Torque specs for this: Axle - 47 ft-lb Axle Pinch bolts - 16.5 ft-lb Caliper Bolts - 28 ft-lb Good video! I have an SV-1000 and love it!
@dan0368
5 жыл бұрын
You're the real MVP! Ty
@ashtonhutchinson8911
4 жыл бұрын
Any idea of disc replacement torque settings
@MannYgfx
7 жыл бұрын
Really like videos that go straight to the point without any bullshit, just like this one. Thanks!
@planetpeckham1
5 жыл бұрын
Brilliant! I now understand why you can't but front axle sliders for the SV650, they have solid (non-hollow) axles. Thanks for posting.
@halaboly8915
4 жыл бұрын
Concise and straight to the point. Amazing video!!
@zachlarson8442
7 жыл бұрын
Great video ! Hard to find a video that doesn't have a bunch of uneccsary talking.
@bobbystonekutter2824
6 жыл бұрын
Thanks for that video.. do u think I need to release axle for an alignment fork? U answer will be appreciated bc I don't have the proper wrench. Anyway.. thank U it really helpful to have guy like u on KZitem..
@leahsalazar-b2e
5 күн бұрын
tnx
@markus64s
8 жыл бұрын
Just what I needed. Thanks!
@mrmischievous
Жыл бұрын
Thanks for the video! Tire shop gives me a huge break on tire install price if I bring in the wheels separately. Question for you: I don’t have a front wheel stand; would you recommend putting axle stands under my frame sliders?
@RideWNC
Жыл бұрын
I would go on Craigslist or FB Marketplace and find stands. Usually they are cheap.
@zzxx33mh
8 жыл бұрын
v.good vid ..simple..thnx man..
@beastbomber2511
Ай бұрын
I did this exact thing but now my front wheel Is super tight any ideas?
@RideWNC
Ай бұрын
Speedometer is not lined up correctly.
@Saterata13
6 жыл бұрын
Very useful. Thank you 🙌
@madisonspanfelner4705
3 жыл бұрын
Hey, does the SV have a spacer on the right side? (If sitting on the bike, left side if facing it)
@svrsxlt
3 жыл бұрын
Mine Burst to pieces. Can't find it anywhere online. It looks like a top hat, made of rubber, and I'm trying to replace it right now
@jonathanturner791
7 жыл бұрын
Great Video! What type of grease did you use on the axle? and where did you buy it at?
@RideWNC
7 жыл бұрын
I use marine grease. Any boat store will have it. Any grease will be fine.
@svrsxlt
3 жыл бұрын
So the left side has the speedo between the wheel and fork. I need to know the name of the part on the other side between the wheel and the fork. It's some kind of spacer or bushing, and I can't seem to find it anywhere
@RideWNC
3 жыл бұрын
Spacer. I am guessing you need: 54740-32C00 1999-2002 www.ebay.com/itm/133791762793 www.ebay.com/itm/202449045971
@RideWNC
3 жыл бұрын
If it is a newer bike, the spacer is part of the axle.
@svrsxlt
3 жыл бұрын
@@RideWNC it's a 2003
@RideWNC
3 жыл бұрын
@@svrsxlt Look at your axle. The right side goes into the seal.
@svrsxlt
3 жыл бұрын
@@RideWNC thats what I saw. The part looks like a tophat, but is made of silicon at the bottom, unlike the 1st gens. If it's Public, check out north AL motorcycle, and sv650 Facebook group, I posted pics in both
@motorcyclerefurbishment8162
7 жыл бұрын
An Allen socket is a much better plan.....
@bskifton
7 жыл бұрын
Usually pricier too! But yeah, helps you with a torque wrench as well.
@svrsxlt
3 жыл бұрын
Yeah I just went to harbor freight and picked up a pack of Allen sockets for ten bucks, and then you can torque the axle to 47lbs like you should.
@roymichaeldeanable
3 жыл бұрын
@@svrsxlt ...Allen wrench...throw them away...cause problems
@Sam590ss
3 ай бұрын
And antiseize is a better choice than grease. Grease will dry out.
@adamkeselj4962
3 жыл бұрын
How tight do I do the bolts? Great vedio do I use a torque wrench for the bolts or no need? 😁🏍️
@RideWNC
3 жыл бұрын
None on the front wheel bolts are extremely tight. You should use a torque wrench to make sure the bolt don't get over tightened.
Пікірлер: 34