Just did it, with my brother. Took about an hr. You don’t have to take those arms off completely. Just hold the wheels with other jacks and push them up just a little to realign the new bolts.
@drd1924
Жыл бұрын
Thanks for the vid, helped much!
@SuperATVMedia
Жыл бұрын
Glad to hear it!
@ridingrodney3259
3 жыл бұрын
I love your products and work great service thank you
@brianwinseck687
4 жыл бұрын
I did not do it but what a waste to remove tires and control arms completely.
@KmLLegenD
4 жыл бұрын
Didn’t mention anything about the spacers for stock radius arms. Had it all done and realized I had spacers left. Drill size you mentioned is also too small.
@SuperATVMedia
4 жыл бұрын
In this video the machine has our boxed high clearance radius arms. When installing a ours or stock everything goes back in place how it was in original form our bumper just replaces the backing plate on the machine. 11/32" drill bit will work for provided 10mm hardware.
@brianwinseck687
4 жыл бұрын
@@SuperATVMedia 11/32 =. 34" 10mm=.39". The drill size will will not work.
@brianwinseck687
4 жыл бұрын
@@SuperATVMedia and the spacers are not need for stock arms, just reuse stock bolts
@tylerhardy8128
4 жыл бұрын
Do you have to remove radius arms for install?
@tylerhardy8128
4 жыл бұрын
And I mean stock radius arms by the way
@tylerhardy8128
4 жыл бұрын
Also what do you recommend to cut exhaust plate
@SuperATVMedia
4 жыл бұрын
You have to at least remove the inner portion of the radius arms.
@MrCovain
4 жыл бұрын
Can a hitch be used with this bumper?
@SuperATVMedia
4 жыл бұрын
Our hitch is not compatible with this bumper.
@mbozick
4 жыл бұрын
Where can I get a drill guide?
@SuperATVMedia
4 жыл бұрын
They come with the purchase of our bumper.
@BlackLabelSXS
4 жыл бұрын
@@SuperATVMedia no they dont either just got mine for the 2014 xp and no guide to be found
Пікірлер: 19