Thanks much. Picking up fishing again after 40 years. Much easier than I recall! Cheers.
@chaleys8089
18 күн бұрын
It’s because you have more patience now 😉🤙
@kylehowell4054
2 жыл бұрын
Great video, simple good explanation, point taken!
@snakesgunsandbikes
6 ай бұрын
Thanks my man. Going after big river cats and never used braid before.
@rasmushansen9879
Жыл бұрын
Thank you! I'll try it out on what's hopefully gonna be a huge halibut this weekend 😊
@MoneyslifeTV
Ай бұрын
Thanks man hell yeah
@dubbleportion
10 ай бұрын
Awesome, I'm setting up for a San Diego BFT run looking for the best strongest knot I'm going to use the dubble Palomar tied to a 60-second Bimini iv been resourcing knots for 2 maybe 3 months I have tried ALOT OK knots I think now I can go after the big ones and have confidence in my tackle aet ups tx
@a.p.mexico1071
2 жыл бұрын
Hi, excellent video. I need your opinion. I don't trust too much in knots (braid to mono or fluorocarbon leader) for Bottom Fishing or Jigging (over 150 ft depth) and Trolling. For this reason I prefer a swivel but I found a typical problem with this type of rig, the risk to damage the top tip of the rod. So I bought a package multicolor small rubber balls, drilled a little hole side to side, introduce the braid line, usually 65lb-80lb and use 1 red bead and tie the braid to the swivel. In the other side of the swivel I can change my leaders anytime (80lb mono) without worry about damage the top tip or guides of the rod. The small rubber ball protect the top tip and the red bead protect the rubber ball from swivel, a red bead connected with the swivel directly can be broked and the swivel can cause damage to the fishing guides. My reels are Shimano Torium 16 HG and 20 Hg (jigging and bottom fishing), Shimano Tyrnos 16II Double Speed (Bottom fishing and Trolling) and I have a brand new in box another Shimano Tyrnos 30II Double Speed that I'm planning to use with the same rig for trolling mainly. For live or chunck bait I'm using a Shimano Thunnus CI4 12000. Thanks for any comment or advice!
@SouthFloridaSaltwaterFishing
2 жыл бұрын
Thanks for your input. Yes... guides can be damaged by braid.... it will form a groove in the guide that will cut the line .. Your method of adding beads may work. But I suggest finding a rod with stainless steel guides if you're concerned about this issue. I have many episodes with planer trolling about using roller guides and slow pitch jigging in which the guides are fabricated to withstand the heat of negative pressure. Ultimately it's a process of trial and error, but that's what I'm here for. Tight lines
@psystealth
7 ай бұрын
Great stuff will try it
@jon-yb9fr
5 ай бұрын
Mint knot 😮
@johnbruner9684
3 жыл бұрын
Thanks Heath for the great knot, will give it a try.
@SouthFloridaSaltwaterFishing
3 жыл бұрын
Hi John, thanks a boat load for watching and leaving some excellent feedback. I truly appreciate hearing from you and your support for the channel. Couldn't do this without you. This is definitely a solid knot for braid to tackle. If tied properly, it's virtually indestructible and fail proof. Thanks again for everything. Good luck out there. Tight lines & take care ;)
@johnbruner9684
3 жыл бұрын
Just picked up a Penn Battle lll 6000, spooled up 50lbs braid to a 300lbs swivel with this knot, can’t wait to try it out. Awesome knot, thanks again for the video!
@SouthFloridaSaltwaterFishing
3 жыл бұрын
Hi John, Thanks for having faith in the info. You won't be disappointed with the outcome... and you won't lose hardware. Tight lines & take care ;)
@AdventureswithaaronB
3 жыл бұрын
I first learned it for bass fishing, it is very good. Keep up the great content
@SouthFloridaSaltwaterFishing
3 жыл бұрын
Hi Alex, Thanks a million for watching and always being here and supporting the channel. Palomar was the first fishing knot I learned, used it for everything... As I gained experience, I taught myself to switch up knots for what I was using them for, which is not only connection, but shock absorbency, or lack there of. Regardless, for braid to hardware, if tied correctly, this is fail proof. I use it for planner trolling and deep dropping, two methods that put a tremendous amount of strain on the non-streching connection. Thanks again for everything. Tight lines & take care ;)
@krzyhrsefla
3 жыл бұрын
Great knot!!! I usually go with a uni-knot simply because that is what I was taught. Braid is an interesting material to work with compared to fluoro and mono. Heck, I don’t think it existed when I was a kid fishing with my Dad. All I remember was mono. I really like the idea of having two loops and double the strength at the swivel. This was another good share on your part. Thank you.
@SouthFloridaSaltwaterFishing
3 жыл бұрын
Thanks a boat load for watching and always being here. I truly appreciate your support and sharing your experiences. I grew up fishing too with my Grandparents and dad... But didn't know about braid until the mid 90's... However, it was invented in 1953... just not used on a wide scale format like today. Double or triple palomar is definitely a solid knot for braid.. there's many other knots that give a great connection (cat's paw) but if I'm thinking about average Joe angler, and not trying to complicate things... I'll stick with the Palomar... Also, it's what I use when I'm out there, so no need to be misleading. Glad you took away some helpful info. Thanks again for everything. Tight lines & take care ;)
@1539Mickey
3 жыл бұрын
Hi Heath, I use that Double Palomar a lot and it works great. Sometimes I even tie a Triple Palomar. That braided line can be slippery. Hope everyone's well. "See" you on Sunday. Take care, Mickey
@SouthFloridaSaltwaterFishing
3 жыл бұрын
Hi Mickey, thanks for watching and always being here. Hope you are settling in to your new home well. I learned the palomar when I was like 5 years old... used to be the only knot I knew. When I started planer trolling and switched from mono to braid, I found out the hard way, and learned through failure, about this connection and using a virtually indestructible swivel. My issue with braid, is cutting myself on it. Thanks again for everything. Hope all is well with you and the family. See you Sunday. Take care :)
@1539Mickey
3 жыл бұрын
Hi Heath, "See" you on Sunday. I'm glad the family is well. Things are starting to get normal here. Stay well and good luck, Mickey
@Humanist1971
Жыл бұрын
Love you dear brother Heath 🤗
@ronmelton9706
3 жыл бұрын
Always look forward to your tutorials... thanks. I finally have the haywire twist down pat.
@SouthFloridaSaltwaterFishing
3 жыл бұрын
Thanks a million for watching and sharing you success. Honestly, I'm horrible at tying a haywire twist without the tool. So, thankfully it exists. Totally awesome you've got it down and can confidently add it to your repertoire. Thanks again for always being here and supporting the channel. I truly appreciate it. Couldn't do it without you. Tight lines & take care ;)
@ckaz2806
3 жыл бұрын
Great video and GREAT information Heath!
@SouthFloridaSaltwaterFishing
3 жыл бұрын
Thanks a million for watching and always being here to support the channel. I truly appreciate it and couldn't do it without you. Thanks again. Tight lines & take care ;)
@miketexas4549
3 жыл бұрын
Hey Captain Heath! Which planer technique do you use? Are you putting the planer directly to your braid mainline, or are you tying that planer braid line to a stern cleat and then sending your main line down with double snap swivel/rubber band? Tight lines from Hawaii 🤙🏽
@SouthFloridaSaltwaterFishing
3 жыл бұрын
Thanks a million for watching and asking a great question. I use the inline (old school) method. I don't use the quick release method. I love the hand lining man vs. fish aspect of planer trolling this way. Hope this helps. Always great to hear from you and have your support for the channel. Tight lines & take care ;)
@bigpappi357
2 жыл бұрын
You were so much help thank you so much
@SouthFloridaSaltwaterFishing
2 жыл бұрын
Thanks a million for watching and leaving some great feedback. I truly and sincerely appreciate it and your support for the channel. Thanks again. Helping out and sharing information as simply and down to earth as I possibly can so that everyone can get out there and have some fun. Tight lines & take care ;)
@josecapablanca2351
3 жыл бұрын
Thank you Heath for another excellent tutorial into the rigging of planer trolling and knots to use. I always appreciate the honest simplicity of your presentations. Keep up the good work and I'm hoping for the winds and ocean to lay down this weekend to get out and try this knot. Thanks tight lines🎣🎣
@SouthFloridaSaltwaterFishing
3 жыл бұрын
Thanks a million for watching and leaving some excellent feedback. Always a true pleasure hearing from you and having your support for the channel. Couldn't do this without you. As the creator of this channel, I feel it's most important to convey what I'm doing and how I'm doing it, in a honest and simple manner. That way anyone who is interested in learning or growing, can get in on the fun. Don't think the winds are gonna let up this weekend, hopefully next week. Good news, is spring is right around the corner, southeast winds are coming.... That means Mahi. Thanks again for everything. Tight lines & take care ;)
@dewaynemeyer1446
4 ай бұрын
Would you use it on tuna? Thank you
@SouthFloridaSaltwaterFishing
4 ай бұрын
Definitely
@dewaynemeyer1446
4 ай бұрын
Thanks again it seams small for big ones, most people like the uni double rape , I guess it's time to do some testing, good fishing 🎣... im" A' dreaming Islander lol ..
@mudshark412
3 жыл бұрын
One for the Algorithm Thank You
@SouthFloridaSaltwaterFishing
3 жыл бұрын
Thanks a million for watching and leaving some great feedback... If only the YT algorithm would recognize my existence, then we'd be on the same wavelength :)))) Always great to hear from you and have your support for the channel. Makes all the endless effort and sleepless nights 100% worthwhile. Thanks again. Tight lines & take care ;)
@HELENGodLoves
Ай бұрын
I don't think pier fishing I'll be catching anything that needs this string of line quite yet but it's a bad A knot🎉🎉🎉 Hey... why do fish care if the "tag" line is cut? I've always done that but only cuz it seems required 🤔
@pescamarescaptainalex4457
3 жыл бұрын
Great video brother
@SouthFloridaSaltwaterFishing
3 жыл бұрын
Hi Alex, Thanks a million for watching. Are you still captaining the 65' Viking? Looked like fun. Spring is around the corner... Mahi time :))))
@pescamarescaptainalex4457
3 жыл бұрын
@@SouthFloridaSaltwaterFishing this is the last weekend my friend coming back next week but looks like this weekend no fishing trips set up yet
@mahenkariyakarawana2189
3 жыл бұрын
I would thumbs up 100 times if I could
@mahenkariyakarawana2189
3 жыл бұрын
should’ve listened to the captain
@SouthFloridaSaltwaterFishing
3 жыл бұрын
Thanks a million for watching leaving some great feedback. I truly and sincerely appreciate it and your support for the channel. Couldn't do this without you. Thanks again. Tight lines & take care ;)
@qurtoba
2 жыл бұрын
way much easier than FG knot, my question will it work with Japanese small braid line Pe 0.4 to Pe 1 ?
@SouthFloridaSaltwaterFishing
2 жыл бұрын
Yes it will work fine with the thinner linee
@RM-ub1xd
Ай бұрын
Will this work for musky bank fishing?
@SouthFloridaSaltwaterFishing
Ай бұрын
It should
@ktmdays
9 ай бұрын
Will that knot work with mono to
@SouthFloridaSaltwaterFishing
9 ай бұрын
Yes it will
@luckyguliver
3 жыл бұрын
I lost big fish today due to poor knot. Time to change my tying habits ;) btw would this know work with FC?
@SouthFloridaSaltwaterFishing
3 жыл бұрын
Thanks a million for watching and asking a great question. Yes, this knot will work with fluorocarbon. Don't feel left out, the number one cause of lost catches, is knot failure. Even if the knot is tied perfect, sometimes, for unknown reasons, they come undone. To help you out. Here's a link of an episode I made on the top 5 most common fishing knot and how to tie them: kzitem.info/news/bejne/u6t31WWjf4KAlIY Hopefully this will be helpful. Thanks again for your support of the channel. Good luck in your fishing adventures. Tight lines & take care ;)
@leejohnson7976
3 жыл бұрын
Take a lighter and burn the end of the tag to create a small nub for added protection against slipping.
@SouthFloridaSaltwaterFishing
3 жыл бұрын
Thanks a million for watching and sharing some added info. I truly appreciate it and the support for the channel. Tight lines & take care ;)
@PetClipdog
3 жыл бұрын
Thank you Teacher. What rod do you recommended me for 50 pounds reel to Bottom fish and trolling. Thank you
@SouthFloridaSaltwaterFishing
3 жыл бұрын
Thanks a million for watching and asking a great. I'm going to assume you are referencing a 50 wide conventional style reel. If I'm correct, first I wouldn't recommend that for bottom fishing, but for trolling it's great. Line rating is simple, If it's a 50w then you'll want to put 50 pound test on it. However, the number system on reels can be confusing, and I could be interpreting what reel you have incorrectly. If you tell me what manufacturer and model number the reel is, I could probably lead you in a better direction. you can also look through the owner's manual for the suggested line rating and capacities. Always great to hear from you and have your support for the channel. I truly appreciate it. Tight lines & take care ;)
@PetClipdog
3 жыл бұрын
@@SouthFloridaSaltwaterFishing thank you, Teacher. I made a mistake it is 40 pound reel. I bought a a Shimano speedmaster 25 ii and want to set a brake at 17 pounds drag. I want a rod not very high priced. What is your recommendation. Thank you.
@SouthFloridaSaltwaterFishing
3 жыл бұрын
@@PetClipdog So I did some research on your reel... Very nice choice. Personally, I would spool it with 20 pound test monofilament... If you're going to be doing both bottom fishing and trolling. If you're looking for a good rod, with great shock absorbency and a lifetime warranty, I'd go with a 7' star rod form the handcrafted series. Here's the link to the rod so you can check it out: www.starfishingtackle.com/handcrafted-boat-conventional Hope this helps. Tight lines & take care ;)
@PetClipdog
3 жыл бұрын
@@SouthFloridaSaltwaterFishing thank you, Teacher You are always helping me. Thank you!!!
@KosherXY
3 жыл бұрын
lost too many planers using single line knots, switched to the cats paw (with bimini) and never lost another
@SouthFloridaSaltwaterFishing
3 жыл бұрын
Thanks a million for watching and sharing your knowledge and info. I truly appreciate it and your support for the channel. Always great to hear different perspectives and tactics on a similar subject. Keeps it fresh & interesting. Thanks again. Tight lines & take care ;)
@michaellibre3364
2 жыл бұрын
how to tie100lb leader line to swivel i want to learn to how to tie the big leader thank you for your answer brother and GOD BLSSS 🎣🎣🎣🐟🐟🐟♥️
@SouthFloridaSaltwaterFishing
2 жыл бұрын
100 lb test you use a crimp... I don't use knots for line heavier than 60 lb test
@vinceyelets2144
2 жыл бұрын
2:34
@Nonstophunting12
2 жыл бұрын
💚💚💯💯💯💚
@royceloi676
2 жыл бұрын
I lost so many big fish using the single palomar knot.
@SouthFloridaSaltwaterFishing
2 жыл бұрын
Thanks a million for watching and sharing your experience. This happens to be the only application where I use a Palomar knot and specifically because there is so much pressure put on it by the planer I double up that first overhand knot and using braid is perfect for this application because braid only tightens down on itself like a Chinese finger trap. Other than that I don't really use a Palomar knot especially tied with monofilament. Thanks again for your support of the channel I truly and sincerely appreciate it. Tight lines & take care ;)
@mypotatomunchkin
Жыл бұрын
The slack in my loop never tightens up!!! Argh
@SouthFloridaSaltwaterFishing
Жыл бұрын
Try pulling on the tag by wrapping it around something like the handle of a pair pliers... it'll Tighten down
@mypotatomunchkin
Жыл бұрын
Maybe its my line, 200- 250 test on a downrigger, hanging 12-15 lb balls Maybe i just needed a break, ill try again today. The single polimar knot seemed pretty strong.
Пікірлер: 72