Folks, you are damn fortunate to have Joe Pie as a fan. You really tweaked his interest. He told me to be prepared to smile. New Subscriber to a great channel . Wakodahatchee Chris🥰😋🖐🖖👌👍
@michelledaviesart
Ай бұрын
Thank you so much for you watching, lovely comment and thank you for subscribing 🌞
@Preso58
2 ай бұрын
What a nice example of this engine. I have the non reversing version and it easily drove a propeller twice that diameter, in the water and pushing a 1 metre long scale model of the steam tug, Cervia. Nice to see my sticker up on the wall too. Thanks.
@modelengineeringadventures
2 ай бұрын
Thanks Mark its been a 4 month journey but the end result is great...looking forward to your detailed build.
@donnowakowski4224
Ай бұрын
Joe Pie mentioned your channel. Glad he did. I subscribed.
@michelledaviesart
Ай бұрын
Thank you for watching/ subscribing 😊
@modellingmark
2 ай бұрын
She is a beauty, and the wooden base sets her off a treat! I'm with John, I'd love to see some build videos too.
@michelledaviesart
2 ай бұрын
Thank you Mark for watching. On his case for longer build videos 😊
@modelengineeringadventures
2 ай бұрын
ok will have a look at the next build
@1227air500
2 ай бұрын
Thank you for showing us the engine and the rest. The spontaneous enthusiasm is great..
@mechaform
Ай бұрын
(Knocks on door) “Joe sent me!”
@michelledaviesart
Ай бұрын
Thank you for watching 😊
@Steviegtr52
2 ай бұрын
Something I know little about is Steam. It's amazing to watch all those mechanical parts moving. Well done. Steve.
@modelengineeringadventures
2 ай бұрын
cheers Steve
@jeffdayman8183
2 ай бұрын
Very nice engine and boiler! Thanks for sharing it.
@christopher3048
Ай бұрын
Joe Pie sent me here, looking good!
@michelledaviesart
Ай бұрын
Thank you for watching and subscribing 😊
@thefirstcalled
2 ай бұрын
Hello from "The Colonies" (Canada eh?) Wowsers! I could watch that little engine all day long... but it is the sound of it which is especially appealing to my existence! Thank you so very much for sharing!
@modelengineeringadventures
2 ай бұрын
Thank you very much
@joepie221
Ай бұрын
Nice model. Very similar to the D10 twin. Subbed too. :)
@modelengineeringadventures
Ай бұрын
Joe, you have made my day....most of what I have learned (I'm not formally trained as an engineer) is from guys like you, and you are certainly a top teacher ...all the best from a cousin across the pond. ;))
@joepie221
Ай бұрын
@@modelengineeringadventures Thank you sir.
@raymondhorvatin1050
Ай бұрын
Joe Pie recommended your channel nice boiler and stuart
@michelledaviesart
Ай бұрын
Thank you 😊
@dennythomas8887
Ай бұрын
Beautiful work and a nice set up with the boiler. Joe Pie said I should check out your channel. I'm glad I did. It was a great recommendation. I subbed! 👍😃
@grahamdavies22
Ай бұрын
Yeah, ditto.. 👍
@michelledaviesart
Ай бұрын
Thank you for watching and subscribing 😊
@MultiTiffany2
Ай бұрын
Joe Pie said it was a must see site.
@michelledaviesart
26 күн бұрын
Thank you for watching 😊
@johnkelly7264
2 ай бұрын
Would REALLY like to see longer build videos please.
@modelengineeringadventures
2 ай бұрын
hi John i will work on that for you
@michelledaviesart
2 ай бұрын
Thank you for watching John, on his case for longer build videos 😊
@petert9749
Ай бұрын
i subscribed because Joe Pie said, and we always do what Joe Pie sez. More seriously, anyone who can 'do' an engine like that is likely to enjoy 'Clickspring'. i suggested it to Joe; don't know if he ever got time. Thanks for sharing.
@michelledaviesart
Ай бұрын
Thank you so much. We have watched clickspring and he is another brilliant channel like Joe’s to learn from 😁
@michaelleskoske7723
Ай бұрын
Just watched my first video of yours. I enjoyed it. I will watch more as I subscribed to it. Joe Pie turned me on to this channel.
@michelledaviesart
Ай бұрын
Thank you for watching and subscribing 😊
@teescottageguyproductions
2 ай бұрын
Very very nice engine!! Beautifully made 👏 👏 🔧
@paulgar8
Ай бұрын
Thank You
@michelledaviesart
Ай бұрын
Thank you 😊
@paulgentry790
Ай бұрын
More volume please
@watchfordpilot
2 ай бұрын
Great tour, lovely engine and set up, thanks.
@p.m3735
2 ай бұрын
Very nice little engine 👌
@TheRecreationalMachinist
Ай бұрын
@MrFactotum sent me. Always nice to find another UK channel. Keep up the good work 👍 🇬🇧
@michelledaviesart
Ай бұрын
Thank you for watching, good to know their is a community out there 😊
@mrc1539
Ай бұрын
New subscriber compliments of Joe Pie 😉 !
@michelledaviesart
Ай бұрын
Thank you 😊
@lotus7even
2 ай бұрын
That is wonderful 👍
@modelengineeringadventures
2 ай бұрын
Thank you I'm very pleased with it
@TheKnacklersWorkshop
2 ай бұрын
Hello Guy's, That is a really cool engine... I like how you're using the and independent boiler to run it. Take care. Paul,,
@modelengineeringadventures
2 ай бұрын
Thanks paul difficult build but worth it
@michelledaviesart
2 ай бұрын
Thank you for taking the time to watch Paul 😊
@KevinWoodsWorkshop
2 ай бұрын
Excellent job, runs brilliantly.
@MrFactotum
Ай бұрын
Hi there Great little engine with many hours spent building i suspect👍👍👍👍 Bumped in to you from Rusty's channel. so sub'd and bell'd you and will take a look at what you get up to, regards Kev
@Mr7yhnmki8
Ай бұрын
Joepie221 sent me. Subscribed.
@michelledaviesart
Ай бұрын
Thank you for watching and subscribing 😊
@jasonclark5484
2 ай бұрын
Wonderful set up, Thanks for sharing. Is the Economizer from a kit and what company or did you scrath build it?
@modelengineeringadventures
2 ай бұрын
Keith appleton has a video on how to build one
@jasonclark5484
2 ай бұрын
Thank you for the info and quick reply.@@modelengineeringadventures
@andybrookes-wilde3820
2 ай бұрын
Nice setup
@christopherbrighty2898
Ай бұрын
Joe Pie recommended you
@michelledaviesart
Ай бұрын
Thank you watching 😊
@francometalo
2 ай бұрын
❤❤👍👍👌👌💪💪 trop bien.
@michelledaviesart
2 ай бұрын
Thank you for watching 🥰
@paulrayner4514
2 ай бұрын
love the mounting. Are you going to clad the cylinder?
@modelengineeringadventures
2 ай бұрын
it runs so well and i like it the raw the way it is...what do you think?
@paulrayner4514
2 ай бұрын
It would be nice with some cladding on and a bit of ornamental brass banding to match your economiser, It's a bit of a faff to fit especially round the exhaust ports and the drain cock's but it's worth it. Have a look online and see what others have done, it may make up your mind.
@modelengineeringadventures
2 ай бұрын
ok i will have a go...
@paulrayner4514
2 ай бұрын
have a look how others have done it, Keith has done a few bits on it. cardboard, a strip of cloth and super glue are your friends@@modelengineeringadventures
@modelengineeringadventures
2 ай бұрын
@@paulrayner4514 i will put it on the to do list
@GrimmJaw496
2 ай бұрын
nice, sounds like a sewing machine.
@modelengineeringadventures
2 ай бұрын
that's a lovely thing to post and makes all the work worthwhile
@mrayco
Ай бұрын
Joe pie ❤❤❤❤ t h a n k y o u
@michelledaviesart
Ай бұрын
Thank you for watching 😊
@mrayco
Ай бұрын
@@michelledaviesart we are waiting for tutorial content thank you
@modelengineeringadventures
Ай бұрын
we will do some more videos on making our model but i am not a teacher, we have joe pie for that
Пікірлер: 79