My 2000 Bandit 1200S has been in storage for 11 years.Time to get her out and back on the streets!!
@roywolgenwolgen4978
Жыл бұрын
Is it out allready?
@ZubairAli-tg7ug
4 жыл бұрын
Better looking than most new street fighters
@captnhook236
8 жыл бұрын
oh damn round 2 turned out pretty damn nice as well. Sweet and glad it's alive again.
@isae78080404
5 жыл бұрын
One of the best sf bandit I've seen. Well done!!
@froudster
5 жыл бұрын
Thank you.
@martynrichards6703
7 жыл бұрын
Thanks for the info Steve, will try & source one & see how I go. Cheers!
@96t5wagon
12 жыл бұрын
the satin black stig helmet is icing on the cake
@ZackBasson
9 жыл бұрын
I need a wallpaper of that! Amazing man. Sooooo getting myself one someday
@froudster
11 жыл бұрын
Greetings to you too Jonny...Have a good summer dude!
@d215mcgrath
10 жыл бұрын
Clean as a whistle, a job well done. I have to start mine all over again after seeing this baby.
@froudster
10 жыл бұрын
Thanks Derek...Have fun doing yours ;)
@MrWiskin
9 жыл бұрын
A very well finished streetfighter.
@007TruthSeeker
12 жыл бұрын
I'm a retired university professor in Davis, CA, with my own bone stock 1200, with which I keep up with traffic, too. It's like a magic carpet; so smooth and powerful, but I wish I had a motion damper on the forks -- it starts to demonstrate classic high-speed wobble above 100 or so. We have some great roads in the hills and mountains around here, not to mention the coast. May you enjoy many happy miles.
@Whitecichlid
3 жыл бұрын
Thank you for exposing your true identity, Roger Littge. I will use that information to drive you away from KZitem. No one deserves to hear Creationist propaganda in the 21st century.
@scottlochans4180
3 жыл бұрын
Being loopy about Bandits, pretty sure in my 30 odd years Kawasaki only, 1200 streetfighter Bandit S, sure that's a Bandit with plenty torque, very, very SPECIAL.
@brevanbarrieau2393
8 жыл бұрын
so sick. your bike looks unreal
@smerd1
3 жыл бұрын
Wow, one of the best well done 👍🏻
@froudster
3 жыл бұрын
Thank you.
@KutWrite
7 жыл бұрын
Nice touches, like the "brass knucks" footpeg guard and the transparent clutch cover.
@froudster
7 жыл бұрын
Thanks ...All my own work.
@froudster
12 жыл бұрын
Thanks Dan. The headlight unit on mine is from a Derbi Senda X-Treme SM50....Best of luck finding one. Took me ages to track one down on E-Bay.
@96t5wagon
12 жыл бұрын
gorgeous bike!
@JesseeS1990
12 жыл бұрын
Love this bike. Tastefully done. Good work
@MARVINM14
10 жыл бұрын
beautiful bandit, I own a 99 bandit 1200 streetfighter as well. great machine takes me over 170mph with only a few mod. suck as changing the cams, using high performance valve kit, stage 3 jet kit, Yoshimura exhaust, k&n filters, boosting at over 127hp.
@DBenX
7 жыл бұрын
i love that "remove before flight" patch ;) great looking machine.. i wouldn't of chosen orange and black though because it reminds me on KTM
@froudster
7 жыл бұрын
@dbenx I like KTM's too so not a problem !
@theHonkster
12 жыл бұрын
Lovely bandit that fella!
@iTzGiNz
12 жыл бұрын
That visible engine is sick!!!
@hades7195
11 жыл бұрын
until Christmas and I will show you mine sc50 s.f.Now ride, swim, sun and beers!good summer and many miles! Greetings from the land of light!
@tommckirdy1413
11 жыл бұрын
Beautiful bike. Good job!! :-)
@FearToNothing
10 жыл бұрын
hey dude, nice bike you got there! i love it!
@froudster
10 жыл бұрын
Cheers Adam.
@enddafed
12 жыл бұрын
beautiful bike!
@froudster
12 жыл бұрын
Wobble over 100 is usually down to tyre wear or pressure. Mine goes right up to 145 ish without any problems. I like the sound of your roads!! Hope you enjoy many happy mile too.
@dimonmakas3041
9 жыл бұрын
Классный тюнинг,передняя морда симпатичная,давно себе такую ищу
@froudster
9 жыл бұрын
Спасибо Димон . Маска из Дерби Scooter !! Тот же как установлены на Ghostriders турбо Hayabusa . Да, мне потребовалось много времени, чтобы найти один !!!!!
@zzrsnake
7 жыл бұрын
Impressive!!!
@eggsjackarmy9
6 жыл бұрын
fair play, looks great!!
@froudster
6 жыл бұрын
Thanks Michael.
@Kalii13
7 жыл бұрын
just picked up my bandit 600 would like to get it like this one!
@scottlochans4180
3 жыл бұрын
Got to be TORQUE Paradise, half way to the red-line, 3rd gear, WOW. Professor BTE. OUT, that's BANDIT TORQUE ENJOYMENT.
@froudster
11 жыл бұрын
They're standard Bandit hangers cut down and home made knuckle duster heel plates bolted on. Top and bottom yokes were from TES Engineering. They no longer exist, but Rich still does machining. Good luck with your build Duane.
@AxU919
12 жыл бұрын
Best Bandit on KZitem
@froudster
12 жыл бұрын
Hi Joe. I'm running a Stage1 with the rubber snorkel removed from the airbox and a K&N air filter. If you go to a Stage3 you need to run K&N dual pod filters and not 4 seperate ones as it will not run well at all. Whatever you decide to do, get it set up on a Dyno to get it running really well. Fiddling with jets etc yourself is a pain in the arse and you'll struggle to get it running to it's full potential. Have fun.
@josephbergin7017
12 жыл бұрын
thanks a mill steve for sending me the link , super build , was up half the feckin night studying the 28 pages, you were very lucky in the smack with the poor corsa, when i have my own machine finished off il email you a few picsa, iam trying to work out a neat place to refit the ignation block , any ideas, wont fit in triangle piece under tank, tried at battery box , but too bulky ,
@FUNKieMONKey55
12 жыл бұрын
That's a sweet clutch cover
@lilroc89
11 жыл бұрын
awesome bike
@froudster
12 жыл бұрын
Thank you!
@80andybrown80
Жыл бұрын
Just BEAUT !!!
@froudster
12 жыл бұрын
Thanks mate!!
@froudster
11 жыл бұрын
Hi Joe. Headlight is from a Derbi Senda SM50 Xtreme...Best of luck finding one ;) Brake res bottle was from the USA.
@007TruthSeeker
12 жыл бұрын
Sweet sound, and I know it keeps up with traffic just fine. ;o)
@froudster
12 жыл бұрын
Cheers mate.
@misstelanious2025
4 жыл бұрын
Very nice
@froudster
12 жыл бұрын
Thanks dude!
@danielmilliken7339
12 жыл бұрын
Thanks for the info. I must have spent 10 hours on web looking and havent seen anything that looks half as good Does it come with mounting kit
@zbod1
11 жыл бұрын
Awesome
@dvsamsmith
10 жыл бұрын
beautiful ;)
@froudster
11 жыл бұрын
Thanks Will. Yup I'm froudy off BF and yup it's the resurrected brown one!!
@froudster
11 жыл бұрын
Thanks Tom.
@froudster
12 жыл бұрын
Hi Joe. Thanks for the comments on my bike. To be honest I'm not sure whether the brace is from the carbed or injection model. I've compared photos of the 00-01 and 02-03 models and the swingarm brace looks the same on both??
@jirijanota7834
7 жыл бұрын
super, nice
@froudster
11 жыл бұрын
Not an easy job Duane! It took me a while to work out the wiring. Had to fit a sprocket cover and speedo sensor from a Mk2 B12 and then connect it all up. Also had to fit a Speedo Healer to calibrate the clocks as they were reading way out. I do have wiring diagrams, but if you're not that technically minded when it comes to wiring it's best left to someone that knows what they're doing or you could end up with lots of smoke and sparks lol ;)
@Gw0wvl
12 жыл бұрын
OOHHH yeah, Very nice.
@Sidrcride
12 жыл бұрын
best bandit I have ever seen...
@dazipfl
12 жыл бұрын
0:42 heftig geil! !! Hammer Ross ! ;)
@froudster
12 жыл бұрын
Thanks for the comments Joe. The smack with the Corsa was not nice at all :o( Look forward to seeing the pics of your bike when it's finished. Re the ignition switch..You're just goin to have a look arounf the bike and see if you can spot somewhere you think it will look ok and work around a fix. You'll proly have to extend the lom to get it to work though like I did..Good Luck!!
@mikopoubil6045
Жыл бұрын
Ce bandit et monstrueux
@froudster
Жыл бұрын
Merci Miko
@froudster
11 жыл бұрын
Cheers Camilo.
@froudster
9 жыл бұрын
Thanks Johnny
@MrWiskin
8 жыл бұрын
+Steve Froud The workmanship attention to detail and suspension mods make this a machine to be taken seriously. Owing a standard K3 I think its time I took out the dremel !
@shadiestyeoj
11 жыл бұрын
I love the open clutch cover! What is it made of? Also you need to get some orange plug wires :D
@littlehumor4290
7 жыл бұрын
I have a blue 600 street fighter looks so close to the 1200,AND I have the same remove before flight thing on my bandit 600! I'm eventually gonna get the 1200 or the 1250 but I love the 600 nimbleness
@billybarr7443
2 жыл бұрын
Stop telling lies lad
@littlehumor4290
2 жыл бұрын
@@billybarr7443 why is it a lie?
@duanelewis409
11 жыл бұрын
Well mate what sorta foot hangers are they building a bandit same colour and were you get your top and bottom yokes lovely bike want 1the same
@froudster
11 жыл бұрын
Thanks zbod.
@madskillzyo
12 жыл бұрын
nice bike! did you black paint or powder coat the engine?
@froudster
12 жыл бұрын
Thank you :o)
@froudster
12 жыл бұрын
Thanks for the comment mate!
@froudster
11 жыл бұрын
Thanks Johnny...I think the orange/black looks better though! :)
@JGulickx
11 жыл бұрын
haha Derbi headlights :) love the details
@froudster
12 жыл бұрын
Thanks for the comment SGB.
@volcarak43
5 жыл бұрын
A nice ONE 1💝
@froudster
12 жыл бұрын
Thanks Dave ;-)
@mik161262
3 жыл бұрын
Sweet
@Gw0wvl
12 жыл бұрын
Veeeeery Niiiice.. : )
@duanelewis409
11 жыл бұрын
Another question wat way did ye wire your clocks im not the best at that kinda stuff
@josephbergin7017
12 жыл бұрын
froudy pal , joe here from ireland, question on the swingarm , have a cnc machine pal who is going to knock me up a similar arm for my own bandit 1200 was going to run a jmc which i have but love the look of your arm , is the brace from the 00, 01 carb model or 02,03 injection set up just there are big differences in the arms . p.s. if your ever thinking of letting her go do let me know , cheers man and once again sweet machine
@froudster
11 жыл бұрын
I used my original wheels and discs...I changed the bearings on the front one to suit the larger diameter GSXR spindle and got spacers made up to get it all centered. Calipers also spaced out to suit the b12 discs which are bigger than the GSXR items ;)
@billybarr7443
2 жыл бұрын
Stop telling lies lad
@froudster
2 жыл бұрын
@@billybarr7443 So what lies am I telling then? I built it exactly as described and used the original Mk1 1200 Bandit wheels.
@froudster
12 жыл бұрын
Thanks Jessee
@Monito100100
12 жыл бұрын
very nice looking, how is the Vmax?
@froudster
11 жыл бұрын
Yup....With a little help from some good friends!
@st343n
12 жыл бұрын
Can you please tell me where you got the round chrome frame covers from I've been looking for some Every where for my 98 1200 bandit !!!!!!!
@josephbergin7017
11 жыл бұрын
steve pal joe from Ireland , got the bandit up and running after , I may upload a vid here for ya , the headlight your running , what is she , as iam getting my head blown apart by the feckin wind lol, also very neat rear break res bottle
@froudster
12 жыл бұрын
Thanks Monito. I don't have a Vmax??
@duanelewis409
11 жыл бұрын
Was thinking it would be tricky ill let someone else do it when I get to that part.. anyways thanks again steve
@josephbergin7017
12 жыл бұрын
froudy pal jo here , sound out for the advice on the arm hope my mate does a tasty job on her. question for ya are you running a stage 1 or 3 dynojet kit as i notice you have done a few mods on the air box set up , can ya fill me in man as i know with the stage 3 set up cone filters are the way but in the lovely irish weather where you get 5 mins of sunshine if the filters get wet the 1200 engine runs like a bag of s.it. once again class machine froudy
@tomhasballs90
10 жыл бұрын
Lovely! whats the headlight?
@froudster
10 жыл бұрын
Headlight from a Derbi Senda SM Xtreme ...Same as on Ghostriders turbo Busa.
@hades7195
11 жыл бұрын
brown is awesome man
@danielmilliken7339
12 жыл бұрын
Baddest bike I have ever seen. Wanting to remove the fairing from my 600s. Can you tell me what company sells the one on your bike.Love the look
@johnlimb953
6 жыл бұрын
hi what rear end is on it and is it easy to fit.....👍
@andrewsmith-zi7db
6 жыл бұрын
Hi thanks for the information when you have a wiring diagram can you let me no the bike is so nice you do get work bud
@froudster
12 жыл бұрын
I got them made my TES Engineering. The company no longer exists, but I have a contact that can still get them made.
@duanelewis409
11 жыл бұрын
Ill try again in awhile must get a look was on ebay buying wheels was looking at k4 gsxr but got srad 750 wheels need discs and a lot more yet not easy
@josephbergin7017
12 жыл бұрын
sound for all the advice froudy pal, iam waiting on my swingarm to come back to me i hope looking along the lines of your own . if not i might just ask ya to get your buddy to knock one up for me or ya could always just sell me that sweet machiine lol (kinda half serious) have my 1100 front end in and billet top and bottom yokes also going to run the 02 up digital pick up and front sprocket cover and wire it in. is there much frame mods to work the 03 r1 tail unit and wiring into place cheers
@aaronpowell6859
11 жыл бұрын
I agree change the head light then it would be perfect! Still very nice thumbs up :)
@salg500
4 жыл бұрын
Hey! Wanna know your mod list for that tail swap please
@froudster
12 жыл бұрын
Thank you...and yes it does keep up with the traffic ;o) So who are you then???
Пікірлер: 197