Correction 1:
I recommend you use a different gasket maker than I am using on the crank case halves. Alternatives can be permatex motoseal and yamabond 4 or other higher quality gasket makers.
Correction 2:
In the manual it says to replace the o-rings and use grease for the oil tubes (11:05). I and many other people experience leaks from this location after doing this. I recommend using plenty of gasket maker at this location all around the o-rings.
Correction 3:
At 10:50 I mention the tool used to install the piston rings recommended in the Haynes manual. I have since used it and do not recommend it. It’s much easier to do it by hand with very small screwdrivers.
Негізгі бет Автокөліктер мен көлік құралдары Suzuki Katana Engine Reassembly 1990 GSX750F
Пікірлер: 253