The reverse headstock has a lot to do with it. The wound strings do not require as severe of a break angle. I had the same issue and replaced the nut with a well cut graph tech along with "nut sauce" and made taller spacers for the string trees. Eliminating the trees would have worked also, but I didn't want to leave empty screw holes in the head. I also installed graph tech saddles, but I'm not 100% sure they were needed.
@billfournier3625
2 жыл бұрын
This trick actually worked for me. I have been battling this guitar for months and can finally enjoy it. Thanks for the tip Ryan! I owe you a reverb pedal 😊
@60CycleHumcast
2 жыл бұрын
Nice! It’s a fun guitar besides the tuning issue.
@arnaldogonzalez3330
2 жыл бұрын
@@60CycleHumcast Removing the string trees (also) solved all my tuning issues. Thanks for the tip! Before the fix, i "accepted" the idea that this super fun guitar would always need constant re-tuning, and it would not be useable for recording (or live situations --- it was *that* unstable). Since the fix, i can't believe how well it stays in tune -- even after pretty good use of the tremolo. Thanks again
@Tigershark-qy2gq
2 жыл бұрын
This absolutely and totally fixed my tuning issues. I've now played the guitar a month without needing to tune more than every hour or so of play. I can't expect better than that. More so, now it's sound is just crazy. It's made it an even more slightly raw and aggressive tone. Thanks so much Ryan! You nailed it. Fender, remove the string trees from all future produced Super Sonic guitars.
@60CycleHumcast
2 жыл бұрын
A few people have claimed the newer version doesn't have the issues because the trees are moved back or higher or something. No idea if thats true yet. But I'm glad this fix is working.
@Tigershark-qy2gq
2 жыл бұрын
@@60CycleHumcast Higher would be my bet Ryan. I think it put too much tension, at just the wrong angle height to stay in tune.
@VodkaSelekta
2 жыл бұрын
If you wanna fix your tuning issues just try spinning around 720 degrees whilst jumping up and down three times whilst singing the lyrics to "Let It Be" and all of your tuning issues will be fixed. I did it to all of my guitars and this neat trick worked on all of them.
@bgm9517
2 жыл бұрын
I did this and confirm it works.
@randallsavage4135
2 жыл бұрын
+2 CONFIRMED WORKING METHOD I added in completely shaving myself top to bottom, front to back, side to side for the aerodynamics and it WORKED!
@jeffleecust
2 жыл бұрын
So staggered tuners (locking or not) would be the best bet. That or putting some type of spacer and a much longer screw to make the string trees taller
@stephanematis
2 жыл бұрын
New nut and staggered tuners most likely the right combo.
@noeyeballs503
2 жыл бұрын
I just bought one used for 250 and it came with staggered locking tuners I got lucky
@panamapk
2 жыл бұрын
Thanks man. I’m going to try this tonight. Love the guitar but the tuning stability is frustrating
@60CycleHumcast
2 жыл бұрын
let me know how it works out!
@panamapk
2 жыл бұрын
It really helped. Like you said, it’s what you would expect from a strat trem now. Actually using the wiggle stick on it now. Thanks, and thanks for all the great content.
@mr.smithgnrsmith7808
2 жыл бұрын
HEAVY strings
@gorlagOv
2 жыл бұрын
That paint job is sharp. I just did a similar color for my friends Festival short scale with a gold foil pickup. I put a metallic undercoat on it and did a little bit of a relic job. Turned out cool. The kill switch on your supersonic is a nice touch.
@facetats2103
2 жыл бұрын
I always assumed the point of a reverse headstock was to squash the need for string trees by giving the b and high e the proper break angle by default.
@Russell_Optics
2 жыл бұрын
I agree 100%. The wound strings do not require as steep of a break angle. By shortening the length of the un-wound strings it eliminates the harmonics that make it sound like a sitar.
@UmVtCg
2 жыл бұрын
The point of a reverse headstock is Jimi Hendrix playing a right hand Stratocaster lefthanded and people thinking that that upside down headstock looks cool and want to copy it.
@facetats2103
2 жыл бұрын
@@UmVtCg Music Man has a 4x2 headstock partially for the reasons mentioned above. It's as much form as it is function.
@alphanumeric1529
2 жыл бұрын
@@facetats2103 Think MM invested highly in function, and let form follow function.
@UmVtCg
2 жыл бұрын
@@facetats2103 Sure they do, but that's not the reason headstocks are reversed. Aesthetics are the main reason reversed headstocks exist. In fact the Gibson headstock design has terrible functionality but still it exists and is pretty popular. Why? Again aesthetics.
@bldallas
2 жыл бұрын
Hey, FWIW I’m an engineer…… let me help you…please: The reason strings go SHARP when you dive down on a whammy bar, is because something ever so slight is mechanically catching your strings at the headstock. When you dive, you you loosed string tensions, which allows the strings to slide forward thru the nut slot, under the string trees and it can even slightly loosening the wraps around your tuning pegs. When you release the whammy bar, any sharp edge and/or friction between string winds can hold the string forward, thereby pulling the string sharp. TRY THIS-->. To see/feel what I mean, gently lay your left index finger over the strings, but up against the back f the nut, on headstock side. Now, with your right hand slowly dive the whammy bar. I find it helps to keep my guitar on my lap and use a snug fitting strap to make sure the guitar itself makes no movement. You should feel the strings sliding ever so slightly, back and forth under you finger. Anything that inhibits that motion, no matter how slight, can and will affect your tuning stability. So….. First, the break angle might not be the issue, but you can remove your string trees or raise them by adding a second bushing and a slightly longer screw. Also, when you remove your string trees, buff the undersides AND THE EDGES to a super smooth shine and lube the bottoms with graphite before reinstalling. Vintage style Fender string trees have sharp square edges that can catch strings as they attempt to slide past. The 2000 grit wet dry paper will work, but for polishing metal parts, I use a cheap, battery powered Dremmel-like tool, with cotton buffing bits and some inexpensive buffing compound. Amazon has combo kits for very little money. Also, in addition to the nut “sanding,” (or buffing, rather) that you’ve done, it is important to carefully to take any sharp edges off the nut ends of slots. I also use the folded over sand paper, but ever so slightly swipe at an angle over the front and rear edges of the slots. So, to recap, the goal to achieve stable tuning to to eliminate all possible square corners, sharp edges and friction on the headstock end of your guitar. (Note, I do also polish and lubricate the saddle slots as well). Oh and talking “lube”, my favorite “lubricant” is finely powdered graphite. It comes in a tube and costs about $4. Way back when I was a Cub Scout, my Dad and I used the same stuff to lubricate the axle nails on my troop winning Pinewood Derby Car!!. But seriously, It is black like pencil graphite, so use it sparingly. But with the tube type of packaging, it has a fine point with a hole in it, and you can put a small “puff” at each of your contact/friction points; the nut slots, back of the string trees and on each wrap around your tuning peg. Also, as I mentioned on your other video, make sure you have perfect wraps (no string crossings) and minimal turns, to also reduce the surface area for friction. I use two wraps on The E A D “wound strings” and 3 to 4 on the G B E smooth strings. A FINAL COMMENT REGARDING TUNERS: cheap, malfunctioning tuners, can turn under string tension. This would only happen when you bend or pull up on your bar (assuming a floating trem.). Bad tuners, allow your strings to go FLAT, not sharp, as they lengthen the strings under temporary tension increases, then go flat, when that increased tension is released.
@shigerustretch
2 жыл бұрын
Good info. I didn't know a lot of this stuff and was surprised by a couple things. The least surprising thing though is that you were a Cub Scout.
@Broccoli_Highkicks
2 жыл бұрын
Thanks for the tip. I'm not refinishing mine, though. The shell pink is part of the reason I bought it ;-)
@Tigershark-qy2gq
2 жыл бұрын
So doing this with mine. Thanks Ryan! I love what you've done with your guitar. Most badass colour on a Super Sonic I've seen.
@GDT1124
2 жыл бұрын
That guitar is sooooo sick. Glad you found a fix.
@r2d2mxrocks
2 жыл бұрын
I think the main problem with reverse headstock guitars is that you are putting the string trees on the wound strings. They have more friction compared to the plain strings. Maybe a Reverend style string tree or a roller tree would be better
@r2d2mxrocks
2 жыл бұрын
What I want to try is modifying the nut and putting a zero fret. That would reduce a lot of the nut binding issues.
@60CycleHumcast
2 жыл бұрын
i think it does well enough without the trees that theres no reason to replace the trees
@60CycleHumcast
2 жыл бұрын
@@r2d2mxrocks I do love a zero fret
@mikedwiles
2 жыл бұрын
@@60CycleHumcast Been running my strats that way for years. Never had a string jump out at a gig or any other time. I'm sure certain techniques might find the need for them. So far, I haven't. But, I'm not a string thrasher either.
@vrieskip
2 жыл бұрын
Okay I need to try that. I have a limited edition six gun with a reversed headstock and a strat trem. It’s never out of tune.
@MrWilber765
2 жыл бұрын
Glad you sorted the tuning out, but the real winner of this video is that fresh trim you're rocking!
@GunsNRoosendael
2 жыл бұрын
As long as the open string doesn't sound like a sitar when strummed, it really doesn't need a string tree.
@chrollo0427
2 жыл бұрын
im much less hesitant to pick this guitar up someday now. Thanks.
@adeptgopnik
2 жыл бұрын
I was close with my suggestion. I had a feeling it was with the string trees, but i thought you just werent lubing them with the nut sauce. Glad you figured it out though.
@KeithDautrich
Ай бұрын
Hi Ryan - Two years ago I had a buddy bring in his guitar (super strat) with the same kind of issues. To fix his took replacing the nut with a Fender LSR roller nut plus installing staggered tuners as well. Tuning issues disappeared plus I was able to get almost perfect intonation and a lower string height too. He still is gigging with his guitar and has only needed to change out strings when they start to sound dull. Just another idea to considerr - have a great weekend!
@kylewilliams3559
2 жыл бұрын
If you look at old demo vids of the fender pawnshop version you'll see that they didn't come with string trees at all
@eldritch6871
2 жыл бұрын
gotta say man, that paint job you did looks really cool. Mine looks so boring to me now
@EliseOfTheValley
2 жыл бұрын
Guitar techs hate him!
@hermeticbasementstudiosinc4904
2 жыл бұрын
Tuning issues aside... that color looks SICK.
@viktorpramas6400
2 жыл бұрын
Thanks for the advice! You are right and think it feels much better playing it overall now. Genius!
@Taallyn
2 жыл бұрын
Ryan can wiggle his stick without repercussions now! P.S. KZitem's Premiere Notifications stunk today.
@Im.An.Alien.Youre.Terrestrial
2 жыл бұрын
I've always taken off the first string tree on my strats and only left the last one for the B and High e strings
@terrysbookandbiblereviews
6 ай бұрын
I really like the way that guitar sounds!
@zeroboyrick1717
10 ай бұрын
Birds head knob my favorite for everything. Very easy to know where you are at with just a glance.
@picksalot1
2 жыл бұрын
EVH used to wind the strings up on the tuner post instead of down to improve tuning stability, as he wanted to reduce the break angle behind the nut. On my Strat, the low E and G string tended to return sharp after deep dives. Winding just those 2 string up the tuning posts has reduced the problem substantially.
@randallsavage4135
Жыл бұрын
I know this is an old comment but, can you further explain what you mean by winding them up? I'll hit Google in the mean time, I'm just having a hard time with a new to me Vista
@picksalot1
Жыл бұрын
@@randallsavage4135 If you wind the strings "down" the Tuning post, the break angle the string exits the Nut towards the Tuners increases. If you wind the strings "Up" the Tuning post, the string has a flatter break angle exiting the Nut, and therefore has less chance of binding at the Nut, but more chance the string will jump out of the Nut if played too hard.
@Seventeen_Seconds
11 ай бұрын
Wow that colour is amazing. Esowcially with the distressed/faded look.
@BlugubriousMusic
2 жыл бұрын
I agree with all who point to reverse headstock being why this worked... I have two cheap (very very) cheap guitars with reverse and did not add trees to one and it is very stable. There is some science in the wound string length above nut and not having same issues as unwound.
@ABUSHfan
Жыл бұрын
This is actually super helpful. Going to try this in the AM.
@PeterMoore350
2 жыл бұрын
Thanks for a great tip. I really enjoyed the previous video too. Greetings from NZ.
@conesa.supersonic
2 жыл бұрын
I love the guitar but it was impossible to play in a show... I struggled a lot and couldn't get it to tune. you are a genious!!!!!!!!!
@ottovonnekpunch1268
2 жыл бұрын
+1 vote for a set of staggered tuners! I bet you have a set lying around, Ryan...
@matthewd8296
2 жыл бұрын
I put a set of roller string trees on my super sonic and fixed the tuning issues immediately.. although I have my bridge decked with 5 springs...
@thebluesrockers
Жыл бұрын
Roller string tree's, and locking, bridge saddles should make that guitar stay in tune like a floyd rose..
@romantrix
2 жыл бұрын
My strat also had two string trees, I removed one of them which was innecessary (strings 3 & 4). The other was raised with a string ball-end so the break angle is just the necessary and the friction is minimized. Lube on the string tree of course. If you have a couple of seconds during the song after heavy use of the tremolo, a good trick is to bend the strings (playing or in silent), that will restore fairly well the pitch of the detuned strings.
@hardline2a
2 жыл бұрын
My goodness haha! I think I would be subscribed even if I wasn't into guitars. Your laugh and expressions are just the best
@martinohare9179
Жыл бұрын
mate that works!!😂😂😂im fuckin delighted i only bought this for the looks now it stays in tune , bonus!!
@bretrich
2 жыл бұрын
The problem I had with mine was the Block under the bridge. The metal was so soft that the ball ends got stuck in there and wedged in a strange spot. My fix was to replace it with a brass block. The only downfall was that the trem bar was a different size, but I don't use it much on this guitar anways.
@ElTurfStuff
2 жыл бұрын
I use a single roller tree with stacked fender locking tuners. Expensive but worth it. It's the reverse headstock design that does it.
@v_virus
Жыл бұрын
Thank you very much! I solved the problem on my brand new super-sonic immediately by following your method!You are an angel!
@octobersunn
2 жыл бұрын
Wow I may actually get a super sonic now. I was worried about the tuning issues.
@dubster82
2 жыл бұрын
I don't put much stock into Graphtecs materials. I've they're nuts on my guitar and can still get binding at the nut. I'd recommend a roller tree vs the Graphtec one, but if it's working without, that's great. It's just annoying it leaves holes in the headstock if you want to remove them. I fitted sperzel staggered tuners to two strats. One I don't mind the holes on, the other, I fitted roller trees just to cover the holes. The roller trees I use actually have the break point to one side of the screw too, so for the same screw position as you have you can have a tighter or a more relaxed break angle over the nut.
@runingblackbear
Жыл бұрын
Going to have to customize my super sonic axe when I by one
@scrub8423
2 жыл бұрын
I can say that the new bridge definitely helps with the stability as well as this. While this is 100% the first thing you should do with a supersonic (worked great on mine), as someone with the stock bridge with no altering it still goes out of tune pretty quickly when doing more than fluttering with the trem. That being said, it was unplayable before because of how unstable it was, and now I'm comfortable using it as a gigging guitar. Tysm you saved me from returning this amazing sounding model!
@NintenDub
Жыл бұрын
It's because they purposely rush the 6 screw placements on the term..all you gotta do,is back out the middle little bit, set the 2 on the ends where you want em, and than bring the 4 in the middle back down,but not as much as the others. This is 100000000% always the issue with the vintage strat bridge. Even if done precisely, you have 6 screws and 6 points of contact.if those screws aren't perfectly round and made correctly to a high spec (they're not) than it hangs up. I've done this on all my bullet strats and you can beat on them and they don't go out of tune.one of them is more impressive, the others can and will go slightly out. But my 2014 china bullet strat is 100% in tune no matter how much I use the bar
@Snarkyone1965
2 жыл бұрын
I was going to mention the huge break on those string trees last video, but am rather new to the guitar so I thought for sure that you either tried that already, or I would be laughed out of the room for such a silly suggestion, and to stick to being a drummer…
@60CycleHumcast
2 жыл бұрын
sounds like you should speak up more often, lol.
@rauldoppler1890
Жыл бұрын
IT WORKS!!!! IT REALLY WORKS!!! Now I can use the tremolo too. Gracias Ryan, saludos desde España.
@mikedwiles
2 жыл бұрын
I would suspect that the nut material is a bit soft and increasing friction through the slots. You proved that by reducing the downward force which is one of the two components of friction force, the other being the coefficient of friction. A nice Graphtech nut should work, even with the string trees if desired. In other words, replace the nut with better one. It's pretty easy. Get the one with the precut slots. Then, all you have to do is carefully sand down the bottom of the nut until you get the correct height. Don't glue it in either. It will make it easier to adjust more later if desired.
@michaelgnapp3571
Жыл бұрын
Trem tuning issues are the result of friction. Trems vary the string tension, causing the strings to move longitudinally over all friction points - tuner post windings, fixed trees, nut, and saddles. I eliminate all friction with locking tuners, roller trees, roller nut, and roller saddles. Eliminate the friction altogether.
@johnnyguitar7921
2 жыл бұрын
lol, this is the Squier Jazzmaster,,, but i still love it as i dont really play "normal" stuff in it,, once you use the Termolo then boom, out of the original tune
@iainmcguire7190
2 жыл бұрын
Thank you for this. Been struggling with tuning issues on this thing and this has made the most difference of anything I've tried. Which is almost everything else. Has anyone tried restringing it with lighter strings again after this? Went up to 11s, but would really prefer anything lighter, for extreme bends
@60CycleHumcast
2 жыл бұрын
id be curious to know how it takes lighter strings now too. Maybe ill try that next time i restring it.
@vinny943
2 жыл бұрын
My daily drivers are 8s 😂 but I’m pretty sure this guitar would feel crazy with 8s
@mr.smithgnrsmith7808
2 жыл бұрын
@@vinny943 8s?! Smfh…are you a 10 yr old little girl?
@78tag
2 жыл бұрын
I usually unsubscribe from channels that use clickbait titles but you made me laugh with this one.
@60CycleHumcast
2 жыл бұрын
lol, this was a bit of a joke on clickbait titles. Im sure I did lose a few subs over it.
@alanswanson7515
2 жыл бұрын
One trick I've had success with is a quick upward tug on the trem bar after dive bombs.
@BrentAdams
2 жыл бұрын
What about a "spacer" to raise the string trees up a little to reduced that break angle? If there is no issue with having enough pressure at the nut..... then I'd say you're good to go!
@Paul_Lenard_Ewing
2 жыл бұрын
I have MIJ ancient Fernandes Native Pro. It did use a small bar to put all the strings instead of using string trees. Without it the tuning on the whammy does not go out of tune any more than my SG on a tune and it of course does not have a whammy.
@josephpickard3108
Жыл бұрын
Funny thing is I'm a lefty and have mine set-up 'upside-down' so it's like a normal Strat headstock and don't experience the same tuning issues. What I will say though is the trem-block is atrocious in quality, I've never had a guitar where it's borderline impossible to replace strings in under an hour. I could do with switching the nut over/buying a new 40mm nut and fitting lefty. I'll do that when I change pickups though.
@WilliamHaisch
2 жыл бұрын
You are not crazy. I removed the string retainer bar on my Hamer Slammer Daytona (a Strat copy) due to the same tuning instability issue.
@nicholas_james
2 жыл бұрын
My MIM Super-Sonic came with only 1 string tree for the 2 lowest strings. It's about an inch farther from the nut than the Squier trees. I never noticed that until today... I wonder what the new MIJ Fender Super-Sonics come with.
@blobbitty
Жыл бұрын
Dude thanks so much it was driving me nutz. Also i noticed the ppor quality of the tuners themselves. The heads on mine actually vibrate. Thinking of dropping a tiny bit of super glue on them to make them stop
@carwynvan
2 жыл бұрын
Could it be because it's a reverse headstock? So the extra friction from the string trees is there on the fatter strings. Because the trees are supposed to keep the break angle close enough across them all
@jonclegg9169
2 жыл бұрын
That's probably it -- the shallowest break angles are on the thickest strings.
@philson138
2 жыл бұрын
I own a mexico Supersonic from 2012 and never understood your tuning problems, mine's perfectly good. I just checked the headstock and it only has 1 string tree - for the E and A string - and the string break angle is not as sharp as yours. I tried to release the strings from the string tree, but the E string keeps popping out. (but as I don't have tuning problems I put it back in)
@eljoel89
2 жыл бұрын
The string tree on the E and A may need to be drilled farther back. The second tree might not be necessary. A set of Schaller locking tuners would be pre staggered. Then you don't need any string trees.
@dkwallis
2 жыл бұрын
Would replacement tuners need to be left handed because of the reverse headstock?
@joelshollenberger7457
2 жыл бұрын
string trees are on the wrong strings thanks to the reverse headstock , wrong break angle on the wrong strings
@jinbyun
2 жыл бұрын
yeah, I wonder why those string trees are so close to the nut? they should be where regular string trees are for the higher strings, between 2nd and 3rd post, nearer to the 3rd post.
@Ra-gv6lx
2 жыл бұрын
Another awesome episode, keep it up 🎸
@birdsong2552
7 ай бұрын
Shouldn't the hendrix stratocaster have the same problem? It also has a reverse headstock.
@derekdoessound
2 жыл бұрын
That killswitch is sick!
@terryenglish7132
2 жыл бұрын
Locking Tuners certainly won't hurt...
@DjDoggDad
Жыл бұрын
Hello! I was wondering if you still had this guitar in your possession (its been 1y since this vid came out) and heard of the inverted tuning covered in an R.J. Ronquillo video, this seems like the absolute perfect prebuild for such a tuning! Love your reviews keep it up!
@MrTokyoJunkie
2 жыл бұрын
I hate that this works lol All this time I spent wrestling with this guitar and Ryan over here just plops em out of the string tree "well there's yer problem"
@60CycleHumcast
2 жыл бұрын
And It’s a totally free fix. That’s rare for a guitar KZitem video lol.
@ck-ck
2 жыл бұрын
I replace stringtrees always by ones with those little rollers, they never bind …..
@verseludes
7 ай бұрын
I wondered - what about the bottom two strings? They are not placed in the string trees but are under a great break angle since the tuners are closer to nut. I also have Supersonic, but I want to elevate it into its best form, already I thought of replacing the tuners with gotoh ones. Opinions? I dont usually mind having to tune this one because I don't use tremolo heavily, partly because my main issue with it - the guitar body itself is so tiny the trem arm reaches quite far and that makes it uncomfortable for me to strum and use it at the same time. But I am not a great player so that has to do a lot with that.
@lettuce_spray
2 жыл бұрын
A good set of roller saddles will drastically improve tuning stability
@CassDase7
2 жыл бұрын
Anybody know what size trem bar this takes? mine came with a bar that was too big
@Mr.Monster1313
2 жыл бұрын
Do they make little spacers/washers to go under the string trees? Can you just raise em up alittle..i wonder if that could work also..hmmmmm maybe who knows...
@mikedwiles
2 жыл бұрын
I've seen the chrome ones with the barrel spacer under them. Also, there is a nice one that they normally use on the nicer strats. The issue that makes this a bit different, someone else pointed out is that the trees are on the wound strings, the largest ones. I never thought about that. But, those large strings really want to bite into the nut with downward pressure. Usually, it's the three slippery solid strings and only the smallest wound. Probably need a really hard nut, like bone or brass.
@bciecko1
2 жыл бұрын
Maybe It's an upside down neck thing then? Tension too much on the bass side strings in the trees than the treble side. 🤷🏼
@nickfromnebraska
2 жыл бұрын
I have a set of roller string trees on my ‘96 American Standard Strat that seem to work well, can’t remember what brand they are though. It also has a Fender LSR roller nut on it which I’m sure increases stability also but the roller string trees might allow you to still run a tree especially it you spaced the height up so the angles aren’t so severe coming off the nut. My OCD would get to me leaving them completely off the trees lol.
@howitusedtobe
2 жыл бұрын
Check it … lube up the string holes .. get a brass block and better more adjustable sting trees.. also having an upside down headstock doesn’t help.. I have that issue because I’m left handed and I’ll take rightys and flip them properly and set them up .. my strat used to do that.
@kians1339
2 жыл бұрын
Funny enough I was having tunning issues with my squier bullet mustang. I tried this trick with the D G & B strings, and now they dont go outta tune as drastically as they did before with big bends. I kept the high E-string in the tree since i didn't have any issues with that. Thanks for the tip Ryan! Maybe the larger headstocks could be a factor to stability issues too?
@1rwjwith
2 жыл бұрын
Well done, that guitar design seems to be very flawed in that respect. Can't say I would ever buy that model though!
@RR-ho5ek
2 жыл бұрын
You are correct, that is way to much break Angle, and a string tree on a wound string makes it that much worse. Another idea that fender suggests on vintage bridges is to loosen the middle bridge mounting screws a half turn, and just leave the outside screws tightened down. To the idea that an american version would be any better, I don't believe that. They would be constructed with basically the same materials, with the same design, common sense, no difference.
@60CycleHumcast
2 жыл бұрын
ive got the bridge screws set up that way, yeah i agree about the mia thing. This is a fundamental design thing not a parts quality thing.
@nicosonic
2 жыл бұрын
so why do they put string trees exactly if you can do without ?
@davidreidy5750
2 жыл бұрын
That guitar is sweet I love the kill switch 🤖📡
@Guitars-N-Guns
2 жыл бұрын
Never seen string trees that close together in parallel...seems like the E/A string tree should be up the headstock atleast an inch further than the D/G. Less break for those two (E/A).
@60CycleHumcast
2 жыл бұрын
I really think it just doesn’t need string trees at all.
@kingpotato48
2 жыл бұрын
That guitar rules, you wail 🦄
@RubyRoks
2 жыл бұрын
If i had thought to try this with my old squier strat 8ish years ago, i don't think i'd have sold if for my Epi Les Paul Junior (which has its own tuning issues)
@user-mf3cx7mb9k
2 жыл бұрын
Like the guitar except the reverse head...
@LikeigiveAFaboutU
2 жыл бұрын
Jeez that guitar is pretty bright to the eyes
@andrewquigley8052
2 жыл бұрын
If you do end up finding that you need some break angle or the strings buzz or pop out with heavy handed playing you could sand and polish up the graph tech trees because they’re the same material as the nut and you could add those metal spacers off a set of tree from a squier usually the two spacers are different heights and for a longer screw you might be able to cut down a p90 screw I’m not sure how well that would work but it would be a neat fix if you end up having problems but I have all my strat trem totally locked to the body so I’m not very familiar with fighting tuning stability with trem use
@60CycleHumcast
2 жыл бұрын
I’ve had 0 issues with the strings popping out with heavy playing or heavy trem use.
@RandyFricke
2 жыл бұрын
I have two Strats with the floating tremolo setup that stay in tune perfectly. I simply raised the string tree and lubed the part where the string rides with Carmex. Yes. Carmex. If it's good enough for Joe Perry it's good enough for everyone else.
@johngonzalez7967
2 жыл бұрын
What was that song you where using? Cool bass line!!
@coreyhaynes2975
2 жыл бұрын
Hit some natural harmonics and dive the bar, that always sounds awesome!!
@phililpb
2 жыл бұрын
reverse headstock puts the string trees on the wrong strings
@hamupinhere
2 жыл бұрын
Shit, it worked. You're the man!
@thebluesrockers
Жыл бұрын
what pickups do you have in that guitar?
@pavelmazalek2838
2 жыл бұрын
I build myself Super Sonic and don't have any issues. Maybe that's why. I preferer shallow angles. So, I put only one string tree with taller washer for E and A and only because I don't have staggered tuners. I also have offset trem system which admittedly doesn't allow such wild bending and Graphtech nut but still.
@60CycleHumcast
2 жыл бұрын
I want to see this guitar.
@pavelmazalek2838
2 жыл бұрын
@@60CycleHumcast I made topic with pictures on OffsetGuitars Forum for this project. Name of the topic is "Super Sonic with Jag/Jazz Vibrato - Left-Handed "
Пікірлер: 254