only on the edges.
@AnythingOnXpert
6 жыл бұрын
Just spraying water ? Or shampoo + water
@AzAutoGraphics
6 жыл бұрын
Yeah just water with very little baby shampoo and iso alcohol for the installation fluid. The alcohol is optional. Its for speeding up the drying process
@williamdelapena1121
4 жыл бұрын
I've done this a few times. It's stressful af👍
@mitchmadness4376
Жыл бұрын
Thanks !
@sweetbrandigirl
6 жыл бұрын
Where are you located at ? How much do you charge to do a car ?
@SimirJohnson
5 жыл бұрын
What did you do at the edge/end of the hood....does the graphic get folded under? Looks awesome BTW
@AzAutoGraphics
5 жыл бұрын
Yes, exactly.
@EnseignesPontiac-im6nr
Жыл бұрын
if you would use rapid tac you would not have this bubble problem and no streak of soap residue
Пікірлер: 55