Thanks for the positive mention! Those Chinese ignition switches are the worst. OEM is the way to go! 😎
@spycho357
2 жыл бұрын
This helped me fix my no spark condition, much appreciated.
@sandrofrazzo9886
6 ай бұрын
A huge thanks, i was going crazy since the issue (no spark on both plugs at engine start) was intermittent and random, a lot of wd40 into the ignition switch fixed the problem, 100 ohm constantly now :)
@Mad8vCycles
6 ай бұрын
You can also take the barrel apart and clean it well. Or use graphite lube.
@sandrofrazzo9886
6 ай бұрын
@@Mad8vCycles I did it, removed the two screws on the top, barrel and spring then cleaned with wd40, the bottom can't be open without drilling it i guess
@Mad8vCycles
6 ай бұрын
@@sandrofrazzo9886 just 2 security torx bolts with loctite. kzitem.info/news/bejne/2ZyvuH2QbYlypYI
@sandrofrazzo9886
6 ай бұрын
@@Mad8vCycles yes, i removed the Key switch from the top triple clamp unscrewing those screws...i mean the two screws at the bottom of the switch to acces the electric contacts can't be removed
@sv650nyc7
3 жыл бұрын
I have an unused Chinese lock set lying around. Will check it out. Glad I never installed it.
@Mad8vCycles
3 жыл бұрын
most work though.
@danisyx5804
3 жыл бұрын
a $1 resistor is always an acceptable fix just make sure it's rated for the right wattage
@Mad8vCycles
3 жыл бұрын
or just keyless the bike and run the whole thing off the right pod
@danisyx5804
3 жыл бұрын
@@Mad8vCycles i know where to get the key eliminator or i think i have the right resistor (used 100 ohms for the tail/brake light, 5 watt, BIG) but that gives me the tail light problem. might have to spend a couple more days twisted on caffeine screaming at the bike to solve that. remember my controls arent even for a suzuki and didn't even have the same wire count. i honestly dont know what they are for they just had the right functions but not always on the suzuki side. keyless was the plan until the tail light thing and the 100ohms thing. if you know what i need to do message me on facebook because i need to make some minor repairs to help me sell this bitch and start packing up (got an offer on the house moving again)
@user-tr7uw5zb6c
3 жыл бұрын
Lol Saved me a CDI ;)
@boercker09
2 жыл бұрын
Would this cause no spark in both cylinders but the bike to turn over? Bought a crashed bike and I have power at the coil and the bike turns over but no spark
@Mad8vCycles
2 жыл бұрын
it could. or no spark could be the pickup coil off the flywheel. or the cdi box
@OmarBrown-gk2wx
Жыл бұрын
What wires are they on 2001 gsxr 600 , having the same problem ?
@Mad8vCycles
Жыл бұрын
Unfortunately ive never owned one so not sure
@OmarBrown-gk2wx
Жыл бұрын
@@Mad8vCycles ok thanks .fr Jamaica l don't have a manaul
@Mad8vCycles
Жыл бұрын
@@OmarBrown-gk2wx there are service manuals online www.manualslib.com/manual/896122/Suzuki-Gsx-R600.html
@kevinnebens3072
Жыл бұрын
It very possible my sv650 is having this issue , it’s mKing it to where I have no spark waiting on a new ignition now , where does the resistor go ? Color wires ?
@Mad8vCycles
Жыл бұрын
on either of the wires in the video. if you have a chinese aftermarket ignition, a lot of times their pins are in the wrong places. so something else to check
@darrenicon5172
Жыл бұрын
If harness without 100ohms is used can it damage bike? Put in China ign switch now have no spark at plugs put back genuine ign switch and harness still no spark. Any help appreciated. 🤷♂️
@Mad8vCycles
Жыл бұрын
id be surprised honestly. anything that would be bad would have a fuse protecting it
@darrenicon5172
Жыл бұрын
Have joined SVrider and posted SV650 no spark by doc1967 hope you can help.
@Mad8vCycles
Жыл бұрын
I saw (im a mod there)
@bobsuruncle679
5 ай бұрын
To get c42, the stock ignition is bad on sv1000?
@Mad8vCycles
5 ай бұрын
most likely yes. check the resistance on it? could also be green connector of death.
@Dannyyzeee
Жыл бұрын
Does c42 also cause no fuel? I have no spark and my fuel pump is not priming nor is the relay clicking on
@Mad8vCycles
Жыл бұрын
it's been a minute but i dont think so? no pump would be red switch, kickstand switch, tipover, etc?
@Dannyyzeee
Жыл бұрын
@@Mad8vCycles red switch is confirmed good and wouldnt the kickstand switch and tipover sensor cause no crank? because i have crank just no spark or fuel
@Mad8vCycles
Жыл бұрын
@@Dannyyzeee what have you tried replacing or bypassing so far?
@Dannyyzeee
Жыл бұрын
@@Mad8vCycles my first suspicion was my ignition barrel, so i tested the 100 ohm method and got no read, so i have that on order. I am also suspicious of the fuel pump relay as it doesnt click, but im having trouble finding a new replacement.
@Mad8vCycles
Жыл бұрын
@@Dannyyzeee new oem: www.partzilla.com/product/suzuki/38740-24X50?ref=b4cc24f96e2334f4c34fa670ed34dc302e537a4a feebay: www.ebay.com/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313&_nkw=38740-24X50&_sacat=0 i probably have a couple on harnesses if you need also
@teemuronkainen
2 жыл бұрын
can you fix the resistance?
@Mad8vCycles
2 жыл бұрын
i guess you could crack the ignition open and replace the internal resistor somehow. or put a resistor inline on either wire
@Mad8vCycles
2 жыл бұрын
when i say either wire, i mean im not sure which one
Пікірлер: 40