If this helps you, please leave a like or dislike and a comment. It will get this video out there to help others with this common problem.
@rix480
2 жыл бұрын
Just spent the last 40 min trying to find that little end piece after the spring launched it into the grass, but I found it thanks to this video giving me a good view of it. Be careful to cover the end with your hand while prying it off!
@RippSnortin
2 жыл бұрын
Yes, and wear eye protection.
@crouchingpantherhiddendrag586
2 жыл бұрын
Thank you so much! I freaked when I got some BB's stuck in my mag, but you had me fixing them in less than 5 minutes.
@RippSnortin
2 жыл бұрын
Glad it worked.
@Uniox2008
Жыл бұрын
Thank you so much it was my first using it and I jammed it. I was panicking but then I found this majestic video. Your a lifesaver bro.
@RippSnortin
Жыл бұрын
Glad it helped.
@thebutcher1613
2 жыл бұрын
It’s happened to me twice today..and I came back here to watch your video again..very helpful, it does the trick no doubt
@vlo9079
2 жыл бұрын
Thank you!!! I have 2 magazines with BBs stuck in the springs
@LAT-qk3vj
3 жыл бұрын
I have had this exact same problem happen to me twice with my DPMS Panther. Good video.
@rottsrool
Жыл бұрын
Brilliant !! I got two bb’s jammed and spent 20 minutes trying to dig it out until I found your great video. Thanks so much.
@RippSnortin
Жыл бұрын
Glad it helped.
@kingklp0442
2 жыл бұрын
Omg Thank you I was so stumped you made this so easy thank you 🙏
@saint138
2 жыл бұрын
Thank you sooo much for taking the time to make this video I started freaking out when I got some stuck 😂I was so relieved after I watched this video I thought I ruined it 😭
@RippSnortin
2 жыл бұрын
Glad it helpped.
@mannphan7691
10 ай бұрын
Thank you for making this video. Learned so much about the mag well done.
@RippSnortin
10 ай бұрын
Thanks for watching
@imkona87
2 жыл бұрын
Wow, so simple. Thank you very much.
@somatic77
2 жыл бұрын
You're a lifesaver. Thank you.
@gregreiss9095
Жыл бұрын
DUDE!!! I wish I would have seen this before I totally wrecked another on and had to but a replacement !! Thank you
@glenntrujillo4891
2 жыл бұрын
Hey I just wanted to let you know that you saved me a lot of time and money cuz I was so frustrated that I couldn't get that baby out of there I was going to go actually get on Amazon and or something and buy me another one. Thank you so much your video made a huge difference in my life and I surely appreciate it
@RippSnortin
2 жыл бұрын
Cool, glad it helpped.
@plaguedoctor3806
3 жыл бұрын
Thanks this really helped me I was almost about to return my R1 because of this issue but not I can keep it thanks alot
@RippSnortin
3 жыл бұрын
You're welcome. Very cool air gun.
@ivanestrada3079
7 ай бұрын
Video still helping till this day thank you brother
@RippSnortin
7 ай бұрын
Thanks for the comment.
@Matty_Joe
2 жыл бұрын
I did this before I watched the video, but didn't know how to take it out. I had my Father return it because the buffer tube spring got stuck. We worked on it, and after the first shot, it broke again. Now I have a new one, and a new magazine. If a BB gets stuck in this one, I will remember how to fix it. Thank you.
@b.p.stimemachines2327
3 жыл бұрын
Thank you very much I got slightly aggressive and knocked the tab out of the detent and put 5 or 6 BBs into the spring and was so pissed because they he mags are not cheap, I though those were roll pins or something other than a removable screw god am I glad that cooler heads prevailed and I didn’t try and take them out and destroy my spring instead I saw your video. In all honesty though the reloaded needs a redesign because it it’s erratic behavior and that it probably has caused a bunch of folks to replace magazines unnecessarily, yes it works but it is back to straws for me I have never had any problems just pouring them in with a straw and it is almost as quick especially when the reloader has absolutely no qualms about filling your spring up with ammo lol. Thanks again
@RippSnortin
3 жыл бұрын
Glad it helped.
@codypearce2287
2 жыл бұрын
This video saved my day I used my screwdriver to push the spring most of the way in made it way easy
@RippSnortin
2 жыл бұрын
Good work. Glad it helped.
@goran4204
Жыл бұрын
I had this problem for months and i never even wanted to serch for te solution cuz I said to myself it would take lots of time and it was never a priority, tomorrow in the paraguayan army we have an event "Soldier for a day" ist for kids and my officers asked for me to bring my replica. This video saved me, thanks and greetings from Paraguay 🇵🇾👍🏼
@RippSnortin
Жыл бұрын
Glad it helped. Waving a hand.
@t.j.furness
10 ай бұрын
Thanks man, I seen that little piece at the bottom and figured that was where the spring comes out, but thought I'd have to do more (like split the damn magazine hah) to get it out. I shot my first mag and was too damn excited to shoot another one and ...it happened hahah. I was tryin' to spread the spring and extract the bbs with a damn magnet outta where they went in. Thanks again.
@RippSnortin
10 ай бұрын
Glad it was a help
@brorjordas1979
2 жыл бұрын
First off.. "You do not put the BBs into the spring! The BBs oughta be on top of the follower!" 🤣 ..Just somehow I have never gotten the idea to try fill my DPMS mag's spring with BBs... As second.. This is the way you do it.👍🏻👍🏻 PS No idea though how hard it has been for many to see that screw head right there holding the buttplate for the spring..
@chriswatson5962
19 күн бұрын
Thank You! Gun comes with horrible instructions and I did this first time loading and I was definitely panicking!
@RippSnortin
19 күн бұрын
I think it happens to everyone. This is my most popular video. Glad it helped.
@johnniehh
Жыл бұрын
Excellent!!!! You made it soooo easy, thanks bro!
@RippSnortin
Жыл бұрын
Glad it helped.
@kmc2227
2 жыл бұрын
Thank you!!! Saved me a lot of time and worry!!!
@RippSnortin
2 жыл бұрын
Glad it helpped.
@mememine69
2 жыл бұрын
Had to do the same after I got 6 BBs stuck in my AK-1. Thanks for the tip, it worked.
@louiswhetsell1144
2 жыл бұрын
How did you get the spring out for the ak
@KMDecided
2 жыл бұрын
How do you get the spring out the AK-1?
@JesseManpink
2 жыл бұрын
Bro thank you so much. This legit just happened to me and I could t figure it out 👍👍👍
@matth4221
11 ай бұрын
Thanks a lot. I had both magazines of mine with bbs in the spring and was panicking. Thought i had to buy a new one
@RippSnortin
11 ай бұрын
Glad it helped.
@ingreible66
Жыл бұрын
Thanks for the video friend. The Crosman R1 will arrive in a few days and it is good to have solutions to possible problems. Greetings from Barcelona (Spain).
@RippSnortin
Жыл бұрын
Thanks for watching. Enjoy your day.
@jipsiemune
Жыл бұрын
I will share this video with my son...thanks for the information ☕
@RippSnortin
Жыл бұрын
Hope it helps
@avgredditmod
2 жыл бұрын
thanks, just tried it and it works for that one dpms sbr air gun from amazon
@nighthawk7667
3 жыл бұрын
My buddy jammed the bb in the spring and now I know how to fix it, thank you. 😁👌🇺🇸
@RippSnortin
3 жыл бұрын
You're welcome. Go forth young man.
@knightrider3766
3 жыл бұрын
@@RippSnortin where did you buy your mag cover/ the green sleeve?
@RippSnortin
3 жыл бұрын
@@knightrider3766 got them on Amazon. Missouri Tactical Products LLC Pro Mag Assist
@knightrider3766
3 жыл бұрын
@@RippSnortin thankyou...about to press complete order....
@vladimirbartovic6013
2 жыл бұрын
Thank you very much : from me from Slovakia : thank you it is super!
@RippSnortin
2 жыл бұрын
Glad it helpped.
@tendraftsdeep
2 жыл бұрын
Wow! Thank you. Just got my gun yesterday and jammed BB's in the spring.
@RippSnortin
2 жыл бұрын
It happens. Glad it helpped and thanks for watching.
@tendraftsdeep
2 жыл бұрын
@@RippSnortin helped so much! I got the 300 round ordered. What a great BB gun! I got a single shot Gamo that's Awesome but this full auto is greatness
@johnnybbgunner2136
2 жыл бұрын
I have 2 rifles and 3 magazines with one broken due to a BB stuck in spring. Now I can fix it properly.👍
@jaimegarza5182
Жыл бұрын
Awesome information, thank you for sharing.
@RippSnortin
Жыл бұрын
Glad it helpped
@amg6536
2 жыл бұрын
Best KZitem Channel thank you 😄
@RippSnortin
2 жыл бұрын
Glad it helpped.
@sirgalahad3574
2 жыл бұрын
Good video. My very first load resulted in a bb in there. All good now.
@RippSnortin
2 жыл бұрын
Yeah. Happened to me pretty fast too. I was even aware of the possibility.
@LiamDavidsonYT
2 жыл бұрын
THANK YOU!!! Exactly what I needed lol
@joshualuk
Жыл бұрын
I panicked, ruined the spring luckily crossman sent me a new one for free
@RippSnortin
Жыл бұрын
I imagine they send a lot of those springs out.
@Jondster
Жыл бұрын
Damn ! I wish I saw this. I ended up picking the 2 BBs out with toothpicks
@RippSnortin
Жыл бұрын
As long as it worked ,you were successful.
@3dgrandson169
2 жыл бұрын
Thanks my guy , I just fixed my supposed to be brand new one
@WorkMateGuy
2 жыл бұрын
Thanks for the video! Have you by chance disassembled the trigger mechanism. Mine has a very heavy pull, even with lubrication, and I would like to adjust it lighter.
@jacobschulte9861
2 жыл бұрын
So easy, Thank You!
@ronmoore8732
2 жыл бұрын
Thank you thank you great video
@damiangerardo3992
2 жыл бұрын
Bro I hope everyday for you is very good thank you for helping me
@RippSnortin
2 жыл бұрын
Glad it worked.
@justyouraveragetroll6858
Жыл бұрын
Thank you so much this helped a lot
@RippSnortin
Жыл бұрын
Glad it worked
@Guyinthecoffeeshop
3 жыл бұрын
Thanks man this save my life
@RippSnortin
3 жыл бұрын
Glad it helped.
@callmehk796
Жыл бұрын
Thank you. Very helpful
@RippSnortin
Жыл бұрын
Glad it helped.
@AK-Boy86
Жыл бұрын
Many thanks! i had this problem
@RippSnortin
Жыл бұрын
Glad it helped.
@meawreg
2 жыл бұрын
I was halfway about to destroy this damn magazine, thanks man!
@ddawg0863
2 жыл бұрын
thanks, worked for me.
@sharkzillaxxshark6539
Жыл бұрын
This helped a lot
@RippSnortin
Жыл бұрын
Thanks for the comment
@feralforest
3 жыл бұрын
Quite helpful. Thank you
@RippSnortin
3 жыл бұрын
You're welcome
@user-ej6un3qu4q
3 жыл бұрын
Do not forget to always activate the Arabic language. Your channel is very wonderful and distinctive. I am from Egypt. I follow you. I wish you good luck and thank you 💟💟💟
@nicholasgavin7821
Жыл бұрын
Appreciate it so much ❤
@RippSnortin
Жыл бұрын
Glad it helped.
@catfish4680
2 жыл бұрын
Great Video. Thanks a lot .
@RippSnortin
2 жыл бұрын
Thanks for watching.
@davidstancil8479
3 жыл бұрын
Thank you, thank you, thank you!
@jerrysullivan7223
2 жыл бұрын
I done it twice bb stuck in spring used a eye glass very small screw driver popped it right out the loader hole just be careful it will come out or do what this man showed .
@crp2008
2 жыл бұрын
Many thanks!
@frankmaze1976
2 жыл бұрын
The magazine protector is on backwards lol. But that is some helpful info about how to remove the spring.
@RippSnortin
2 жыл бұрын
I always wondered, but there were no instructions.
@NPyrotec
13 күн бұрын
Thank you man!
@RippSnortin
13 күн бұрын
Glad it helped
@TheHeat55
2 жыл бұрын
Nice to know. I bent a spring trying to fish a bb out :-)
@greene6826
2 жыл бұрын
legend
@andrzejsitkiewicz8180
2 жыл бұрын
wow big thanks
@blagdaross5953
Жыл бұрын
wish i would have known that yesterday. just got the dpms sbr and first time loading it got a bb stuck in the spring. pulled the top of the spring down passed the hole, then used another tweezer to push the bb through the spring to the hole. was very annoying to do it that way.
@RippSnortin
Жыл бұрын
At least you got it out without mangling the spring.
@paulpitchlynn9920
2 жыл бұрын
I slipped a nail inside the spring to slide the spring back into the clip. Worked great with my thumb nail once it got close to the clip. I think the nail is called a 16 penny nail.
@RippSnortin
2 жыл бұрын
Nailed it!
@mateko2001
2 жыл бұрын
Thank you so much
@RippSnortin
2 жыл бұрын
Glad it helped.
@jdcarsandstuff9540
10 ай бұрын
Thanks so much!!!
@RippSnortin
10 ай бұрын
You're welcome
@slim420MM
3 жыл бұрын
Thanks!
@frakkintoaster
2 жыл бұрын
Thank you.
@RippSnortin
2 жыл бұрын
Glad it helpped.
@macmcellheney4351
3 жыл бұрын
Thank You
@pedrohensley6639
10 ай бұрын
Bro, thank you so much
@RippSnortin
10 ай бұрын
Glad it worked for you.
@pedrohensley6639
10 ай бұрын
@@RippSnortin lol yeah I grabbed a pen and a sewing needle trying to get the bbs out of spring. It didn’t work. so then I seen your video and tried it and it worked perfectly.
@pedrohensley6639
10 ай бұрын
@@RippSnortin I got kind of scared. I thought I broke the magazine and thought I was going to have to buy another one. Thanks again bro.
@chadillacinc
Жыл бұрын
Question did you find a tiny little magnet in there when you took yours apart? I took. Ine apart carefully last night and now I have an extra part. It's a tiny, cylinder shaped magnet and I don't know if it was accidentally left in from manufacturing or if it's a really important piece
@RippSnortin
Жыл бұрын
Not that l noticed.
@vscolkitt
2 жыл бұрын
Who makes the protective mag covers? I thought you mentioned the bottom portion is angled to help stabilize the Rifle on a shooting bench?
@RippSnortin
2 жыл бұрын
Made by Missouri tactical got them on Amazon
@natalianowakowska4356
Жыл бұрын
thank you:)
@RippSnortin
Жыл бұрын
You bet. Glad it helped.
@Royal-rz6kx
2 жыл бұрын
Thanks
@favillaverde
8 ай бұрын
Man wish I found this yesterday, I destroyed my spring doing it the caveman method lol
@RippSnortin
8 ай бұрын
Live and learn
@favillaverde
8 ай бұрын
Haha yup, thanks for the vid great info and easy to follow.
@mobiltec
3 жыл бұрын
Most of my failures and mistakes happen when the camera is running. When it's not running everything goes smooth as silk... LOL.. Wow never seen a bb gun with a magazine like that. I have a .177 pellet rifle. Breaking barrel loader and pump. That thing is deadly and I'm pretty dang good with it if I do say so myself.
@RippSnortin
3 жыл бұрын
I have a few airguns guns .177 and .22. I'll probably do a video showing them soon.
@mobiltec
3 жыл бұрын
@@RippSnortin Cool. I'll do the same. I do have an older video of me shooting my Gamo.
@Korbingriggs.
Жыл бұрын
Think you
@RippSnortin
Жыл бұрын
You bet.
@6ambrown
2 жыл бұрын
I too was freaking out. But I have the AK1 and it was honestly easier than your model. I did get popped in the forehead by a little spring stopper though.
@RippSnortin
2 жыл бұрын
As long as you didn't lose it.
@savageriddle4126
2 жыл бұрын
thanks
@chrisdurocher9688
Жыл бұрын
Question for you. Just got the MPW Bushmaster off eBay, shot a handful of times and worked fine. Now however, the magazine gets stuck in the gun and it won't shoot any BB's. I can get it out by pulling back the charging handle while pressing the mag release button, and popping it loose with a small flathead . Ever had this issue or any suggestions for me possibly?
@RippSnortin
Жыл бұрын
Sorry, never had that problem, or heard of it. You're gonna need to figure out whats hanging up and why.
@chrisdurocher9688
Жыл бұрын
Thanks for the quick response. I figured it out. BB was jammed in the barrel, got it cleared though.
@sahibbahia3780
Жыл бұрын
It’s my first time using a BB gun and I put the BBs in the spring I have a glock 19 gen 3 do you know how I can get the BBs out tht magazine doesn’t have all that and I don’t wanna buy another magazine
@RippSnortin
Жыл бұрын
I also have a Umarex Glock 19x. But l'm traveling for the next month and it's at home.
@Grass5
2 жыл бұрын
What’s the thing at the bottom of the mag
@c1peewee
Жыл бұрын
I did not panic lol I just brung it back and got another
@c1peewee
Жыл бұрын
Guess what it happened again so I know you are telling the truth it is how they made the new cartridge for sure
@scorpionkings
3 жыл бұрын
How do you fix the co2 clip cover for a (Crosman bpms sbr) that won't snap back on. Tried getting a hold of the company that I bought it from, which has proven to be a waist of time.
@RippSnortin
3 жыл бұрын
Well...the only time l have a problem putting it on is when it's not exactly in the right position. Make sure it's completely lined up before applying preasure. It came off, it will go back on.
@s550_juarez
2 жыл бұрын
How did you add that ar 15 stock on it? And do you have a video on it
@RippSnortin
2 жыл бұрын
That's how the R1 comes.
@jeremystack824
Жыл бұрын
This helped me so so much because the fist time this happened to me I was in a panic!
@RageRenegade01
2 жыл бұрын
The bb’s bent the spring so it doesn’t fully go down and now i cant reload it because i need a new spring. Where can i buy one?
@RippSnortin
2 жыл бұрын
Crosman parts 800-7AIRGUN (724-7486)
@LAT-qk3vj
3 жыл бұрын
Do you know how to fix a leaky magazine? One of mine is leaking at the top around the rubber grommet.
@RippSnortin
3 жыл бұрын
No, but l'll probably find out at some point. I've put in a lot of powerletts without adding pelgun oil, and it kind of wore down the pearcing thingy. Will probably need to change that at some point.
@Breakintermissum
5 ай бұрын
Can someone help me my magazine has a magnetized part on the top of the clip where the babies go in and I feel like it’s causing problems
@lljulioll4189
Жыл бұрын
My bbs keep getting stuck inside of the little piece on top of the mag and when i shoot the bb doesnt go out
@RippSnortin
Жыл бұрын
Not real sure what's happening there. I sold my R1, so can't look at a mag.
@user-pk1ek4kj6v
4 ай бұрын
where did you get the ar 15 base pad from ..thanks
@RippSnortin
4 ай бұрын
Got it from Amazon. Made by Missouri Tactical.
@user-pk1ek4kj6v
4 ай бұрын
thank you so very much for the info.....thanks again
@mememine69
3 жыл бұрын
I'm just going to leave the BB stuck in the spring. Shouldn't make any difference?
@RippSnortin
3 жыл бұрын
Probably OK.
@KMDecided
2 жыл бұрын
No ended up making the spring jump out now it’s stuck outside
@fatkid66
2 жыл бұрын
I have a problem with the case of my magazine where when I replaced the CO2, the case would not attach its self completely and it not fully closed on the left side of the magazine. Im 99% sure that thats not supposed to happen, how cpuld i fix this? Thanks
@RippSnortin
2 жыл бұрын
It's a little tricky. Just make sure the locking tabs at the bottom line up perfectly and they should snap in. It came apart, it will go together. Once you get the technique down it will be easy.
@fatkid66
2 жыл бұрын
@@RippSnortin Thank you so much!
@justinpietila6236
2 жыл бұрын
Do you know where to get a replacement spring? I messed up my spring before I realized I could just take that screw out.
@RippSnortin
2 жыл бұрын
Crosman parts department. 800-7AIRGUN (724-7486) You may need to figure out what the part number is. I used to order lots of parts and they wouldn't do anything without one. That may have changed. If not you're gonna have to do some digging. Lots of Crosman forums out there.
@justinpietila6236
2 жыл бұрын
Thank you.
@enjoithls
2 жыл бұрын
@@justinpietila6236 Any luck finding a part number for the spring?
@justinpietila6236
2 жыл бұрын
@@enjoithls I had found a part number in my book but couldn't find anywhere selling it online. I was unable to reach the parts department and gave up and bought another mag.
@catfish4680
2 жыл бұрын
Amizon or eBay . Spring size is 0.5 x 5 x 305 mm this will give you a foot long spring . The original measures around 8 inches so you will have to trim it down to fit . I had the same problem and couldn’t find a replacement from Crosman . They only want to sell you a new magazine instead of a cheap spring . I thank I found them 2 for 12 bucks . I actually got this info from a honest guy from a service center . Enjoy.
@djtredeucepodcastmixxworld7891
6 ай бұрын
What size is the spring? I need tp replace.
@RippSnortin
6 ай бұрын
I don't have the gum anymore so I can't check. But I would just go to a hardware store and get one that fits in the magazine and is about the diameter of the bb. And long enough to apply pressure. Probably will need to experiment. Another possibility is check to Crosman facebook group and see if anyone there knows. Last resort is Crosman Parts but they usually need a part number.
@RRosama3
2 жыл бұрын
Mines wont go down the thing that you use the speed loader to push down it won’t go down so I can’t put bb’s in
@RippSnortin
2 жыл бұрын
You can use a drinking straw as a speed loader. Close off one end of the straw and fill it with BBs. Then on the mag. pull the spring back and carefully tip the straw so the end is where the BBs load. After you get the technique down it actually works better than the speed loader.
Пікірлер: 221