Andy, This is the second time I have responded to your channel. I love your builds and skills. As of the first of the year I came out of hibernation from a 30+ hiatus from model building and you have been a real asset to me. I love what the whole community is doing but I really like the how to's like you do. Final builds are nice but I like to see the techniques that go into the builds. The Scribbler looks awesome!!!! I love the purple on the engine, nice touch!! I saw a older video of yours and it appeared someone was busting your chops for buying a spray booth. I don't know the whole story and don't need to know but what a Jag Wad. Last time I checked we could to as we wish with the income we make. That was jealously! I could see that you were hurt or upset about it! Man I hope you didn't lose any sleep over that one! Anyway when I saw it I felt bad for you, no one deserves that! If you keep making them I'll keep watching them. Thanks for sharing Andy, James Rasmussen
@AndyX
10 жыл бұрын
James , Your Comments are very much appreciated ,, and keep people like me inspired ! .. I wasn't really sad about the booth comment , more confused.. I saved up for it by not buying models and supplies for a few months...lol. thank you for the great post !
@phyllisraines4754
6 жыл бұрын
If you shop at hobby stores there are many other colors like olive green (I used under a large swamp diorama water area and loved what it did), blue (I use beneath regular surface waters), I have seen light grey, red brown, and yellow as well.) Definitely should shop around and look for price differences. It will probably go even further now that I purchased a air brush. I easily used it with a brush. I love these primers in every way and for the cost is well worth the investment when it comes to my projects or dioramas.
@hahamorehaha6869
3 жыл бұрын
I found these about 1.5 years ago. I really like it. I bought it for indoor winter use. Summer time i use duplicolor outside.
@uxbridgeuk
8 жыл бұрын
Its great stuff, I thinned mine down a bit and sprayed it through my airbrush at 20 psi, and it did spray really well, and sanding back is the main concern for most modellers
@badboy_kustomz1648
5 жыл бұрын
Just bought myself a set. Thanks for your info....been watching a lot of vids the last few days on this stuff. Happy building!
@RedDragonModelWerks
10 жыл бұрын
Brother....I "Knew" you would love this! I can't say enough good things about it. As you said....."It's a game changer" as far as Acrylic Primers are concerned
@AndyX
10 жыл бұрын
Red Dragon ModelWerks thanks for turning me on to it
@stevewatts3502
10 жыл бұрын
You succumbed to intro pier pressure, I like it. Always good stuff from you, sir.
@AndyX
10 жыл бұрын
Steve Watts yes indeed , but happy with the results so far
@TheShadeTreeFixitMan
10 жыл бұрын
Looking forward to trying this stuff. Only two colors listed on ebay, black and white. Hope they make grey too.
@AndyX
10 жыл бұрын
Stephen marsh thanks , it's pretty good
@RocketBoy1969
10 жыл бұрын
Thanks for sharing this info! I'm always looking for a good acrylic type of primer.
@AndyX
10 жыл бұрын
RocketBoy1969 glad to help
@RocketBoy1969
9 жыл бұрын
Have you painted with Tamiya over this primer yet? Since Stynylrez is water based, I'm not sure if I can airbrush Tamiya XF paints or lacquer based paints over it.
@AndyX
9 жыл бұрын
I have not tried it myself but others have done so with no problems.It's "water clean up", polyurethane based."water based" is a misconception about most hobby acrylics.
@ratrodmatt1032
10 жыл бұрын
Great video Andy. Thanks for the info, I need to check it out.
@AndyX
10 жыл бұрын
Matthew Gedert your welcome and thanks !
@TheGamerZapocalypse
Жыл бұрын
I Brush Stynylrez on the mini...works great. It's so great, it even adheres to Reaper Miniatures shtty plastic Bones minis.
@winkstrsworkshop834
10 жыл бұрын
By far and away my favorite acrylic primer. I like the fact it self levels and that its dries hard! I have sat for hours with a little figure rubbing on it, just to see how much abuse it could take, and it has yet to rub off! Did the same with Vallejo and it started chipping and peeling after about 3 minutes. Granted I like Vallejo for certain things, but as far as my go to primer Stynylrez took that spot handily.
@AndyX
10 жыл бұрын
Stephen marsh Thank you
@inblindmodeler8786
10 жыл бұрын
Great vídeo Andy x !! Thanks. Frank jr
@AndyX
10 жыл бұрын
In blind modeler thank you sir
@njcivicwagon1
10 жыл бұрын
Great video! Thank you for this review and for sharing all your knowledge to the community whether is painting, machining parts or just general modeling. You are a great mentor. Keep up the good work.
@AndyX
10 жыл бұрын
JORGE RAMOS thank you ,, really appreciate the kind words !
@Roadhog0822
10 жыл бұрын
Awesome review bud thank you for sharing I will check it out
@AndyX
10 жыл бұрын
Roadhog0822 thanks
@ArmourEmpire
10 жыл бұрын
Thanks for the heads up. Good review
@AndyX
10 жыл бұрын
Armour Empire thank you !
@AMERICANLEGENDModelBuilder
10 жыл бұрын
Cool review, I found it a war gamer supply on Ebay also.
@AndyX
10 жыл бұрын
AMERICAN LEGEND thanks
@DaBasementModeler
10 жыл бұрын
Great summary Andy! The product is awesome! Thx for da plug in brother!
@AndyX
10 жыл бұрын
DaBasementModeler thank you for the great review !
@bleedinggumsroberts3579
5 жыл бұрын
Thank you bro
@tntlife73
9 жыл бұрын
decant?
@primativemodelling
10 жыл бұрын
I use my own vomit...Great undercoat....and overcoat (usually end ups on everything)
@stevewatts3502
10 жыл бұрын
Enough with your organic secretion fixation, already... you mad bugger XD
@primativemodelling
10 жыл бұрын
Ha ha ha ; D
@badgrendels
10 жыл бұрын
***** Do you bottle it? Under what brand? Is it available on line? Does it come in White, grey, and black? Does it smell? Does it leave a nice silky finish? Does it sand well? We want to know all about it!!!
@stevewatts3502
10 жыл бұрын
Nooooooooooooooo... Bad, badgrendels! You know I get this message as well? 1, I was having my tea. 2, Mr Whiskey Mischief really doesn't need encouragement.
Пікірлер: 54