Just bought this same engine and found it impossible to raise it after lowering. Read the manual over and over and nothing worked. I finally googled can't raise Suzuki 2.5 hp outboard and your video came up. Turned the nut 1/4 turn and it solved the problem. I don't think I would have thought of that nut as the culprit and would eventually given up. Someone should notify Suzuki of this problem because it must be much more common than just a few. Again thanks for the solution it it was a lifesaver.
@KonkanFishing
10 ай бұрын
Glad this video helped! Thank you so much for watching and commenting. That is a fine motor and I have had great fun with it. Wish you all the best with it. Happy boating!
@roberteller4165
2 жыл бұрын
i just got one and could not get it tilted. thanks for your help! good fishin from seattle.
@KonkanFishing
2 жыл бұрын
Thank you! Glad I could help. I'm fishing with an angler from Seattle here on the West Coast of India. He's doing pretty good on the barramundi here from the shore. Let me upload some videos of me fishing with him soon in my channel.
@kavintheboss21
4 жыл бұрын
Can't wait to see you in action with this companion :) Please plan a trip soon and post more videos. Looking forward.!!!
@KonkanFishing
4 жыл бұрын
Thank you and I'm going to put this rig to good use 😊👍
@holistic1966
2 ай бұрын
HI Buddy please share your purchase details of Suzuki 2.5. Do you need a liscense to use this boat? Regards Abhinandan
@chrisgardner6677
3 жыл бұрын
Mahalo! I love my Suzuki 2.5 but I do recommend turning 'off' the fuel valve so you burn all the fuel off since the carburetor is very small & can get 'gummed' up!
@KonkanFishing
3 жыл бұрын
Thank you! That's a good suggestion 👍
@Si1234321
Ай бұрын
Excellent! Saved me a lot of time working out why the bracket won’t tilt. Thank you!
@MDCREATIONS007
4 жыл бұрын
Waiting for the videos😍😍😍😍😍😍
@KonkanFishing
4 жыл бұрын
Thank you bro! New videos are coming soon 😂🙏
@fortgrigsby9443
2 ай бұрын
I am completely new to boating. Your video was awesome. Thank you so much
@peteguild8833
2 жыл бұрын
Thanks for the tip on the tilt!!!
@KonkanFishing
2 жыл бұрын
Happy to help!
@tpyi
3 жыл бұрын
Thanks for the tip on the tilt! Mine was extremely difficult at first, until I loosened that nut. Love the outboard, it's quiet, light, and moves my Pelican Catch PWR 100 kayak with ease.
@KonkanFishing
3 жыл бұрын
Glad it worked 😊 I never thought about that nut myself for a while and then at one point it hit me. It is a great outboard if you're using it for what it's meant to do. I wish I had a kayak, but may be one day 😊
@abhinandannath8904
2 ай бұрын
Hi buddy please share the purchase contact of this motor Thanks
@走進東方的時空
3 жыл бұрын
Thanks for the tip on the tilt! It frustrated me for a year until I loosened that nut a little bit.
@KonkanFishing
3 жыл бұрын
Glad this video helped and thank you watching and commenting 😊
@nasirshukor9408
2 жыл бұрын
thanks sir , help me to fix the tilt issue !
@KonkanFishing
2 жыл бұрын
Glad to be of help here. Thank you for commenting!
@Canuck403
Ай бұрын
What position to put choke in when starting ? And runnning please.
@kenstankiewicz6405
3 жыл бұрын
I love how you tested it on a high rise apartment balcony. I’m looking at the same motor. Hope it works out for you.
@KonkanFishing
3 жыл бұрын
Thank you and it's a nice motor. I just moved to the shore and I'll be using it more often now in the backwaters. Will try to get more videos of it.
@Tekagi1001
3 жыл бұрын
I have this motor too, worth every penny
@KonkanFishing
3 жыл бұрын
Yes it is
@roninglis3286
11 ай бұрын
Same motor. Problem with tilt lock not holding the engine up. Somehow the silver tilt lock lever had become bent. I may have hit a rock? Took off the bolt that retains that lever, put it in a vice and straightened the J Curve until it fit flush in the mount again. Tricky getting the little spring back on, but now it locks again when raised. Adjusted the tilt friction as suggested in this video. All good. Thx!
@KonkanFishing
10 ай бұрын
Glad this helped. Thank you for watching and commenting!
@rahulmalharkar82
4 жыл бұрын
wow buddy ..... slay some monsters ....... I can already see ur channel reaching that milestone of 10 k really soon ..... tight lines Maruthi
@KonkanFishing
4 жыл бұрын
That's so nice of you to say that. Thank you for believing that. I'll try my best 🙏
@Dechkaon
Жыл бұрын
Thanks for this video. It helps a lot. I just bought same motor yesterday and learned a lot from your video
@KonkanFishing
Жыл бұрын
I'm so glad this video helped. Thank you for watching and commenting. It's a great motor. I hope that you have a good time on the water with your adventures 👍
@antonioortiz4544
3 жыл бұрын
Nice. Thank you. I have the same outboard. I'm having a gas leak and I don't know why. I tried tightening all the tubes and it still leaks.
@KonkanFishing
3 жыл бұрын
I don't have any leak. How old is yours? I turn off fuel and tighten the air vent before I tilt the motor, while I transport and store the motor. I turn the fuel and the air vent is on, just before starting the engine and turn it off when I'm back at the shore before tilting and/or removing the motor from the transom.
@dmac7458
Жыл бұрын
Thank you soooo much for showing me how to adjust the tilt. I spent 3 hrs on it until I watched your video and with a half turn on the correct bolt, it freed up the tilt. Thanks. Dan
@KonkanFishing
Жыл бұрын
Glad this video helped Dan. Thank you for watching and commenting. Happy boating :)
@daveb7999
Жыл бұрын
Thank you for the tips! I have this outboard and use it on a square stern, aluminum canoe. This motor is the perfect size for this and I love how quiet and easy to start it is. Best of luck in your backwater fishing! Great video and very nice outboard, we love it.
@KonkanFishing
Жыл бұрын
Thank you Dave! Had a blast in Goa/Goakarna with this rig. I just moved to Ireland. Will probably get a good Kayak here and see how I fare with it. Thanks again for watching this video and commenting. Happy boating!
@kalaiarasannagarajan2633
4 жыл бұрын
Congrats buddy moving to next level of fishing.so happy for you maruthu.all the best 👏👏👏👏
@KonkanFishing
4 жыл бұрын
Thank you so much 😊🙏
@DixieNormous1
Жыл бұрын
Thanks for the help! just got mine a little bit ago and I couldn't get it tilted it up either, till I loosened that nut
@KonkanFishing
Жыл бұрын
Thank you for commenting! So glad this video helped.
@NinoSpinner
3 жыл бұрын
Si può andare a marcia indietro girando il fuoribordo al contrario? O entra l'acqua dallo spruzzo dello scarico raffreddamento?
@naveenraj9518
4 жыл бұрын
Excited to see you soon on it bro...😃
@KonkanFishing
4 жыл бұрын
Soon bro 👊
@davidscott3781
2 жыл бұрын
Just rescued us from being stranded in Croatia thanks
@KonkanFishing
2 жыл бұрын
Glad this helped. Thank you for commenting! 🙏
@779RosaPhilipovna
Жыл бұрын
Thank you for your helpful video! The nut was tight on mine also. So, I have loosened the nut, but I still can’t get it to tilt UP. For tilting UP, must I press a tiny silver lever while also pulling the motor up at the same time? Or can it get tilted up without pressing any lever? Thanks.
@KonkanFishing
Жыл бұрын
You need to lift that lever before tilting up. I guess you must have figured that out by now anyway. Sorry about the late response. I was traveling a bit and haven't checked the messages in a while. Hope this helps.
@779RosaPhilipovna
Жыл бұрын
@@KonkanFishing thanks yes
@tamilangler
4 жыл бұрын
Wait to see ur boat fishing videos bro...
@KonkanFishing
4 жыл бұрын
Thank you 😊
@suhail.akhtar77
4 жыл бұрын
Awesome ... Best of luck. Hope you catch lots of fish..👍
@KonkanFishing
4 жыл бұрын
Thank you 😊
@affanbondre9681
2 жыл бұрын
Can you please say what is the price for this engine and is it sutaible for 20feet fibre boat
@KonkanFishing
2 жыл бұрын
You can use it on a 20' fibre boat as long as it is one of those narrow ones less than 3' wide. I paid a little over 50K INR for this motor.
@bostjan9092
3 жыл бұрын
Good advice... I have the same issuse ... thanks
@KonkanFishing
3 жыл бұрын
Awesome! Glad I could help and thank you for commenting 👍
@blesson87
3 жыл бұрын
Almost dropped it there right at the end... dintcha 🤣lol
@KonkanFishing
3 жыл бұрын
Lol! I almost did 😁
@vinodrm
4 жыл бұрын
Maruthu... Congratulations 👏 tight lines 🎣👍
@KonkanFishing
4 жыл бұрын
Thank you buddy 😊
@kishoc
4 жыл бұрын
Nice outboard engine. Hope to see you with big boat in deep sea soon. :)
@KonkanFishing
4 жыл бұрын
Thank you! I'll not be taking this to the open ocean, but will be doing a lot of fishing on the backwaters. Let's see how this turns out.
@AndrewMarsden-k3h
9 ай бұрын
Thank you I had the same tilt issue and resolved it thanks to your help!.
@KonkanFishing
9 ай бұрын
Glad this video helped. Thank you so much for watching and commenting!
@arunbmohan
4 жыл бұрын
Good work Maruthu 😍😍waiting for action 👍👍🎣
@KonkanFishing
4 жыл бұрын
Thank you 😊
@abelhoul
9 ай бұрын
Excellent video thanks
@KonkanFishing
9 ай бұрын
Thank you!
@fishinglife123
3 жыл бұрын
Such a good video bro... Really help to beginners..like me.....😀😀🔥🔥🔥
@KonkanFishing
3 жыл бұрын
Thank you and I'm so glad 😊
@fishinglife123
3 жыл бұрын
@@KonkanFishing 👍👍
@yklau009
4 жыл бұрын
Nice video, can't wait to see the motor on your boat. Quick question though, can you run fuel directly from an external gas can with a hose or fuel line to the motor?
@KonkanFishing
4 жыл бұрын
Thank you! No, you can only use the inbuilt tank
@kenstankiewicz6405
3 жыл бұрын
Actually there is a mod on KZitem that shows everything you need to add an external gas tank.
@OmisFishing
4 жыл бұрын
Congratulations Maruthu! Hoping to see some good fish caught on this setup! Always, safety first too!
@KonkanFishing
4 жыл бұрын
Thank you Om! We'll be taking it out for the first time this Sunday (Annette's birthday). Yes, will be wearing life vest all the time onboard.
@OmisFishing
4 жыл бұрын
@@KonkanFishing Awesome! Wishing you both many more happy returns (in advance :))
@KonkanFishing
4 жыл бұрын
Thank you buddy!
@74nova36
3 ай бұрын
I like your style brother. You almost dropped the motor at the end and it was awesome lol
@ralstonborges14
4 жыл бұрын
Awesome Bro.... Can't wait to see you land some fish with a boat
@KonkanFishing
4 жыл бұрын
Thank you! I'm off to the shore this weekend for a week and hopefully land some nice fish on this trip 😊
@ralstonborges14
4 жыл бұрын
@@KonkanFishing make sure the GoPro is on😉
@KonkanFishing
4 жыл бұрын
@@ralstonborges14 haha! I will for sure 😁
@suntand
2 жыл бұрын
Hey buddy. Nice video. Could you let me know the price and from where you bought this machine?
@KonkanFishing
2 жыл бұрын
Thank you! I bought this in Pondicherry from Ram. His contact number is +919790475537 ... Hope that helps!
@vrr2201
4 жыл бұрын
All this time the frikking chair was in front of me and I didn't get the idea to mount the motor on it until I watched your video lol.
@KonkanFishing
4 жыл бұрын
Just make sure there is enough counter weight on the chair, or the motor can fall 😊
@vrr2201
4 жыл бұрын
@@KonkanFishing I am thinking the other way. Cut a hole on the chair and put a tall bucket with water through it. That way it also can act as a counterweight when you wanna tilt it up the other way.
@KonkanFishing
4 жыл бұрын
@@vrr2201 gotcha now. That'll work 👍 Thank you for watching and commenting 😊 Waiting for the monsoon to pass through, which should be in a couple of weeks and I can get some good use out of this motor on my Intex Mariner 4 inflatable raft 😊
@Fajah69
2 жыл бұрын
Dude are you living in a condo?
@KonkanFishing
2 жыл бұрын
Yes I do 😊
@crystalhd3696
4 жыл бұрын
hi im the one who is coming to karwar this is my acount that one was my mothers and i will tell you about the contact when we are sure that ganna come and everything is planned
@KonkanFishing
4 жыл бұрын
Cool! Thank you for the invite and I'm looking forward to hearing from you soon on the trip 😊
@crystalhd3696
4 жыл бұрын
@@KonkanFishing wanted to come this summer but due tightlines couldt.because tight... are not sure when we would come but trying our best.
@KonkanFishing
4 жыл бұрын
@@crystalhd3696 it's not urgent. Whenever you can get there 😊
@crystalhd3696
4 жыл бұрын
@@KonkanFishing ok then
@vishakhasingh8769
4 жыл бұрын
Would you like to join us if we come in the future to karwar
@KonkanFishing
4 жыл бұрын
That'd be awesome and thank you for the invite. Once the rain passes I'll try to visit. How do I contact you?
@vishakhasingh8769
4 жыл бұрын
I dont live in karwar i live in vishakhapatnam but might visit in the next 5 or 6 months evan during these times as its a naval area and living in the naval mess should be safe.we thought of doing this because there is plenty of space inside of the naval area to fish. And also i will tell you about the contact in a future video or mabye in this video in the future because i am in school but this was my dads idea and i love your videos
@KonkanFishing
4 жыл бұрын
Thank you and I'm glad that you love my videos! Please keep me posted on the trip 🙏
@vijaykumar-ux8cg
3 жыл бұрын
Good explanation. Thank you
@KonkanFishing
3 жыл бұрын
Thank you 🙏
@vijaykumar-ux8cg
3 жыл бұрын
@@KonkanFishing i am exploring what to buy 2.5 hp or 3 hp for better speed. The boat i want to use as emergency rescue purpose since a drowning accident happened earlier. Could you give your opinion
@KonkanFishing
3 жыл бұрын
That depends on the recommended power for the motor for your watercraft. I don't think there'd be a big difference between 2.5 hp and 3 hp, but get something that's reliable like a Honda, Suzuki, Yamaha and such
@gokulvarmank
3 жыл бұрын
Hi Sir, Could you tell me where you bought the OBM ? Also what is the weight of this OBM ?
@KonkanFishing
3 жыл бұрын
Hi, this motor weighs about 14 Kilos. I bought this from Mr.Ram in Pondicherry. You can contact him at +919790475537
@gokulvarmank
3 жыл бұрын
@@KonkanFishing Thanks!!!
@sufyans7061
3 жыл бұрын
may i know the price of that outboard engine and a dealer location where i can buy it from
@KonkanFishing
3 жыл бұрын
Yes, I paid around 50K You can contact +919790475537
@TheVishalkaranjekar
4 жыл бұрын
Could you please let me know what's the price of this and where can I buy it?
@KonkanFishing
4 жыл бұрын
I bought this in Pondicherry for around 50 thousand rupees
@ttxxdd
3 жыл бұрын
hi! is this the short shaft motor? I'm trying to decide on short or long shaft
@KonkanFishing
3 жыл бұрын
This is the Suzuki DF 2.5. I'm not sure if there is an option with getting them in long/short shaft.
@NinoSpinner
3 жыл бұрын
Che secchio hai usato?
@KonkanFishing
3 жыл бұрын
Era più di un barile
@urtypicalguy
3 жыл бұрын
Hi, this is a dumb question but when I put it in idle for the first five minutes of starting it cold, what does the idle look like on the throttle handle? Is it the picture that resembles the symbol of the choke? Or do I just leave it in the start position (between the speed and choke symbol)?
@KonkanFishing
3 жыл бұрын
Just leave it in the lowest throttle and in neutral. That's idle 😊
@urtypicalguy
3 жыл бұрын
@@KonkanFishing I'll try it today, thanks!!
@KonkanFishing
3 жыл бұрын
Cool man 👍
@amolbhoir1704
3 жыл бұрын
Hi sir,,how many price
@KonkanFishing
3 жыл бұрын
50K rupees
@nitinmore623
3 жыл бұрын
How much does it cost?
@KonkanFishing
3 жыл бұрын
I paid about 50K rupees
@OnlineUnbox
4 жыл бұрын
How much does it cost you?
@KonkanFishing
4 жыл бұрын
Around 50K
@vishakhasingh8769
4 жыл бұрын
What do you think about the fishing in karwar
@KonkanFishing
4 жыл бұрын
That stretch all the way down till Kumta is good for fishing.
@vishakhasingh8769
4 жыл бұрын
What about the whole naval area with the break waters,rocky areas and the wave less beaches and boat jetties
@KonkanFishing
4 жыл бұрын
Those places should be good, but I wonder if they'll allow anyone to fish there.
@vishakhasingh8769
4 жыл бұрын
Don't worry I've already taken care of that
@KonkanFishing
4 жыл бұрын
Then you should have a great time fishing those pristine waters 👍
Пікірлер: 137