Do you want to increase the boost pressure that the Eaton M90 supercharger produce?. This video will show you how to install a Hub that will allow the interchange of difference pulley size to help increase boost pressure. This Hub and set of different light-weight pulley can be purchased at www.3800performance.com. To create more boost from the supercharger will increase stress and fatigue to its rotor bearing. always check and service the supercharger oil by using ester-oil ONLY. Never substitute engine oil or any other oil for supercharger lubrication, ALWAYS use the oil that the Dealer provide.
Increasing the boost of the supercharger(roots blower) by spinning it faster will increase the outlet air temperature. This will lead to engine detonation and damage. Increasing the boost of the supercharger will require a liquid-intercooler sandwich between the intake manifold and the supercharger to reduce air temperature and maintain high boost pressure. If a liquid-intercooler can not be fitted to you supercharger applications, the ECU must be recalibrated for addition fuel to quench the detonation from hot air produce by the blower. Also the ignition spark timing will be to be alter to prevent engine knock(detonation) also know has "ping". Messing around with supercharger without the proper knowledge will lead to damage blower and engine.
How to Remove factory OEM Supercharger pulley. • How to change Supercha... . part 1/3
thank you.
Please 👍, Comment, Share, Subscribe and learn automotive.
Best wishes and good luck.
Join us at RUMBLE.com. rumble.com/vo9...
Негізгі бет Supercharger Pulley Swap. Part 2/3.
Пікірлер: 1