You may want to clock the index plate clockwise 120 degrees to put the strait line of holes with number circles stamped at the top. Helps with sanity check when you complete a full circle cut and come home to start and stop at the top hole.
@thepowertoact
10 ай бұрын
Hi there, awesome video, glad it's on youtube to show people how these tools work. This is a fairly minor point but what you have here is a super indexing spacer, not a super spacer. A super spacer doesn't have the worm drive handwheel so you can't cut with the mill at the same time that you're rotating, so you can't mill an arc or curve. Very cool to add on the dividing head capacity to the super indexing spacer, that eliminates one of its big weaknesses. Cheers and best regards!
@RJMachine62
Жыл бұрын
I did mine about 10 years ago. It works great. I didn't know Vertex had a kit so I took at chance and bought a kit from Grizzly that bolted right up to my vertex. The large hole thru the center of the vertex comes in handy around here for doing shafts and stuff easier. The segment on the vertex is much nicer than the black steel segment grizzly had, but still functional.
@All_Things_Metal
Жыл бұрын
I’ve go the same super spacer and dividing plate set. Had them for several years now and since getting it I don’t use my old dividing head anymore. This is always on the end of the bench, has the chuck mounted and the dividing plates only take a couple minutes to install. Love it!
@OldIronMachineWorks
Жыл бұрын
Stan, I have the same Vertex as yours. Thanks to this video I now need to order The accessory kit. Had no idea you could buy a kit that just bolted right on. Very cool, thanks for sharing this video. Gary
@DudleyToolwright
Жыл бұрын
Nice find Stan, thanks for sharing.
@aaronkokesch3593
Жыл бұрын
Thats awesome to have the ability to use it as a dividing head and super spacer. Wish I had use for my old Kearny Trecker dividing head. If you know anyone looking for one let me know.
@bcbloc02
Жыл бұрын
Now I am curious how this would work on my rotary table as a retrofit. You gave me food for thought. 🙂
@weldmachine
Жыл бұрын
You might be lucky and find a Vertex kit to suit your Rotary Table ?? IF you have a large Rotary Table 10" (250mm ) or larger the same kit that Stan has here could possibly fit ?? This kit will fit 10" to 16" Vertex Rotary Tables and Both the 6" and 8" Super Spacers. All the best with your retrofit. 👍
@bcbloc02
Жыл бұрын
@@weldmachine it’s a 36” table and it looks close but I think I would need to make a mounting hub. Main thing is I would have to make sure the ratio is the same.
@stephenmorgan8510
Жыл бұрын
Appreciate the video. I inherited a super spacer and some dividing head parts. Until now I had no idea how to install the dividing head parts. I'll be in the shop tomorrow converting mine. I'll still need a chuck and tailback for a working setup.
@sierraspecialtyauto7049
Жыл бұрын
Very nice upgrades, Stan. Thanks for sharing.
@TheAyrCaveShop
Жыл бұрын
Nice setup Stan, Thanks for sharing !
@mabmachine
Жыл бұрын
I was surprised how reasonably priced this option was. Vertex is nice stuff.
@Wintersmachineshop
Жыл бұрын
Man it's nice when thing work out like they should . I'm actually impressed that it didn't need any work to fit , have to check out vertex now . Thanks for sharing 👍
@ScottDube1
Жыл бұрын
Thanks for the info Stan, I have one in the box I haven't gotten around to unpacking! Got my Novus 480 working great btw, thanks for the help!
@ls2005019227
Жыл бұрын
Nice! I've always kinda wanted a super spacer.....but I already have a rotary table with dividing plates (& tailstock), and a dividing head. They felt like additions that I just had to have; but I haven't used either a whole lot.
@AmateurRedneckWorkshop
Жыл бұрын
Very nice tool. I have a rotary table for my mill with all the same stuff including the 90 turn crank.
@RB-yq7qv
Жыл бұрын
Looks very nice I will be looking into one for mine vertex
@petemclinc
Жыл бұрын
I just dug out my dividing head/super spacer I bought at auction 9 or so years ago and don't know the brand. Stan your video has perfect timing as I'm disassembling, removing chips and cleaning. This thing must weigh at least 400 lbs, has a 12" chuck, 17.5" L x 12" W pivoting base that tilts 0 to 90 degrees, 90:1 ratio with plain indexing dividing plates. I bought it site unseen and had no idea how massive it is. I'm hoping to use it on my Bridgeport to cut gears. Definitely going to need the engine lift to mount it on the table if it will fit. If anyone knows what make this could possibly be, please reply with a comment. I would consider selling it and getting something more manageable.
@camojoe2
Жыл бұрын
Nice bit of kit there Stan. Regards, Duck
@404BYTE
Жыл бұрын
I believe it came with T-slot face plate and different masking plates when purchased brand new.
@floridaflywheelersantiquee7578
Жыл бұрын
Nice tool thanks for sharing
@weldmachine
Жыл бұрын
VERTEX, definitely make some nice equipment. Very well made at a price that is reasonable considering the Quality you're buying 👍
@malcolmtill
Жыл бұрын
I believe the hole plates are double sided ie with two plates you get four plates worth of hole patterns.
@joandar1
Жыл бұрын
Vertex is high quality in my book. Perhaps no Keys for tailstock so you make them yourself to suit the Tee Slots of the Machine that you intend to use it on. John, Australia.
@JohnBare747
Жыл бұрын
The parts fit up slicker than deer guts on a doorknob. Satisfying when something actually fits like it should.
@ShadonHKW
Жыл бұрын
I agree, who knows what it would have been like with a cheap knockoff set.
@JohnBare747
Жыл бұрын
@@ShadonHKW All burrs and random swarf.
@vettepicking
Жыл бұрын
Got the the same unit for 175 at a auction. They are over $1k new
@richardellis3141
Жыл бұрын
very nice
@BROCKWOOD64
Жыл бұрын
Never heard a complaint about Vertex. Enjoy!
@pilgrimm23
Жыл бұрын
sweet
@jimpritz4169
Жыл бұрын
Very nice. Are the dividing plates double sided with holes on each side?
@ShadonHKW
Жыл бұрын
Yes, they have holes on both sides.
@duanedickey7043
Жыл бұрын
Is there non genuine Vertex?
@ShadonHKW
Жыл бұрын
Probably, ya never know these days.
@weldmachine
Жыл бұрын
Non genuine Vertex, Chinese versions are available. Not sure about accuracy ?? But, you know how that goes ?? You Get What You Pay For 👍
Пікірлер: 38