360 for 6 minutes works great for me ! Colors are so vibrant
@1tbaccus
3 жыл бұрын
The colors or so bright and pretty and minions are not my thing. This turned out amazing! Well done!!!
@lovely31bluprint
3 жыл бұрын
Oh. You got a bigger deep fryer. I wouldn't think the tumbler fit. Nice results.
@nahnisjourney1406
Жыл бұрын
I have watched your video before… I can’t remember if I made a comment on the lines marching up. Trim away the excess paper from the top, insuring that the image placement is where you want it. Wrap the tumbler with it standing on the top the tumbler (upside down). Gently tap the paper and tumbler on the table so the paper is flush even with the edges of the tumbler. That allows you to match up the lines perfectly. Tape the top and the bottom tightly to prevent any gap between the paper and the surface of the tumbler. Tape the bottom and top twice to make sure that it’s tight, which eliminates the chance of ghosting. I learned this technique from watching the Industrial Fringe KZitem channel. Roy is a great resource for proper sublimation techniques on several substrates. Although I am two years after the fact, I hope that you have overcome the issues of ghosting and uneven alignment. Best wishes!!! PS. That color was absolutely 💯 banging!!!! Thanks for sharing!
@AnitraKianna
3 жыл бұрын
The difference in colors and lining them up is because of where the paper overlapped. Try cutting off the excess before taping up.
@SharoninKentucky
3 жыл бұрын
Folding the sub paper over the bottom or top will push it away from the surface no mater how tight you tape. I must say yours is really taped, it should work.
@PatriciaGoodwin-u8u
10 ай бұрын
Wonderful
@johnbuskey479
3 жыл бұрын
Love the color. I would use the straight tumblers....easier I would think. Thank you for sharing.
@CraftingMadeEasy
3 жыл бұрын
Yes, I have learned the straight ones are MUCH easier to use.
@jessdon1229
3 жыл бұрын
Wow that looks great! I can’t wait to get my tumblers now!
@serenityinhim
3 жыл бұрын
Thanks for testing and sharing!! Love it soOo much its beautiful!!! New subscriber!! Hugs from PA - Christine
@happylocksmith
3 жыл бұрын
That was interesting. I sublimated mugs a few years ago and found reducing the image brightness by around 10% before printing applied with a mug press using the recommended settings the finished image came out bright and vivid. A couple of months ago I was researching a plotter cutter and the Cricut was on my list until I realised the print and cut limitations so decided on the Cameo then found people having issues with the 4 so went for a good used 2 its one of the best things I have bought the best thing to do is download the software which is free and play around with it. This will give you a good head start should you decide to purchase a Cameo in the future. Good video another thing one can do with a air fryer !!
@CraftingMadeEasy
3 жыл бұрын
Thanks, I may give that a try.
@stephanielomax7240
3 жыл бұрын
It's beautiful!
@crystalteneen1
Жыл бұрын
This was awesome. Thank you for this video
@drlnmfr1
3 жыл бұрын
You have a tapered tumbler where you have to use the tapered template for it which will align your lines perfectly.
@kimberlylooman3175
3 жыл бұрын
Great video. I am a beginner with sublimation and seen you can use air fryer. Wow. So excited I have an extra air fryer I had purchased and was going to take it back. So dont have to now. Going to try this. Thank you!
@sherrywatson1283
3 жыл бұрын
Beautiful Job!!!
@BigGuyCustoms
3 жыл бұрын
Sister, the reason the bottom is lighter than the top is because you used a straight image on a tapered cup. If your image had been tapered like the cup and you'd cut it out to match, then, you would've had the same amount of pressure on the bottom half and the color variants would be the same.
@CraftingMadeEasy
3 жыл бұрын
Thank you
@peej061085
3 жыл бұрын
Great video. First one is in the fryer now!
@CraftingMadeEasy
3 жыл бұрын
I hope it turns out great!
@meiy09
3 жыл бұрын
What size air fryer do you have?
@peej061085
3 жыл бұрын
@@meiy09 it's a 7qt. I can fit one 20oz tumbler in or 2 12oz. But 30oz is too big.
@vikki92411
2 жыл бұрын
Cool 😊
@jenniferlivingston1237
3 жыл бұрын
Pretty
@Iamcraftycassy
3 жыл бұрын
Ahh I’m so scared to try these lol
@CraftingMadeEasy
3 жыл бұрын
I was too. But you just have to go for it. You will do fine.
@franchiseplaya75
Жыл бұрын
You did great on the first go. I think I can do this now. Now I’ve seen some turn theirs halfway through. You let yours stay the full time right? And do you think the shrink wrap is ok in the air fryer?
@CraftingMadeEasy
Жыл бұрын
Yup, I let it stay in the air fryer the whole time, with no flipping. Yes I have seen others use the shrink wrap
@franchiseplaya75
Жыл бұрын
@@CraftingMadeEasy thanks
@2399pimtreeguy
3 жыл бұрын
Very nice! what size is your air fryer
@CraftingMadeEasy
3 жыл бұрын
It is a 6qt
@homescentscandle
Ай бұрын
What size air fryer do you have
@1WPrncssMasarah
2 жыл бұрын
Hello. I just started and my oven keeps burning my shrink wrap. I have it on 375 in a convection oven and it starts to burn the wrap after like 60 seconds. Help. Please
@CraftingMadeEasy
2 жыл бұрын
I don't use the shrink wrap, I just use the tape. But the shrink wrap has to be a specifically for the oven. It can't be the one for making baskets.
@beachlifesoy2253
3 жыл бұрын
I tried to sublimate a mug in my air fryer and it's pretty difficult to preheat because as soon as you open the door even for a second to put the mug in the temp drops like 20 degrees so then the mug has to be in there for more than 5 minutes just to get it up to the proper max temp then let it go at the right temp for 5 minutes and the mug came out faded! ugh what do I do?! tia :)
@CraftingMadeEasy
3 жыл бұрын
I have a regular air fryer where you set the temp once its in there. I would say put it in there for the time you need but rotate it, so it does not burn.
@itzmarly2018
3 жыл бұрын
Did you put it on bake? Or air fry setting?
@CraftingMadeEasy
3 жыл бұрын
I just set the temp and time. My air fryer doesn't have those options.
@LOVESTOWRITEKID24
3 жыл бұрын
if u dont have a printer 2 print big images can u somehow split the image to make it bigger than the cup and somehow piece it 2gether2 wrap it. cuz i ordered the epson 2720 and it doesnt print very big.
@commercialaccount9501
3 жыл бұрын
The measurements for the cup are less than a letter sized piece of paper. Your printer doesn't printer letter?
@CraftingMadeEasy
3 жыл бұрын
If you print your image landscape you should be able to fit it on an 8*11 sheet
@malva4838
3 жыл бұрын
I'm very new to sublimation. Do you have to peel off the paper when it's hot?
@CraftingMadeEasy
3 жыл бұрын
You can let it cool off some.
@nahnisjourney1406
Жыл бұрын
Cold/cool peel is best because it’s still sublimating while it’s still hot, which means the gases could still float and cause ghost when you peel away the paper. I hope you have gotten the technique down perfectly by now since I’m seeing the video 2 years after she posted it. Also, look for my other comment to her about how to prevent uneven alignment and ghosting. Simply turn the tumbler upside down and tap the paper flush to the table and tightly to the tumbler. Be sure to try to trim away the excess paper from the bottom, only leaving just a tad bit beyond the edge of the bottom of the tumbler. You can also order a PINCH PERFECT from Amazon. Use that to make the paper wrap tightly and close the seem. Remember: The Air Fryer can not be used for cooking food once it’s been used for sublimation. I use an air fryer OVEN with convection technology. Made by Black + Decker. Using an oven allows you to sublimate 3 or more depending on how large the oven is. Best wishes.
@josephinejacobs2159
2 жыл бұрын
I have seen ppl say they use regular copy paper and not sublimation paper. Have you tried this?
@anagricelisleon2203
Жыл бұрын
I've used Regular Lazer paperwork. But is never the same. Colors are not so bright.
@mariajackson2570
3 жыл бұрын
It turned out cute. Are the fumes real bad when you use the air fryer? I saw another video and the persons smoke detector was going off. There wasn’t any smoke though. Thanks for the video.
@CraftingMadeEasy
3 жыл бұрын
Thank you. There is an odor. So I try to have a window open. No smoke or anything.
@stormiewills7053
3 жыл бұрын
Hope you dont cook in that?
@mariajackson2570
3 жыл бұрын
@@stormiewills7053 lol! Only mugs and tumblers. Definitely not food
@SharoninKentucky
3 жыл бұрын
@@stormiewills7053 why not? I cook in mine and use it to Sublimate too.
@simple_man6264
2 жыл бұрын
Yeah don’t cook with it after this the chemicals are not something you want in your food awesome job on the tumbler btw
@amandacasillas3450
3 жыл бұрын
How many quarts is the air fryer?
@CraftingMadeEasy
3 жыл бұрын
6
@80simplyme
3 жыл бұрын
How much money you spent on tape?
@CraftingMadeEasy
3 жыл бұрын
I buy in bulk from Amazon
@everythingtuoi4829
3 жыл бұрын
I tried this. But my colors didn’t come out as vibrant. I got a vintage tan color
@CraftingMadeEasy
3 жыл бұрын
Are you using an air fryer or a convection oven?
@commercialaccount9501
3 жыл бұрын
@@CraftingMadeEasy air fryer is convection
@commercialaccount9501
3 жыл бұрын
You probably need to adjust your temps/time, sounds like your ink may be over cooking
@CraftingMadeEasy
3 жыл бұрын
@@commercialaccount9501 I am talking about the actually oven, like the toaster one
@1HandySavage
2 жыл бұрын
i am struggling i got a faberware airfryer convection oven and the only setting it lets me do 375 400 is on pizza. i did one after heat gun and shrink wrap and it came out brown on the black. I was told if it comes out brown its too hot. Also my shrink wrap melted and i bought the ones sold from a specific jL something vendor that specializes in it but i doubt they will get back to me. Im going to try it at 6 instead of 7 min and then 375 degrees instead of 400 with a sub. Not going to use heat gun and let the oven shrink wrap. If it comes out bad i will let you know but i need your help because your colors are popping.
@CraftingMadeEasy
2 жыл бұрын
Hey. Have you tried using masking tape? If not, try using that and reduce the temp to 375 for 6 minutes. And let the air fryer cool down in between cups. I found that when I do multiple cups, the air fryer holds that heat. and can burn the cups easily.
@latriceford9479
3 жыл бұрын
What was the best time and temp?
@CraftingMadeEasy
3 жыл бұрын
For my air fryer, I have a system. I found that 390 at 7 minutes works best for the cup. Then the 2nd and third cups, 380 for 7 minutes. Let it cool down for about an hour, then repeat those steps. By doing that I haven't burnt any cups. I had to do 50 cups this past Christmas, with that method, no issues.
@latriceford9479
3 жыл бұрын
@@CraftingMadeEasy do you turn it at any time?
@CraftingMadeEasy
3 жыл бұрын
@@latriceford9479 Not when using my air fryer. I never turn them
@cbumbaugh7364
Жыл бұрын
@@CraftingMadeEasy do you rotate at all? Im about to buy a bella pro series 8 qt and want to make sure before I buy lol
@CraftingMadeEasy
Жыл бұрын
@@cbumbaugh7364 no I don't rotate it
@laverngordon
Жыл бұрын
It wouldn't sub on the stainless steel
@340lou7
3 жыл бұрын
What is the maker and model printer🖨
@CraftingMadeEasy
3 жыл бұрын
The cricut maker, and I use an Epson 7720, that I converted to a sublimation printer.
Пікірлер: 79