Hey Mark, It’s just about time for an update on the IATs you’ve been experiencing. I, for one, am curious. 👍🏾
@elvis_chen
2 жыл бұрын
The official test from VelossaTech is impressive, look forward to your test results!
@spiguyversgarage9452
2 жыл бұрын
I will let you know what I find!
@kevin-jm3qb
Жыл бұрын
was it worth it after doing all that to the car?
@spiguyversgarage9452
Жыл бұрын
Still not sure. It doesn’t hurt, but not sure I can say it helps either.
@AR_4Foglio
2 жыл бұрын
Great job brother. I like the whole concept and the install isn't really bad. I would prefer having the snorkeling pipes black in color and less visually noticeable throughout the front grille. May you please provide the link where you got the part from? Thank you in advance and keep us posted with the AIT results!
@spiguyversgarage9452
2 жыл бұрын
These are available in a variety of colors, including black.
@MustafaAli-85
2 жыл бұрын
Beautiful video mate , installation seems straight forward... little bit of cutting but it cleans out good. Looking forward to see the result .. loved your channel btw .. subscribed 👍
@spiguyversgarage9452
2 жыл бұрын
Thanks man, I appreciate the support!
@MFGhost1992
2 жыл бұрын
Hmm been debating on if I should get this. Definitely might try it out now.
@spiguyversgarage9452
2 жыл бұрын
I'll let you know what I find. Let's see if it delivers on the expectation!
@DonnieB519
2 жыл бұрын
Content was right on par. Just lower the sound level on the background track while you’re talking. All and all the video was good. Just needs a little polish :) Keep up the great content, brother 👍🏻
@spiguyversgarage9452
2 жыл бұрын
I appreciate the feedback, and I'll continue to work on making them better. I have an entire SD card full of garbage clips from this weekend!
@gregg8177
2 жыл бұрын
Thanks for the video. Look forward to the results when you have them! Not sure I like the red color but let us know about the IAT's.
@spiguyversgarage9452
2 жыл бұрын
It comes in a lot of different colors.
@gregg8177
2 жыл бұрын
Would also like to understand the impact on the trans cooler as it seems to block airflow to that as well. I had one of these on my Focus ST and liked it but it did not interfere with cooling like this one could for the Supra. Thanks again.
@spiguyversgarage9452
2 жыл бұрын
I will keep an eye on it. Probably more of an issue if you track the car.
@corykwock3727
11 ай бұрын
Would this be an issue when it rains
@spiguyversgarage9452
10 ай бұрын
has not been so far.
@thedrunkenredneck4898
2 жыл бұрын
Will this only connect to stock air box?
@SpiguyverBackpacking1
2 жыл бұрын
No, mine is connected to my MST intake box.
@edwint1780
2 жыл бұрын
An A for effort but I am super skeptical about this plastic thingy. Highly doubt it will make any difference to the engine's performance. I think the biggest difference would be by figuring out how to keep the charge pipe from getting heat soaked. By the time the air travels through that whole system and goes through the hot charge pipe and gets into the intake manifold, it will be hot, regardless whether or not the origin of the air was made a bit cooler by using this snorkel. And the RAM effect doesn't work on this highly computerized, modern cars. The ECU will keep the AFR whatever it's set to be regardless of how much extra air you attempt to ram in there.
@spiguyversgarage9452
2 жыл бұрын
Completely get all you're saying, which is why I wanted to get one and run some real world testing and be able to report back to everyone what I got for results. Not going to sugar coat any results. I got a discount on it, and figured it was worth giving a shot, I've paid more for less!
@LoLPhuocDat
2 жыл бұрын
Looks like you switched your front lip from the rexspeed(?) to the maxton v2! How come the switch? I’m new here so I may have missed the explanation. Did you end up going gloss black finish on the maxton lip? And could you link me where you got those wind buffeting solutions ? The CF on them looks 10/10!
@spiguyversgarage9452
2 жыл бұрын
I went with the full Maxton set in gloss black. I didn't like the look of the carbon on the lip, and especially since I was doing the full package, lip, side skirts and spats.
@suprola7961
2 жыл бұрын
Where’s the follow up? Anything noticeable?
@spiguyversgarage9452
2 жыл бұрын
I don't know. It's very hard to tell. Our IAT isn't at a point where it's really going to tell you.
@suprola7961
2 жыл бұрын
@@spiguyversgarage9452 I’ll have to get mine installed. It’s still in the box.
@Jesusprayerwarriorbw
2 жыл бұрын
Get a inner chiller , CSP runs them . Tank installation gets IAT at 20 degrees Fahrenheit
@spiguyversgarage9452
2 жыл бұрын
Running the meth that I have on it should be reducing the actual intake temperature quite a bit.
@thomasjones3384
2 жыл бұрын
Is it possible to get the red plastic parts a black? Is it possible to wrap certain parts with aluminum foil outer insulation inner wrap to prevent the heat penetration?
@spiguyversgarage9452
2 жыл бұрын
Yeah, all the parts are available in different colors
@alcorsi1968
2 жыл бұрын
Very interesting to see how it works out? Can I ask if you have changed the horn? Mine sounds pathetic! Btw I enjoy your videos. 👍🏻
@spiguyversgarage9452
2 жыл бұрын
I regret that I did not take the opportunity while the bumper was off to do that. I can tell you that I have NEVER honked this horn, I have no desire to hold that regret!!! LOL
@BoostleakTV
2 жыл бұрын
Hey man, any update on data collected?
@spiguyversgarage9452
2 жыл бұрын
It's really tough to say due to where the IAT is taken. But really haven't seen much difference.
@markbarry7861
2 жыл бұрын
Interested to see what type of gains you see.
@spiguyversgarage9452
2 жыл бұрын
I think it's going to be hard to tell until it gets warmer out.
@_austind
2 жыл бұрын
What tool do you use to cut into the shroud? That’s the only part that makes me contemplate doing this or not lol.
@spiguyversgarage9452
2 жыл бұрын
I started with a rotozip that I have, but it didn't fit in there well, I actually did most of it using a hacksaw blade and just doing it by hand.
@_austind
2 жыл бұрын
@@spiguyversgarage9452 looks great! Looking forward to the test results.
@spiguyversgarage9452
2 жыл бұрын
Thanks! I appreciate you checking it out!
@matts9216
2 жыл бұрын
Do you have a downpipe yet with the jb4 tune?
@spiguyversgarage9452
2 жыл бұрын
Yes, I'm running the AA Catted DP.
@matts9216
2 жыл бұрын
Have you got to dyno the car or do a 1/4 mile run since getting the tune?
@spiguyversgarage9452
2 жыл бұрын
No, but I will have some data in about a week that I can post up. Meth kit installation should be finished up today and we'll be working on the tune this week.
@matts9216
2 жыл бұрын
@@spiguyversgarage9452 nice!! Looking forward to that video
Пікірлер: 49