THANK YOU!! I was about to dump mine - frustrated...but saw how you could take the carburetor apart...thought it was a sealed unit. Took it apart - cleaned it out - running like a top !! THANKS!!
@PNWSmallEngineandLawn
Жыл бұрын
Glad to help. Always like it when a machine can be saved
@billmartin8874
Жыл бұрын
@@PNWSmallEngineandLawn YES! Your KZitem video and instructions were so good, that I immediately did the same to mine! Just followed what you did! Fantastic job!. But now, the battery shows 'green' light (fully charged) but only does a bit of a buzzing sound when pushing the button. Unit is about 5 yrs old(?). bad battery - or bad starter???
@TheCrittercam001
2 жыл бұрын
Another job well done sir 🤠
@user-so6lm1en8b
Жыл бұрын
And the video with the carburetor was awesome thank you I did the same thing 😊
@stillwater7
5 ай бұрын
Great video good job explaining everything.
@bigcatdaddy7573
Жыл бұрын
Awesome video! In depth!!
@user-so6lm1en8b
Жыл бұрын
And the video with the carburetor was awesome thank you I did the same thing
@jesusdrummer21
2 жыл бұрын
Yeah just fixed one 2 weeks ago. Drove me crazy..leaking. Cleaned carb...new bowl gasket....finally it was the needle. Thank God I had a needle
@PNWSmallEngineandLawn
2 жыл бұрын
Leaking fuel drives me insane. It never leaks when everything is apart, only when everything is put back together
@vegasbuggy
8 ай бұрын
Wow, my problems are solved! Thanks.
@PNWSmallEngineandLawn
8 ай бұрын
Glad it helped
@nickcamera5544
Ай бұрын
great video and instructions were excellent. Now, where can I find carbeurator parts for my power washer?
@PNWSmallEngineandLawn
Ай бұрын
Partstree.com or Amazon are good places
@christopherwells372
Жыл бұрын
Thanks.....I'd like more detail on carb cleanout.... I'm aware of float valve getting crud. Not confident on removing those other items to clean.. would help with close up...
@PNWSmallEngineandLawn
Жыл бұрын
Thanks for the info. I have started lowering the angle and getting closer. I wouldn't be to worried about removing everything else. If you do and have any questions feel free to let me know and I can answer your questions
@MichaelEllis-mh4pr
2 ай бұрын
Thanks!
@charlesgraham9064
Жыл бұрын
I have tried your suggestion of moving the red plastic lever to the Off/Stop position, holding the choke open and then sliding the choke control assembly onto the carb. The results are the same, the choke control lever will not both open and close the butterfly. My linkage is the same as yours. A three position hard plastic, red choke lever. A carb that has an upper post that engages the inside curve of the red plastic choke control lever. When the red control lever is in the Off or Cold Start position the butterfly is closed and the lever is not in contact with the red choke control lever. The red control lever does not want to move from Cold Start to Warm Start. The red control lever makes contact with the post on top of the carb but just pushes against it. The butterfly will not open. Separately the red choke control lever as well as the choke butterfly move easily.
@PNWSmallEngineandLawn
Жыл бұрын
Luckily this is my personal machine. I will take a look when I get home. I can take a quick video and get it posted
@nelsonfigueroa5609
Жыл бұрын
O hace it, on mine the Bendix went away inside the electrical starter. Now, I can’t find the Bendix or the Electric Starter it’s still working but with the rope. It’s 3,100 psi.
@charlesgraham9064
Жыл бұрын
i have the exact same unit, I removed and cleaned the carburetor, no problem. What"s the trick to re-installing the choke lever onto the carb? The lever does not rotate the butterfly to the open position, it just pushes against the butteryfly post.
@PNWSmallEngineandLawn
Жыл бұрын
If it has the same switch as mine you should be able to turn the switch to off and open the choke. It should slide on. Do you have a metal linkage?
@scottlouie4988
Жыл бұрын
I have the same power washer but mine . Had to pull start or will not start on the starter button took the spark plug out will crank with that out but not with it in have you seen this before
@PNWSmallEngineandLawn
Жыл бұрын
Yes. I would say either the battery is low or you could have to adjust the valves. If the valves are out of adjustment the compression release isn't working and the starter can't overcome the compression
@lonniedotson7558
Жыл бұрын
first time to try and start power washer (Subrau) why won't battery charge? Pluged in all night it wont click or anything thing! Dose water have to be truned on just to start?
@PNWSmallEngineandLawn
Жыл бұрын
It does have to be turn to choke or run before it will allow the starter to run. Of not then it is probably a bad battery or maybe bad starter
@MichaelEllis-mh4pr
2 ай бұрын
Great video. Fixed it myself. Seems to idle much higher now.... Is that a problem?
@PNWSmallEngineandLawn
2 ай бұрын
I would make sure the linkage on the throttle isn't bound up
@Greg-me8le
6 ай бұрын
I have that unit. Trying to get the electric start to work before selling it. I have never used the electric start. the pull start works fine. The battery is fully charged but pushing the button does nothing. No crank. Any suggestions?
@PNWSmallEngineandLawn
6 ай бұрын
I would take the starter off and connect it to a battery and see if it is any good. If so make sure the switch connections are good or if there is a bad ground
@gaylepitts3349
Жыл бұрын
Please where is the best place to buy the carburetor
@PNWSmallEngineandLawn
Жыл бұрын
Cheapest place is Amazon. Probably the better place to ensure your getting the right one is partstree.com or ereplacementparts.com
@haleylowrance1667
5 ай бұрын
Im haveing trouble getting the main jet out, looks like it may be stripped. Any ideas how to get that out? Or can I clean it with out removing the jet all the way?
@PNWSmallEngineandLawn
5 ай бұрын
If it is stripped in the past I have used a smaller flathead screw driver and tapped on it. Smaller easy outs can work but it destroys the jet. Best idea is true get some carb spray and try cleaning it without removing it
@Sanriago98
3 ай бұрын
So overall is this a good buy for residential cleaning jobs? Or waste of money?
@PNWSmallEngineandLawn
3 ай бұрын
Ya it is a good machine. Just make sure it doesn't run low on oil
@colinzhang4690
4 ай бұрын
What did you spray at your video 3:27 ? Carburetor clean spray?
@PNWSmallEngineandLawn
4 ай бұрын
Yes. You can use brake clean or carb clean
@user-so6lm1en8b
Жыл бұрын
I have the same Subaru power washer I have a problem with the switch I don't remember how it goes back together can you help me
@PNWSmallEngineandLawn
Жыл бұрын
If you turn the switch to the run position then you can put the bracket on then the air filter housing. Put the two 10mm nuts on and turn the switch to choke. After that make sure you see the choke is closed. If it is then just put the air filter on and the cover.
@usloplui
11 ай бұрын
The jet is too tight and I could not unscrew it. I probably striped it. Any suggestions?
@PNWSmallEngineandLawn
11 ай бұрын
Only other suggestion is a easy out but it will ruin the jet
@nelsonfigueroa5609
Жыл бұрын
Sometimes the carb buoy gets stock and overflows
@PNWSmallEngineandLawn
Жыл бұрын
Ya. Just had that exact same issue with another model just like this
@tenmilliondollarsnow
Жыл бұрын
So. Ours will not start via electric. Only with rope. Battery is good. Suggestions?
@PNWSmallEngineandLawn
Жыл бұрын
I would check the battery again. It isn't spinning the motor fast enough. It could also be a carb problem. Needs a cleaning.
@kalvengibbons3412
Жыл бұрын
I’m about to buy this same pressure washer from someone for 50 n he said the battery is just dead can you make a video on how to change the battery
@PNWSmallEngineandLawn
Жыл бұрын
I can. I will probably make it and hopefully have it up in a few days
@elchekaner
Күн бұрын
Are you in the Pacific Northwest which city?
@PNWSmallEngineandLawn
12 сағат бұрын
I am about 30 min outside Portland Oregon
@jesusdrummer21
2 жыл бұрын
And those green gaskets....SUCK
@user-so6lm1en8b
Жыл бұрын
And the video with the carburetor was awesome thank you I did the same thing 😊
Пікірлер: 52