We're all waiting for the battle of the 2inch drones 😆
@Rimzler
Ай бұрын
Mannnn you are right! I will make a tier list in internet fashion ahahah
@vceenomaine2562
Ай бұрын
Beautiful I like this set up. Great for beginners and I think good intro to whoop flying
@hallfatherofthree7022
Ай бұрын
Sometime if you get a chance I’d like to see a video showing your current favorite acro setup. And your current favorite sub250 acro setup. Or just post it in a comment. Your videos are my favorite reviews. I’m more into acro and you always give honest acro reviews for every product with lots of good information. Thanks for all the reviews.
@Rimzler
Ай бұрын
My favs are ever changing with new drones coming out! I use o3 most of the time So far my favs and the drones I carry with me are: Avata 2: the most versatile 5 inch: new nazgul eco DC, flies great and is very affordable 3.5 inch Cinewhoop: the geprc cinelog 35 V1, is lighter than the V2 and with an action cam does an amazing job, I don't use it with o3 O3 sub250: flylens 85, no jello, crazy small silent and can still rip! I use this drones for traveling/ filming, if you need a sub 250 acro, I would pick a 3/3.5 inch open setup with o3 like the stingerbee or the emax 3.5, I wish there were more drones in this category!
@DronePH-2024
Ай бұрын
GREAT REVIEW BROTHER happy flying👍
@Rimzler
Ай бұрын
Thank you so much!
@eddie_yuanshen
Ай бұрын
what a long fishing rod!it saved the drone~
@Baatory
Ай бұрын
Funnily enough what You suggest about getting into fpv is what I tell people. With an exception of dji care. I find it cheaper to buy another used drone with battery or parts. Great Video, pleasure to watch :)
@MrKarator
Ай бұрын
True story, Avata is an amazing as a first FPV drone, super durable! I even took part in local races on it
@ilmanu
Ай бұрын
Ciao caro, ottimo recupero 🤣. Sono pienamente d'accordo con te per il suggerimento di iniziare con un Avata (se ci sono le possibilità!). Vedo molto bene questo prodotto per un ragazzino sotto i 16 anni che vuole avvicinarsi ai droni fpv ma che non può ancora utilizzare prodotti tipo Avata. E' completo e molto economico. Sempre ottime recensioni. Un saluto, Manuel 👋
@Tobi123Tobs
Ай бұрын
totally honest review, as always ! But Mr Rimzler... "because of you" I spend much money into FPV :) your Geprc Domain 3.6 Review - GREAT, I bought it ! your IFlight Nazgul Eco 5 review - GREAT, I bought it ! And now... this funny litte drone... I tend to buy it too, since additional FPV just for fun tool... mostly for risky indoor flights :) I may unfollow you, since as you see - "because of you" I spend much money :)
@juliusen7336
26 күн бұрын
i would much rather invest in a mobula 6 or something like that, a 1s whoop that actually flies good!
@vceenomaine2562
Ай бұрын
🎉 beautiful stuff I like Rimzler ❤. This will take about 2years to get where I am. 🌍😢
@brandon9689
Ай бұрын
Now I want to see a pair of box goggles big enough to fit a 3.5 inch quad and a TX16. I can be Lord Dark Helmet while i fly FPV
@Smagsfpv
Ай бұрын
Boom 😂💪
@Rimzler
Ай бұрын
💥💥💥💥💥💥
@georgeaura
Ай бұрын
I wish you would have flown in air mode outside really trying to push its acrobatics.
@Rimzler
Ай бұрын
I did, it was hard not getting blown by the breeze, you can do a couple of flips but it's just that, no power for acrobatics, it's more of a indoor drone
@Baatory
Ай бұрын
How would You compare it to Inductrix If You had a chance to fly it? I found Inductrix quite fun to fly but acro almost impossible due to lack of power
@skairkrow9800
Ай бұрын
still waiting for an RTF FPV Drone that the goggles will except glasses.. its when you said narrow on the side (because then glasses won't fit), I lost interest. 8(
@Rimzler
24 күн бұрын
They all give a small box goggle yes, maybe you better hack some cheap prescriptions inside it, or get a goggle kind of goggle, that has slots for prescriptions
@skairkrow9800
24 күн бұрын
@@Rimzler So I just got my fix for glasses yesterday. I own the BetaFPV Cetus Lite kit (got it about a week ago) I tried using Armless reading glasses with the Cetus goggles. they sort of worked but after a few minutes they tended (about 50% of the time) to tilt on my nose inside the goggles. sometimes falling off entirely. my fix was to buy a comfort kit for a VR headset (Quest 2) by KIWI. its a padded face pad with glasses extension for VR goggles($19.99). I Duct taped them on. they hold solid. my regular glasses fit inside and the FPV goggles are very comfy. I'm hoping when upgrading to a bigger drone kit (I'm not a serious FPVer so my next kit will probably be the E_MAX EAZY Pilot Pro) that they will fit that as well.
@matheuscostamilonasmarcoli1263
Ай бұрын
Best tinywhoop for those how wants to try fpv just to see if like or not
@Rimzler
Ай бұрын
For indoor yes, super chill flying
@billmcdonald4335
Ай бұрын
Not a bad choice o test the waters with, but not ideal. I'd recommend buying at least 5 or 6 extra motor sets, if one decided to take the plunge. Those little brushed motors only last maybe 6 to 8 hours, max. A novice would probably burn up one set just getting a feel for the thing. I started with a Blade Inductrix, and I bought an extra 10 motor sets for it. I went through them in less than a year. By then, I'd moved on to brushless motors. That's the downside of this drone: the motors. A brushless micro would have been a better fit, to be honest.
@Sam_Leo1
Ай бұрын
Hello, I fly with a DJI Mini 3 Pro and want to experience FPV.Which model would you recommand me under 249 grams and already assembled(i am really bad with tech, I've watched nice FPV videos but I did not understand one thing about buying everything separate)?The model in the video seems too low quality for me, I just want something really well made like the Mini 3-4 Pro and super easy to use.
@billmcdonald4335
Ай бұрын
@@Sam_Leo1 For what you say, I'd suggest a used first-gen Avata, No tiny whoop will be of acceptacle quality for you, I'd expect. Non-DJI kit has a steep learning curve - more so than DJI's.
@Sam_Leo1
Ай бұрын
@@billmcdonald4335 I see and why not then the Avata 2?Avata 1 is very noisy I heard and people hears it and they improve other things on the Avata 2 right?Or wait for Avata 3 that will correct I guess the surcharge of weight of the drone that makes it fly not smooth like a real FPV from what I have seen on YT?
@billmcdonald4335
Ай бұрын
@@Sam_Leo1 Coz a used Avata is cheaper than a new Avata 2, and will cost less to repair as well. You are going to break it while learning. Accept that much. Buy a cheap option first, learn on that, then get the one you really want. That's how I did it. Or, reject my opinion and forge your own way. U do U.
@BrandonP_01
Ай бұрын
No chicken test? 🤔😂
@MrPhilbautista
Ай бұрын
The chickens might be the ones to chase it and we would not see them in the video 😂
@pointblank1292
Ай бұрын
What an unneccessary thing :D As a beginner just buy something used or take a couple of hundred bucks more and buy some real beginner fpv drone.
@Sam_Leo1
Ай бұрын
Hello Pointblank, I fly with a DJI Mini 3 Pro and want to experience FPV.Which model would you recommand me under 249 grams and already assembled(i am really bad with tech, I've watched nice FPV videos but I did not understand one thing about buying everything separate)?The model in the video seems too low quality for me, I just want something really well made like the Mini 3-4 Pro and super easy to use. So yeah, I am looking for a real beginner fpv drone but already assembled with the googles etc?
@pointblank1292
Ай бұрын
@@Sam_Leo1 Hello, if you are really bad with tech then get an avata. Over 250g tho. All other real fpv require some technical knowledge.
Пікірлер: 38