CORRECTION: At 3:16 instead of loading the film with the sprocket holes up, load with them facing DOWN. This will ensure that any undeveloped bits of the film are not in important areas.
This film was processed in a Lomo UPB-1 developing tank, capacity 10m of 8mm or 16mm film. Super 8 carts of regular 15m (50ft) length will have to be split and done in 2 lots.
Formulae for processing liquids: (1L) All liquids used at room temperature (about 20 C)
1st and 2nd Developer: Caffenol CM
1L water (warm for mixing, use at room temp.)
54g washing soda
16g vitamin C
40g coffee
Bleach (A)
500ml water
2g potassium permanganate
Bleach (B)
500ml water
27g Sodium Bisulphate
(mix A and B before use)
Clearing bath
1L water
30g Sodum Metabisulphite
Fixer
800ml water
200ml Ilford rapid fixer.
Instructions
Process
Prewash 2mins
1st Developer 20mins
Wash 2mins
Bleach 3mins
Wash 2mins
Clearing bath 2mins
Re-exposure to light
2nd Developer 15mins
Wash 2mins
Fixer 10mns
Wash
Final rinse
Use distilled water with drop of
fairy liquid for final rinse
Hang up to dry, spool and project!
Please subscribe for more super 8 and how-to videos.
Негізгі бет Super 8 developing in a Lomo Spiral
No video
Пікірлер: 148