Rebuilding the 1974 Suzuki TC125 crankshaft using the hydraulic press to separate the two crankshaft half's. Replacing worn rod, bearing, crank pin, and thrust washers. Then pressing the crank half's back togeather. Then by using the metal lathe to hold the crankshaft it is then trued to within .002 of an inch. Then the oil slinger is installed. Crankshaft is now ready to reinstall in the engine cases.
- Күн бұрын
Suzuki TC125 motorcycle crankshaft rebuild
- Рет қаралды 21,193
Пікірлер: 56