I love the random transitions. The camera work just makes this all so watchable. You guys tell a great story.
@CarsandCameras
6 жыл бұрын
Thanks Mitch
@yeetskeetledeet8184
6 жыл бұрын
Y'all deserve so many more subscribers. If only the go kart/mini bike community was bigger!
@StephenButlerOne
6 жыл бұрын
With having 4 wrecked lower discs I can see the pain your hiding in the last clip. Hope it just a nerve, as that will go as quick as it came. You just need to wait. Good luck.
@butre.
6 жыл бұрын
I've broken my back twice, I know that particular pain well
@BrownianMotionPicture
6 жыл бұрын
spinal
@miguelrams6735
6 жыл бұрын
Hahahaha, not at all !!! Was just a flip not a crash!!
@darabradley5173
6 жыл бұрын
Miguel Rams his back hit the roll cage tho
@Camhin1
6 жыл бұрын
The transitions are fucking incredible, go John!
@saucyscrewdriver4008
6 жыл бұрын
Pin it
@CarsandCameras
6 жыл бұрын
Thanks man
@mynameisntleo
6 жыл бұрын
CarsandCameras how much time do you spend editing per video? Just curious how much video you actually record, as in hours, and how much you have to go through to get a 10-15 minute video, and how long it takes. I've never done video editing, BTW, so it's all a quest mark to me
@PKMartin
6 жыл бұрын
Came here to comment on the editing, it's clear you have a lot of fun with it and it they really add some personality to the videos.
@StephenButlerOne
6 жыл бұрын
mynameisntleo I'd bet in the early days, they took hours and hours of video. I'd bet today they know when and what to film. Probably only a couple of hours footage taken now vs a whole day a few years ago. The hard part is deciding which bits to leave on the floor.
@duncan9168
6 жыл бұрын
Poor ike, doesn't deserve this treatment. #PrayForIke
@blorpcartons181
6 жыл бұрын
This channel is the embodiment of what I wanna do pretty much every day... if I had what you have... which I don’t... so just completely disregard what I just said
@rc_action_
6 жыл бұрын
Hey, I say go for it! Just save up the extra $$ and buy a used frame and find a used engine to start out with. I'm sure you could have a lot of fun doing it! Then eventually you could get a welder, and equipment needed to do your own builds. Heck you could build some amazing stuff if you just work hard and save. That's what I'm doing right now, I have at least 10 projects planned. I'm almost 14 so where I live I will be eligible to get a job. I will try to work every day of the week and start saving every dollar. Minimum wage is a little over $7 but it adds up fast if you work for five days a week that's about $35 a week, being saved. I will be able to do projects in no time! So if I can do it, I'm sure you could too! Follow your dreams m8 you'll figure things out.
@mustie1
6 жыл бұрын
stinkin gravity,
@alexsprings87
6 жыл бұрын
Mustie1 and CarsandCameras, 2 of my favorite tube channels!!!
@MrJeepinZeke
6 жыл бұрын
It’s always keepin me down! ;)
@blorpcartons181
6 жыл бұрын
Mustie1 omg it’s mustie 1 on a cars and cameras video... I’m pretty sure I’ve just witnessed the second coming of Jesus
@thomasstrickland0
6 жыл бұрын
Hey bud!
@JC_Young
6 жыл бұрын
your comment just reminds me how badly i want to see C&C do a motorized bike build...
@ExperimentalFun
6 жыл бұрын
you need some STI stickers on that now :)
@jaylehmanvlogs8323
6 жыл бұрын
Experimental Fun that will give them a reason to turbo the yerf dog.....
@IllegallyAcquiredKIA
6 жыл бұрын
Sexually transmitted infection?
@MCFishNuggets
6 жыл бұрын
Gopher Vlogs no...
@casenfranco1769
3 жыл бұрын
I know Im asking the wrong place but does anybody know a tool to log back into an instagram account? I stupidly lost the login password. I appreciate any tricks you can give me!
@ahmadsebastian7633
3 жыл бұрын
@Casen Franco Instablaster ;)
@toddpfister280
4 жыл бұрын
14:37 when you drive for the first time and you thought you did great but your dad needs to get the truck out of the ditch
@zeezore1012
4 жыл бұрын
LOL
@CarsandCameras
6 жыл бұрын
Think it could take one of our slower race karts?
@Stney_
6 жыл бұрын
you guys are freakin awesome btw :)
@snoopy5736
6 жыл бұрын
CarsandCameras dammm, that thing is awesome
@slyknowledged
6 жыл бұрын
Maybe. Is there any chance you can will turbo the dragster at some point?
@harrisonjacob8931
6 жыл бұрын
I believe that it could take on a mildly fast cart.
@blorpcartons181
6 жыл бұрын
CarsandCameras it could definitely keep up with the Murray
@dave1135
6 жыл бұрын
At 11:47, the yerf dog passed a .....yard dog. Lol
@leoconnor4472
6 жыл бұрын
14:23 compare the faces
@715101
6 жыл бұрын
Lmfao john has to turn that into a meme and put it in the outro
@Alysavos-rd4tp
6 жыл бұрын
ahahahah yes
@hellishgrin4604
6 жыл бұрын
I love the finish that Rustolium high heat paint gives, it's like a powered coat almost, but it's not nearly dark enough. Almost a charcoal grey.
@jdspeed99z
5 жыл бұрын
That smoothness you feel in that engine is the difference you're paying for between the clones and the OEM. There are requirements that the clones are not allowed to use as tight of tolerances and as quality materials. Love your channel! Keep doing what you're doing
@dave1135
6 жыл бұрын
12:47 is why every cart needs a roll bar...ive been to accidents with carts that a rollover resulted in a broken neck/paralysis
@MrCasebi
6 жыл бұрын
That transition from the final stop gave me hope for the rest of my day.
@Fullthrottle440Garage
6 жыл бұрын
Buy some welding sleeves guys. They are cheap and effective. Keeps you cool on hot days and protects your arms from radiation. Great video as always
@thiccysgarage8472
6 жыл бұрын
They also work as assless chaps if you put em on your legs
@az_roadtech
6 жыл бұрын
Thiccy's Garage never looked at them that way. But you ain’t wrong lol!
@keylay9453
6 жыл бұрын
No matter how many times i watch it, every single time I watch a video where someone is welding, a little piece of my brain wants me to cover my eyes
@StephenButlerOne
6 жыл бұрын
Kyle Spencer having never welded, I'm ignorant to what decent welding is. Tho I do watch 'make it extreme' and I can imagine that is just filthy welding porn. Johns is more post watershed soft porn. Lol
@rastamanralph6670
6 жыл бұрын
Kyle Spencer av noticed that with all videos with different channels!when I was learning about mechanics the first rule of welding is the mask and it's not good getting a flash.so it makes me wonder why people always show it!
@keylay9453
6 жыл бұрын
Rastaman Ralph if i understand it correctly, its not the light, its the dissapation of electrons moving fast that can puncture the retina. So having a medium(mask, or camera) makes it ok to look at for the camera man.
@kylec6991
6 жыл бұрын
Kyle Spencer ayeee Spencer is my middle name
@digitalbarrito3555
6 жыл бұрын
Yep, almost the same reason filming the sun, and watching that back doesn't fuck up your eyes. It might still come across as really fucking bright on your computer screen, but it won't hurt your eyes, unless you spend 8 hours a day every day doing it, then I'd imagine there might be some long term damage that comes out of it
@stuntmanhn
6 жыл бұрын
*Hopefully Isaac is alright! Looked like his back was really buggin him!*
@Blurgamer17
6 жыл бұрын
He needs an X-Ray and a Chiropractor. Could see his pain like flies on sh*t.
@isaacitllbefine7231
6 жыл бұрын
thanks but my back still hurts
@stuntmanhn
6 жыл бұрын
*Feel Better soon man!*
@raysplace6548
6 жыл бұрын
Isaac it'll be fine Hey dude, get yourself checked out. Hopefully, it's just a pulled muscle.
@butre.
6 жыл бұрын
Isaac, go to a doctor. I've been living with back pain for 20 years because I thought I could tough it out.
@GeorgeT6566
Жыл бұрын
Love these older videos. Wish you guys was still making videos like this now..
@bigfootandbananaman4746
6 жыл бұрын
Glad it had a roll cage. I flipped my go kart 2 years ago and I had a seat belt and a helmet on with the roll cage and I was just fine. In fact, my first thought was to shut off the engine so it wouldn’t run upside down
@marcschneiderphoto
6 жыл бұрын
nice to see that you're working on your editing skills!
@AEON.
6 жыл бұрын
Sioux Falls, South Dakota here - we finally got a Harbor Freight! The other one in the state is - exactly the furthest opposite side of the state! I'm stoked - it just opened yesterday. No more wondering where I need to get certain things lol
@saucyscrewdriver4008
6 жыл бұрын
So glad you guys didnt remove those bars that hit your head. Shit woulda been so much worse
@blakeransford791
6 жыл бұрын
Love this channel! More drag kart!
@Alysavos-rd4tp
6 жыл бұрын
IKE LL BE FINE
@superbob1906
5 жыл бұрын
I am sorry its bean a year but wut is that pepe
@neilpeart9322
3 жыл бұрын
Reminiscing the old times when small stuff was made into a dope project, how far y’all have come.
@Lulanda93
6 жыл бұрын
There’s a reason why the 9hp Subaru feels more powerful and smooth it’s an actual quality built blueprinted engine from japan not some chinese junk that says it has 5 hp but really we don’t know. Really would like to see you guys mess with more like this, Robins Subaru, Briggs, Kohler more often I think you guys will be really surprised with the overall outcome of the build. If you look online Briggs and Stratton makes race engines and you can get the speed and power y’all are looking for without all the extra weight and size issues. Keep up the fun guys!
@deangelolawson6184
6 жыл бұрын
dont forget some lights for the yerfdog for when yall go back to the atv park..that way yall can do a little bit of night riding...just my two cents. love how much this channel has grown ive been a sub here since the 50$ go kart build an look forward to all your videos
@isaacitllbefine7231
6 жыл бұрын
thanks
@harrisonjacob8931
6 жыл бұрын
Can You do another episode of the 670cc drift cart! Iike this comet so that people can see it!!
@harrisonjacob8931
6 жыл бұрын
Could you possibly think about twin charging the drag cart?
@chevyguy5525
6 жыл бұрын
I liked the comet, but I’m not sure what the point of the rest of the comment was...
@ohmygodcaiden
6 жыл бұрын
Harrison Jacob *comment*
@R4MP4G3RXD
6 жыл бұрын
Welp... I think it's time for a safety harness :D
@chevyguy5525
6 жыл бұрын
R4MP4G3RXD They come stock with seatbelts...but yeah, a five-point wouldn’t do any harm. Speaking of safety, how’s the Drag kart going to be equipped?
@billsafreed9982
6 жыл бұрын
Was thinking the same, keep the body in the set and the head from hitting the roll cage. A helmet will help too!
@leodanryan966
6 жыл бұрын
Or back brace and cane? You know, six of one half a dozen..
@ZacharyCartwrightAaron
6 жыл бұрын
You guys should put big tires on the 670 and take it to the beach... That would be some crazy fun!
@squarepegroundhole132
5 жыл бұрын
Stumbled across this channel and it may be the most fun channel I've watched. Don't even own a gocart but my kids may need one now
@jakebednarski7549
6 жыл бұрын
John's face at 14:40 is great
@tyronegreen9441
6 жыл бұрын
Ike I'm glad you're okay but it still look like fun even though you were flipped upside down you guys doing awesome job
@garrettthompson9326
6 жыл бұрын
For your drag build you should put a rotax 1000 or 800 because I'm currently making a 1984 Honda Odyssey with a 583 rotax in it
@propaneandpropaneaccessori3446
6 жыл бұрын
"Where's my hemlet " lol
@stoobydoo4790
6 жыл бұрын
THINGS ARE LOOKIN' UP UP OOOOOOOHHH OOOOOHHH !!!!! ENJOYED IT (as always)!!
@stoobydoo4790
6 жыл бұрын
Sorry I replied before the end of the video. Hope you're alright & not too stiff tomorrow. Take care y'all
@markdacosta4577
6 жыл бұрын
ikes back hurts good camera transitions and wipes i got a laugh out of this one
@Rideaholic069
6 жыл бұрын
Ike I always said you sound like Hank Hill. Now you saying dang it Bobby sounds just like him lol.
@lm386opamp
6 жыл бұрын
i like the new editing transitions!
@MetalheadEchidna
6 жыл бұрын
those scene transitions are awesome!
@jacobirwin1524
6 жыл бұрын
I’m actually mad it took him saying damnit Bobby for me to realize who he sounded like after all these years lol
@austinnfoster9863
6 жыл бұрын
Best go kart/building cool Shit channel on the tube!
@ZeD69420
6 жыл бұрын
I want to see how much power you get when to weld two 670 together and make a v4 out of them and put it on the drag gokart.
@MrMCTario
6 жыл бұрын
When I saw the title I thought you had sold the yerf dog. ...or "flipped" it for more money. Glad to see the collection isn't shrinking!
@bryduhbikeguy
6 жыл бұрын
Dang.Glad you're ok.When you opened the box,saying'2-belts'I though,t'kewl,safety harnesses'.
@GeneralShowHD
6 жыл бұрын
Put quad tires on it tho to have way more grip. Them tires arent nothing to that thing.
@bobcatstillwell2713
6 жыл бұрын
When I was younger i took more risks. Im 53 now. I really think about how things can go wrong fast. I love this channel but please be careful. I know i sound like tour mom..lol I thought about what would of happened if the steering linkaged went out on the kart that was going 72 mph. Be careful Ike.
@dream2sea
6 жыл бұрын
Bobcat Stillwell 2 Well said!! 👍🏻
@_thomas.watkins
6 жыл бұрын
At 11:30 that's how people know that you're breaking and they won't crash into you!# LOL
@a.dudeman7715
6 жыл бұрын
Ya'll should totally do a single-cylinder diesel kart! Like a Yanmar or something like it. I think it'd be pretty friggin' neat, myself. Poor yerf dog, though. Guess it was lookin' to get points for tricks!
@V8Power5300
6 жыл бұрын
A. DudeMan or a v-twin diesel. They are like 1000$ on aliexpress
@DAVIDISEPIC1111
6 жыл бұрын
they have some diesel briggs
@MrNosajwhitey
6 жыл бұрын
U guys r awesomely doing things as usual
@brandon2076
6 жыл бұрын
you guys need to do a 4 way race: Yerf Dog VS Murray 420 VS 4WD kart VS Minibike
@richc9503
6 жыл бұрын
"Ya got some brown stuff on your shirt there, maybe from you?" LMFAO... Takin the Yerf Dog places it was never meant to go!
@Ubernator
6 жыл бұрын
Ike's Hank Hill impression was weak this episode but I'll allow it on the basis of the good tapping the shaft comments. Keep doing God's work Ike and that other dude
@randomguy93984
6 жыл бұрын
I had one of these as a kid. Now I gave it to my nephew and niece and their dad is hot ridding it like this. I think he watches your vids too lol
@randomguy93984
6 жыл бұрын
I would love to see a little turbo on it.
@MississippiMudMX
6 жыл бұрын
U can hear John trying not to laugh
@alyouresocool
6 жыл бұрын
Glad you didn't die! Hope your back is better.
@isaacitllbefine7231
6 жыл бұрын
thanks
@DeadBaron
6 жыл бұрын
Dragula in the background! Love that thing!
@FirstGenDiesel
6 жыл бұрын
That was awesome! Hope your back is ok.
@isaacitllbefine7231
6 жыл бұрын
still hurts
@kennya8681
6 жыл бұрын
New shirt gonna have to say on the front "it was straight up" and on the back of the shirt "you gonna have pop my back bud"
@lifewithjonathan5277
6 жыл бұрын
Hope Ike is ok. I would add a seat belt to the "Yurf Dog!" Lol! I once rolled my murray 3 time going full spead. I was lucky I had a harness on.
@michaelmcfarland3108
6 жыл бұрын
I can't help but laugh hard everytime Issac says dang it ........dang it Bobby
@jaybyrd1935
4 жыл бұрын
So John I see your welding is getting much better I can’t wait till my stores to get up to par LOL!
@stevenjohann5435
6 жыл бұрын
Since I have a Robin 6.5 ex17 on my Manco greenkart, I will always vote for more subaru yerf dog videos!!!
@riccardo1796
6 жыл бұрын
Going all out with dem videe-ya effects
@adam_r4471
6 жыл бұрын
Lol how did Ike like being a tortoise ...that go-kart is really FLIPPING good huh
@alenzorko5009
6 жыл бұрын
OMFG THAT RED AUDI IS SOOOO NICE
@dream2sea
6 жыл бұрын
Alen Zorko Thank you!! 😊
@051570orion
6 жыл бұрын
I thought Ike was going to hit that vertical bump harder but then the roll over and I was like "OH NO !!! " Hope your back is feeling better Ike , do they go kart air bags ? ....
@jman6030
6 жыл бұрын
Goes good.. horizontal and vertical lol hope you're ok man
@rc_action_
6 жыл бұрын
Hey Ike, heal up my dude. Sorry you had to get hurt. Time to get some harnesses installed before y'all go offroading again. I don't want anyone hurt.
@silverMDX
6 жыл бұрын
"Damn we broke the go kart..."*guns it down the trail* " It'll be fine."
@KGCIGREVIEW
6 жыл бұрын
You guys should build a tow truck murry..so when you guys break down in odd places you can just tow your gokarts back to shop without having to figure how to get them back to the shop...that would be a awesome build id love to see..keep it in mind boys..love the vids keep up the good work
@will2-b150
6 жыл бұрын
HOLY FLIPPIN SPIT!!
@jaredhopper8429
6 жыл бұрын
nice editing! lol btw that flip was badass hope your back aint too bad
@isaacitllbefine7231
6 жыл бұрын
still hurts
@brittanywainscott3051
6 жыл бұрын
Love you guys, always looking forward to the next video. Hope you feel better Ike. from Lynchburg VA.
@isaacitllbefine7231
6 жыл бұрын
thanks
@gagepuffinbarger6939
6 жыл бұрын
At least the roll cage did its job. 👍👌
@WhizFlipper
6 жыл бұрын
Lol he laid there for a solid two seconds. Lol probably like Ricky Bobby on 🔥
@CarsandCameras
6 жыл бұрын
Help me tom cruise
@ghomerhust
6 жыл бұрын
thumbs up for flipping karts in the dirt
@ultralightflyer1260
6 жыл бұрын
best channel on youtube any day of the week ,love it. yall have yet to make a bad vid, and if you ever do it'll be fine.
@brivyplowman4620
6 жыл бұрын
I'm hurting with laughter over Ike's roll over :)
@VTiredIron
6 жыл бұрын
I feel your pain, Isaac. It definitely doesn't take much to tweak a bad back. Pop some ibuprofen and rest. Feel better and great video!
@isaacitllbefine7231
6 жыл бұрын
thanks
@DJGHOOST1999
6 жыл бұрын
7:03 that moment when he totally frget that he is working on a 9+ hp engine until he gets the last screw in
@morefpsgamingftw3062
6 жыл бұрын
rollcage for life
@codysams4932
3 жыл бұрын
Love how he said don’t kill me after he rolled it😂😂
@fidenziogarza1388
6 жыл бұрын
I'm diggin the transitions lol
@btpearce
6 жыл бұрын
Careful there boys, I hope Ike is not hurt too bad, I could tell his back was jacked up by the way he was holding his head.
@isaacitllbefine7231
6 жыл бұрын
I still hurt
@btpearce
6 жыл бұрын
I can identify with you, I flipped my riding mower on a ditch bank sort of like you did except I didn't have a roll cage to catch the mower. Also I was cutting grass and the blades were running. ( the Lord had his hand upon me that day) I got stove up pretty good but nothing broke or cut off. Get well soon Isaac :-)
@Chalz108
6 жыл бұрын
Ike was definitely hurting in that last shot of the video
@isaacitllbefine7231
6 жыл бұрын
yep. and I still hurt now. 4 days later
@Chalz108
6 жыл бұрын
Isaac it'll be fine :( I'm sorry bud.... Maybe throw some icy hot on it and rest up. Take some Tylenol bud and get well soon. Best wishes
@isaacitllbefine7231
6 жыл бұрын
thanks
@Chalz108
6 жыл бұрын
Isaac it'll be fine welcome bud
@MrLendermanGaming
6 жыл бұрын
Damnit ike, Youve got too many cool cars, NICE BURB! hope your okay man!
@isaacitllbefine7231
6 жыл бұрын
thanks
@roguetorino
6 жыл бұрын
these transitions are getting good.
@ilovetoyotatrucks
6 жыл бұрын
I didn't know y'all would get #SODEEP on this show today!.... I think you really hit the spot n COVERD them base's lmfao
@spencerkrebs5316
6 жыл бұрын
Pro editing skills
@brockmorgan75
6 жыл бұрын
I would like to see all of your project carts versus all of red beards project carts 🏁🏁🏁
@mastaajbomb
6 жыл бұрын
Best opening ever
@DJRaevenHeart
6 жыл бұрын
12:44 "Hey man, I'ma test the roll cage and see if it works...." 12:49 "It'll be fine."
@StevesDIYProjects7
6 жыл бұрын
man one these days get to meet ya guys. i say damnit bobby a lot too. king of the hill is one the best shows. but i rem it from a old movie but i cant rem which movie cause its been since i was a kid. im 38 now.
@sethhonda4203
6 жыл бұрын
You should install lights! Or get a light bar and put it on top
@VTiredIron
5 жыл бұрын
That awkward ride back to the shop after you convince your best friend to do something that gets him hurt
@connerhooper2083
5 жыл бұрын
I know this is a old video , I watch all your stuff but when Ike said dang it Bobby I died laughing 🤣🤣🤣🤣
@shakerattleandrollgarage7223
6 жыл бұрын
Ike I feel your pain man 😣! 4 in my back 3 in my neck.... sucks !!
Пікірлер: 797