Check out the list of tools I use on amazon.com/shop/rorotech
@Evgeny_Miroshnichenko
Жыл бұрын
It's really easy if you have a relevant equipment...
@RoRoTech
Жыл бұрын
sure thing
@roasthunter
Жыл бұрын
Super easy if you have a tool that costs several hundred or a thousand pounds
@RoRoTech
Жыл бұрын
yep
@sakisalfista620
7 ай бұрын
Always start from the hole point to the cable side. Otherwise you press the copper from the lug further from the cable itself leaving a hollow space between cable and lug when you are done.
@RoRoTech
7 ай бұрын
Good to know, thanks 👍
@williamthompson7777
Жыл бұрын
I do crimping all the time in the field. Not a big fan of the strippers but the crimping is beautiful!
@RoRoTech
Жыл бұрын
agreed 🤝
@1NationMediaUS
7 ай бұрын
Now if you drill the front out with a small hole. Then With a torch and solder you can completely fill the inside with solder. That’s how we fabricate our bonding/Grouding straps. Elements be damned, nothings getting in. Then some industrial heat shrink and bam! Pro leads.
@RoRoTech
7 ай бұрын
Sure thing 👍
@FunTimePassFTP
Жыл бұрын
Very Nice 👍
@RoRoTech
Жыл бұрын
Thank you 👍
@ronensadeh2841
6 ай бұрын
Wrong crimp direction. Proper crimp direction is from inside out of the terminal lug not from outside in . Proper crimp direction helps to reduce pressure of crimped material inside the terminal lug.
@RoRoTech
6 ай бұрын
Good to know, thanks 👍
@NamsteMitro
6 ай бұрын
👌🏼👌🏼
@adamepb
7 ай бұрын
No tool description or info on rhe terminal used.
@RoRoTech
7 ай бұрын
Oh, sorry. I forgot that 😮
@usernamelastname9708
7 ай бұрын
How long does it take you to do all that?
@RoRoTech
7 ай бұрын
3 minutes
@secondaryunit
11 ай бұрын
Where can I buy that tool? What brand and model?
@RoRoTech
11 ай бұрын
Hi there. It is made by Würth.
@tanishqbhaiji103
Жыл бұрын
No inspection hole?
@RoRoTech
Жыл бұрын
nope
@pradeepchaudhary5996
Жыл бұрын
what kind of wire is this?
@RoRoTech
Жыл бұрын
Battery cable 95 mm
@robertbelknap1483
9 ай бұрын
Why crimp solder
@RoRoTech
9 ай бұрын
You can do both
@bambino3074
10 ай бұрын
Yeah everyone has one of these in their garage smfh
@RoRoTech
10 ай бұрын
Sure thing 🤪
@apolinarponce4506
11 ай бұрын
No tool info ?
@RoRoTech
11 ай бұрын
Good point, I will write it in the description. Thanks.
@ramshabdgupta
10 ай бұрын
Sir ji, is machine ka price kitna hai?
@RoRoTech
10 ай бұрын
The one I use in this video from Wurth costs arround 800$ but you can find cheeper, for just 100, I guess.
@alpachino468
4 ай бұрын
This is only 'Super easy' if you have hundreds of dollars worth of equipment! Pointless video!
Пікірлер: 40