Hello super pro. Nice product!. I have change my suspension from OEM with olhins coilover, which has brought the car lower (min cooper R56), I have put some whiteline adjustable enlink in front but for some reason the link keep unlocking itsellf when the wheel is fully turn. The ball joint rotation arrive at it full rotation and the wheel still have some degree of rotation that the link can only compensate by unlocking it self from the conter screw. I wonder why? Is it because the ball joint doesn't have enough degree of rotation? is it because the link is too short or too long ? if car is lowerd should i also shorten the link ? or increase the length ?
@wallmethod
5 жыл бұрын
What do you mean “Ball end” spot on? Then must be on the correct length? The Orientation of the Ball ends have absolutely nothing to do with the length.... Now we are confused... Question? Are the Ball ends “twistable?”
@SuperProSuspensionParts
5 жыл бұрын
The ball end is at either end of the link this is the part with boots. The length is from centre of ball to centre of ball . Yes, the ball ends can twist. Please reference this document: www.dropbox.com/s/yu3xdstpee8mfwn/TRCLINKKITIS.pdf?dl=0
@grassyfieldz4578
4 жыл бұрын
@@SuperProSuspensionParts At 1:30 I don't see why you would need to have the the ball joint straight even if you installed it at an angle wouldn't it self adjust to where its meant to be after turning the steering?
@SuperProSuspensionParts
4 жыл бұрын
@@grassyfieldz4578 No, it wont self correct after installation. The ball joint has to be level at ride height (when the the wheels are on the ground). You can however install at an angle as long as at ride height the sway bar link pin is level as per figure one: www.dropbox.com/s/yu3xdstpee8mfwn/TRCLINKKITIS.pdf?dl=0
@guillermoavila5797
4 жыл бұрын
Does the bushing part (the rubber) has to be greased?
@anthonyanthony6213
5 жыл бұрын
When I bought mine. Nothing came in the package. No instructions. No middle piece. Car is 2004 Toyota Kluger. Got part#trc4004lnk. Stock ones are shorter. Bought them from Autobarn.
@SuperProSuspensionParts
4 жыл бұрын
Hey Anthony, who did you purchase from? Also have you contacted our support team about this as instructions should of been included in your purchase.
@davedaraver32
6 жыл бұрын
is there a link to the second video out at all please. cheers
@SuperProSuspensionParts
6 жыл бұрын
We are working on the second video at the moment :)
@rangeend5773
6 жыл бұрын
Could made a video step by step replacing an Sway Bar? And if you could do to an Australian car!
@SuperProSuspensionParts
6 жыл бұрын
Sure thing we will look at doing it :)
@rangeend5773
6 жыл бұрын
SuperPro Suspension Parts of you Ok great to hear! And maybe look at doing something with Mighty Car Mods because of how many views they have.
@SuperProSuspensionParts
6 жыл бұрын
We just finished doing a sway bar link installation video, check it out kzitem.info/news/bejne/2oSQnHWAoXyeiY4
@realnuff1law706
4 жыл бұрын
How long these last compare to oem ones?
@SuperProSuspensionParts
4 жыл бұрын
They should last forever, but it depends on how you use them.
@realnuff1law706
4 жыл бұрын
@@SuperProSuspensionParts 👍thank mate , lookin forword to it
Пікірлер: 17