I was looking fo cardboard plywood and Im glad I found this.
@mrdhksan
7 ай бұрын
A great hands-on explanation of structural engineering. Thank you.
@user-ku8nn3ln8s
2 жыл бұрын
All cardboard crafters should take engineering 101. Thanks.
@MariaRamirez-jm3cj
3 жыл бұрын
I just found you! I am so happy I did! My only regret is that I found just one video. Could you please do a ton more? Just kidding! Perfectly explained, a lot of great information and precise demonstrations! Of course I signed and I pressed the bell. 👍👍👍👏
@DIYDalia
2 жыл бұрын
this is so interesting! Wish there was more :)
@faebrowne2537
2 жыл бұрын
So wait a minute! Why have I only just found you?!! Excellent video. So informative. I will never under estimate a triangle again! New sub 👍
@conniepappas2095
5 ай бұрын
Hey! I just found your channel.. It's great! I have subscribed. You're very good teacher. And You're informative and interesting. I'm so excited I've discovered you on youtube.
@OLDCHEMIST1
5 ай бұрын
Thank you very much for such a helpful video! Best wishes to you from the UK!
@OneKindWord
5 ай бұрын
Excellent content.
@abhishekag6927
2 жыл бұрын
best cardboard craft tutorial i have ever seen
@sapphirejones7302
Жыл бұрын
Love this! Thank you.
@sierraecho884
Жыл бұрын
Basically that´s what IKEA does with most of it´s furniture just on an industrial level. This example is pretty good. You can coat the whole thing with shellac at the end and make it really strong and sturdy and also sand and paint it, so you can even make real furniture out of it and nobody would be able to tell it is not just painted cardboard.
@donmjurczelllo6428
2 ай бұрын
That is 70% sure mate. I am a cardboard designer and work with different cardboard thickness you have a wide range to choose from called b 3mm , e 1.5mm , EB flute 4.5mm thick. Boxboard from around 0.8mm to like 0.38mm and below that is like paper and many more. To each material you work to thickness. Basicly it is very interesting what you can get out of cardboard engineering is using mainly in a temporary display for a promotion product but also in the shop front window display could be high end or just standard retail. Furniture will not last long in every day usage all the pends of finishing off. Trust me. So IKEA is using card based designs but a bit more engineered and so it last for long and prepared for mass production more likely cheaper than anything else. whatever.
@donmjurczelllo6428
2 ай бұрын
And yet the print finish could be or can be stunning.
@sierraecho884
2 ай бұрын
@@donmjurczelllo6428 Yes, sure.
@sierraecho884
2 ай бұрын
@@donmjurczelllo6428 Yes I know. They use it as cheap material and coat it with foils so it does not absorb too much moisture. It also does not have to hold much or long. And you rarely use a shelf really, most of the time it just sits there. Cardboard is awesome stuff. I am an automotive design engineer so we work with plastic and sheet metal mostly, obviously for completely different applications, safety is relevant, flammability and so on. But none the less cardboard is awesome.
@alexanderruedagarcia1662
2 жыл бұрын
Nice work. Thank you for the explanations. My students will now build some cardbaord furniture. Arigato.
@Sliverstormcreations
2 жыл бұрын
great video please continue to make more
@alexgehales
3 жыл бұрын
Great video David
@saintsithx
2 жыл бұрын
Dude youre osom! Thanks for the knowledge, greetings from chile.
@simonrock4749
2 жыл бұрын
Realy good tips thx so much ^^
@kieshaannpetersen9854
Жыл бұрын
Great video, thank you so much 🌹
@echo6sierra
2 жыл бұрын
Nice video. Quick tip. Always run your cardboard in the same direction. Use a PVA glue vs hot glue. Titebond II or III are great products.
@hunterwittman1057
Жыл бұрын
Very helpful, thanks!!
@tashashouse
3 жыл бұрын
Thank you very much!
@driveramd12
Жыл бұрын
Dave, you are freaking awesome! Do you mean creating "Honeycomb structures strengthening the structure?"
@deerich4288
Жыл бұрын
Great idea
@Tessa-oi3ic
4 ай бұрын
For the flat sheets, what would happen if I bonded all the sheets...THEN cut them with woodcutting tools? Would the sheets delaminate or catch on the saw? For that, I would probably use a different adhesive so that the adhered surfaces would be uniform in texture and thickness.
@Use-Your_Brain
7 ай бұрын
3M can't spray glue would probably work better and so would wood glue and you could even water down the wood glue to make it more quantity
@albertabd3206
Жыл бұрын
Thank you. Could you make the version without a glue by hooks?
@stanimatorblue
Жыл бұрын
Can you design a ramp using triangles that can support the weight of a car?
@souadthn
2 жыл бұрын
Good
@dopapier
9 ай бұрын
Really good sense. Adding a layer of packaging paper with a good paste (cellulose plus PVA) improves the appearance and adds greater strength. A presentation suggestion - an occasional smile would enhance the delivery! Remember, it’s FUN.
@quinnm.3127
Ай бұрын
thats inappropriate to comment on someone smiling or not based on what /you/ want. you can tell they are good-natured and enjoying themselves, so back off.
@eaman11
11 ай бұрын
that is not durable you are gluing just surfaces that after a while will delaminate, also you are using thermic glue that other than being not environmental friendly is harder than the cardboard and rigid so you are having and harder body pulling - stretching a soft cardboard surface...
@nunc-hic-stans4211
2 жыл бұрын
Nothing on this is "super" nor "thought" nor "perfectly fitted" nor "engineered", very poor work.
Пікірлер: 39