Переделал глушители подобным образом. Результатом доволен 👍
@user-cq4mp4mj6f
4 жыл бұрын
У gsx есть особенная харизма
@alanjohnstone2539
Жыл бұрын
Hi just done mod, 44mm hole does not give enough wiggle room went for 54mm. To drag out pipe with welds on underside had to weld on puller to drag it out. Lathe invaluable to make new stubs and adaptor then bore out end plate. Definitely not a quick job. Looking forward to doing sound check😀 I am same as you like the look just a smidge too quiet. Cheers Alan
@jacogladek
Жыл бұрын
Well done 👏 Alan
@earthtrekker1
3 жыл бұрын
Great job, sounds class
@grahamebrushett6642
3 жыл бұрын
Doesn't sound much different to be truthful = Just get some Scorpion race cans take the baffles out and really enjoy a proper sound enjoy.
@polak212
3 жыл бұрын
Nice - was thinking about doing sometehing like that and found your vid that convinced me :)
@alanjohnstone2539
Жыл бұрын
Did you get fuel ratio checked to make sure it’s not running too lean? Good job.
@jacogladek
Жыл бұрын
Hi, I did not check. Regards
@yohvh
6 жыл бұрын
all this work but its less loud then those aftermarked pipes you mentioned
@mooncat.787
3 ай бұрын
A job well done but not loud enough for me personally. Delkevic 200mm Stubbys..... Loud. 😱😱😱
@sanoj1969
6 жыл бұрын
I am also a owner of this great motorcycle. Great work and great muscular sound. Thumbs up and have a great season 2018.
@Jamboliner
4 жыл бұрын
Awesome. Does it affect performance in any way? Thanks for sharing
@jacogladek
4 жыл бұрын
Hi I can't feel any.
@3awod132
Жыл бұрын
I`ve done this job to my GSX1400 K2 and it works and sounds well! Thank you for that detailing manual. Check out the sound @: kzitem.info/news/bejne/ppywuGuPjXWChmU
@jacogladek
Жыл бұрын
Sounds great. Exactly same like mine. Good job. 👍
@3awod132
Жыл бұрын
@@jacogladek Thank you mate! Always a safe ride!
@1234frytki
2 жыл бұрын
A jaka gruba byla ścianka rurki i tej perforowanej? Chciałem zamówić....
@nickyhockley5562
6 жыл бұрын
hello, thanks for this video, am going too do it as well, cheaper and quieter than after market, hoping for just a bit more sound...will let you know how mine turns out....did you re-tune ...cheers.
@jacogladek
6 жыл бұрын
Nicky Hockley Hi I did not re-tune engine. Cheers
@01sandis
5 жыл бұрын
@@jacogladek in that case - did you feel any power loss or fuel economy loss?
@jacogladek
5 жыл бұрын
@@01sandis No. Can't feel any power loss
@01sandis
5 жыл бұрын
@@jacogladek and what about fuel economy? Does your beast eats more after this modification?
@01sandis
5 жыл бұрын
Also it is hard to understand the loudness of the exhaust - have You ever tested the actual dB on it?
@jacogladek
5 жыл бұрын
No mate. I did not
@polak212
3 жыл бұрын
BTW how long did it take you to wiggle can out?
@jacogladek
2 жыл бұрын
About 30min
@alfredgeist87
4 жыл бұрын
anstatt Lärm zu erzeugen solltest mal Kurven fahren lernen - wäre eine bessere Investition, - dann kannst auch ohne nervenden Lärm Spaß haben
@jacogladek
3 жыл бұрын
I can turn with no problem. And it is not annoying noise. Just a bit louder (lower sound)
Пікірлер: 29