Your reviews are so convincing Nathan, I had said in an earlier comment I was considering a Kayfun Lite Plus but after this smashing review I have just purchased a Kayfun X from a retail outlet here in Aus. I look forward to vaping it along with all the other MTL RTA tanks you have convinced me to buy.
@netvaper
Жыл бұрын
Excellent choice that will hopefully deliver you vaping joy for many years. I would love your feedback😊
@andreivrublevschi5524
2 жыл бұрын
Yes, another very good and useful video. Thank you so much for this. Especially that comparison with Prime an Lite. I have a Lite and was very good to know that in terms of flavor is quaite similar. Because primarily what I look for is always flavour.
@netvaper
2 жыл бұрын
Thanks Andrei. I specifically mentioned the Lite & Prime so those who have either, do not need to upgrade just for flavour
@eddytytan
2 жыл бұрын
Love the review!!! Keep up the good work! Got very excited to see there is a new kayfun tank out there! Really want one now! Thanks for the review!
@netvaper
2 жыл бұрын
Thanks Eduard. Indeed it is worth getting excited about😊
@mohammedalensawi9423
2 жыл бұрын
Thx Nathan im happy because ur the first English review for this tank, and it seems an excellent one from svoemesto and worth to try
@netvaper
2 жыл бұрын
Defiantly is Mohammed I vape it constantly. Svoemesto have done it again, It is an awesome MTL. In the era of disposables & pod kits, such an RTA is breath of fresh air & flavour😊
@Hafensaenger
Жыл бұрын
Another high quality review! Thank you so much for your videos, I really appreciate your work. I am a little late on this, but I am pretty sure, that, regarding to the liquid control, it is: pulling -> LC closed, pushing -> LC open, turning -> only to center the "X" to your mod.
@netvaper
Жыл бұрын
@Hafansaenger0815. Never too late for informative comments😊 especially so when you are correct 👍
@CraigBolt
Жыл бұрын
Thanks for the excellent review on the Kayfun X, and its comparisons to other Kayfuns. I have the Kayfun Prime and ive not used it much as I nearly seized that RTA,as you mentioned it the comparison part of the video. Thank you Nathan. 🙏🙏👌👍
@netvaper
Жыл бұрын
Thanks Craig. Enjoy your Prime. It is high quality RTA but fragile especially the airflow system. Any knock can damage the lift & turn delicate mechanism
@danielmanor9342
2 жыл бұрын
Thanks Nathan for your usual in depth review of new Kayfun X i am so happy that you mentioned that the Prime is as good, as you know i bought the Prime with your help and it is my all day go to vape with juice cabin NET's best combo that keep me off the smoking. Maybe one day i will treat myself to the X as well. All the best. Daniel
@netvaper
2 жыл бұрын
Thanks Daniel enjoy your Prime it is a superior MTL and you are not missing out at all in quality of build, flavour & drew. Just do not drop it on a hard surface as that can damage the delicate airflow lift ring.
@JamesMtl
2 жыл бұрын
I'm very impressed with my kayfun x I have la Tabaccheria Mata Fina in the tank at the moment it is superb. Thanks for the review Nathan.
@netvaper
2 жыл бұрын
Thanks James. Enjoy your LT Mata fina, i need to try it myself i have heard it is a superb Cigar NET
@miladonplay9795
8 ай бұрын
For two months I couldn’t properly install the cotton wool in kayfun x, the cotton wool was constantly either burning or being over-saturated, today I did exactly the same as you in the video and everything is perfect! Thank you so much!❤️🔥🤝
@netvaper
8 ай бұрын
I am glad it worked out for you. Enjoy it😊
@miladonplay9795
8 ай бұрын
@@netvaper Thank you sir 🤝
@intheblim
2 жыл бұрын
Great review as always been waiting for this :)
@netvaper
2 жыл бұрын
Thanks Daren happy it is helpful 😊
@vladtorrez3493
2 жыл бұрын
Thanks for the review Nathan, really interesting device!!!
@netvaper
2 жыл бұрын
My pleasure Vlad
@unknowndeath829
Жыл бұрын
also loving the videos i watch your stuff all the time for advice
@netvaper
Жыл бұрын
Thanks 🙏
@taysinturhatapaus1853
2 жыл бұрын
Waited for midnight to order it when it was released :D have to wait 2 more days until it arrives. Have owned every kayfun that has been released since prime and cant wait for this beauty ❤️ glad to see your review so early 😊
@netvaper
2 жыл бұрын
Oh I see you’re one of the Kayfun hard-core fans😀 Enjoy it when it arrives Taysin. Happy my review was helpful
@taysinturhatapaus1853
2 жыл бұрын
@@netvaper thanks 😊 kayfuns really shine as mtl tanks, dl on the other hand not so much 😆 awesome that you showed size comparison to other kayfuns, not many reviewer does that anymore 🙄 I think they made the juice flow/filling spin because if ppl use side by side mods, you can adjust it away from your mod and you dont have to screw the tank from the mod 🤔 I dont think when you spin the tank the juice flow holes get bigger or smaller but cant be sure 🤔
@netvaper
2 жыл бұрын
@@taysinturhatapaus1853 yes your are right the turning of the logo ring is for a side by side mod not to control the juice flow like the Prime. Anyway the juice flow system works perfectly without any need to control. Enjoy it.
@papasalioutall6409
2 жыл бұрын
good review as always, thanks for that. Looks like a great tank, but stoped using my KFL+ since I had a BY-Ka SE, you would probably love that one too ;)
@netvaper
2 жыл бұрын
@Papa Saliou Tall. Thanks. Indeed i heard quite a lot on BY-Ka especially the V.7 VINTAGE EDITION, tempting if you can find one in stock
@papasalioutall6409
2 жыл бұрын
@@netvaper Yea quite difficult to find those in stock indeed!
@Godard92
Жыл бұрын
I've the Prime, Lite 2021 and the 5s but couldn't resist getting the X. It arrived today...paired it with my Hadron Lite and as you say Nathan it oozes build quality - weighty and a stunning looker as well. I built a 26g kanthal round wire (slightly spaced) coil coming out at 0.87 and filled the tank with Mata Fina. Once the coil & cotton bedded in...it produced awesome flavour at 15 -16 watts. The new features are very well designed. I will use this solely for NETs - its a keeper for sure.
@netvaper
Жыл бұрын
Thank you Mark for your feedback i am super happy you enjoy it the way i do, as you say its a keeper😊 As for the Mata Fina a review would be uploaded in the coming days, probably while away on my summer holiday, cannot wait!!
@Godard92
Жыл бұрын
@@netvaper I look forward to the Mata review. Enjoy your hols 🙂 Incidentally Nathan, I have upgraded my Prime with the Svoemesto Nozzle kit and the multi-hole option has improved the flavour intensity considerably (not that it was bad with the stock). I gather these were designed for NETs. CdeV stock them, well worth checking out.
@netvaper
Жыл бұрын
@@Godard92 hopefully it will be uploaded towards the end of week. As I am not sure the internet connection where we will be on holiday next week. Will certainly check out the nuzzle kit sounds interesting. Thanks for the info
@Obiwanshinobi2
2 жыл бұрын
Nice review 😊 the kayfun x looks really good ! Iv also had my eye on a new boro tank you might like as it’s like the bishop , it’s called the vision by umbrella mods . Bishop style desk and innovative airflow for a boro tank I think you’ll enjoy it
@netvaper
2 жыл бұрын
Thanks Fran. I think i am over my Boro tank experiments😊 but one never knows
@dtmyers
Жыл бұрын
After watching your review I bought the Kayfun X and what a great design and build it is, my only complaint would be with the flavor as I can't really tell the difference between the flavor of the kayfun and my berserka. Also thanks for the wicking and setup tutorial it really helps a newbie like myself. Keep up the great work.
@netvaper
Жыл бұрын
@Daniel Myers. I bet you vape non NET liquids like fruit & alike. As the flavours of any non tobacco are stronger so to your palate it seems you taste the same depth of fruity flavours on both RTAs. But when you vape NET’s that the flavours are naturally extracted are much more delicate and there lies the difference between both RTA’s. The Kayfun brings out the various nuance & the tobacco leaf earthy & nutty including the natural sugars in the leaf or spices pending on the blend better then berserker.
@dtmyers
Жыл бұрын
@@netvaper Correct and thanks for your reply. Apologies I actually missed the whole NET part of all your reviews, I still have a lot to learn in my vaping journey. Thanks again.
@VictimOfFat3
Жыл бұрын
Mine just arrived today. Got it all set up and loaded it up with the colonel by juice cabin and it blew my mind how phenomenal is. My previous tank (suicide mods ether rta) was giving me these horrible throat hits which I assumed was normal. Once I switched to the kayfun x, I immediately noticed how smooth and tasty the vape was. It's really made my week.
@netvaper
Жыл бұрын
Thanks Erdem for your update and I am very happy you enjoy it so much as I do, it really is one of the best.
@Diplako
2 жыл бұрын
ur excitement alone would make anyone fall in love with it , luved the review , thx a bunch Mr. Nathan , Ps : i believe the juice flew is only on and off , and what it said about the logo its most probably that u can turn it so when u have the kayfun x on a sbs mod its easy to slide the top cap , some slide top caps on a sbs mods wont open coz the direction of the slide hits the battery tube ( thats actually my personal opinion )
@netvaper
2 жыл бұрын
@ZizoZack Gaming. Thanks, you are right i am very excited with it😀 As for the juice flow yes you are probably right i think so too.
@fordi_steve
2 жыл бұрын
Great video. I have to say this is the first Kayfun I have a flooding issue with even though it’s wicked like my others. Had to turn it upside down so the juice won’t flood and then blow down the drip tip so the flooded juice comes through the airflow.
@netvaper
2 жыл бұрын
@Fordi. I never yet experience a flooding and I use it daily, in fact I am vaping it now while replying to you. Some tips. It needs a bit more wick as the juice flow is very effective & cut to right length as show in the close-up. Also do not over moisten the fresh cotton when first inserted just a light moistening. You might get a gurgling for the first few draws if over moistened. Always lift the tank to shot the juice flow when adding liquid. I can’t think on any other causes for your flooding.
@fordi_steve
2 жыл бұрын
@@netvaper thank you, appreciate your help!! Will try again tomorrow after work.
@JaredGunstonTV
Жыл бұрын
I desire a kayfun one day when I can afford it and find a way to get it to me. Subbed to your channel, as an MTL lover I find your videos are slow and well paced to learn from. Got my Pioneer 1.5 a few weeks ago and am loving it, I'd like to get another and one day a kayfun. All the best and thanks for the content.
@netvaper
Жыл бұрын
@JaredGunstonTV. Thank you & welcome to the channel
@djzhor457
2 жыл бұрын
I'm gonna get one this week haha. Good review, I heard everything I was wondering about.
@netvaper
2 жыл бұрын
@DJZHOR. Thanks i would appreciate your feedback when / if you do get it
@djzhor457
Жыл бұрын
@@netvaper so after using it for 3 weeks I can say that I do like it. It’s my first mtl rta and I’ve been using it with black note Virginia which hasn’t been great. The coils gunk up super fast sometimes. I have to clean them without having gone through my the whole tank. I’ve been building 26 gauge ni80 9 wraps 2,5 io. Which is about 1 ohm. Oh I haven’t been able to get the right amount of nicotine, the girls at my vape shop didn’t calculate right. So I need to vape a lot to get satisfied. Hopefully when I gets stronger juice It’ll work out much better for me. Id like to hear your thoughts on the build, is it ok? Is it too many wraps? I do want to get the la tabaccheria Virginia soon. I heard their juices don’t gunk up the coils as fast as blacknote’s do.
@djzhor457
Жыл бұрын
@@netvaper a few things I don’t really like about the design is that the mouthpiece is a bit loose. But it works totally fine.
@netvaper
Жыл бұрын
@@djzhor457 Thanks for the feedback. your build seems fine although i wrap 6-7 wraps on 26g Kanthal round wire. Ni80 coils i buy pre-made. If you can buy 72mg nicotine it is ideal for you as you can add according to a 72mg chart to get your nicotine preference spot-on, so you don't chain vape and that is why your coils are gunking up so fast. All NET's gunk up coils i change my cotton & clean my coils every 2 days
@netvaper
Жыл бұрын
@@djzhor457 it is odd as i have heard a few complains about a loos drip-tip as mine is quite snug
@heidibal255
2 жыл бұрын
Thank you Nathan, good review 👍
@netvaper
2 жыл бұрын
Thanks Heidi😊
@lynsmith1096
2 жыл бұрын
Another good review Nathan.
@netvaper
2 жыл бұрын
Thank you Lyn
@perikovich6745
Жыл бұрын
Hi Nathan, I follow you since several months ago. I bought 1 Pioneer and 2 Bishop. After vaping with them, I concluded that Bishop is a very interesting option (more than the Pioneer ). But I wanted to know from my own experience which are the differences ( if they exist) between a decent atomizer - Bishop - and a “ high end” atomizer. Then, I have just bought the Kayfun X. After vaping four days with it, I must say that Kayfun X is another thing, that is, there is a big big difference with the others atomizers I mentioned before. Kayfun X, for me, is a perfect machine of engineering. The price paid for it, in my case, has deserved it. Thanks for your reviews.
@netvaper
Жыл бұрын
Thanks Peri for your feedback. Yes the X is on another league. As an all round excellence, it is hard to mach in all categories. Enjoy
@Silverbolt1981
2 жыл бұрын
Thanks to you I found out that a new kayfun is out.I immediately ordered it to join my Kayfun rta family.
@netvaper
2 жыл бұрын
Enjoy your new Kayfun X Andres. Would appreciate your feedback😊
@Silverbolt1981
2 жыл бұрын
@@netvaper Thank you.So the X arrived just a couple of hours ago.I rinsed it with water thoroughly,left it to dry and did my first build exactly as I prepare my prime and lite,with kanthal 28ga,2.5 mm and 1.0 ohm.. The taste is there,it is a Kayfun after all but it is gurgling more than I expected. I like the ease of use,the top fill mechanism is well machined,also the chimney is well made and smooth too. But the gurgling is a bit annoying so far.
@Silverbolt1981
2 жыл бұрын
So I just made a second attempt putting this time a thicker piece of cotton and that reduced the gurgling but did not eliminate it. Heads up I found the trick,I had to place the coil super close to the air hole,like 1-1.5 mm above it. No more gurgling!!!!
@netvaper
2 жыл бұрын
@@Silverbolt1981 perfect I was about to advise on your 1st feedback to add more cotton. As for lowering the coil it should be just above the airflow pin but without actually touching it so 1-1.5mm sounds about right. I am happy you can now fully enjoy your X. As for flavour I found it to be superb as the Prime & Lite but perhaps a bit sharper with my tobacco liquids maybe it is that narrow mouthpiece that gives me that impression not sure. What is your impression
@Silverbolt1981
2 жыл бұрын
@@netvaper I believe that narrow and long mouthpiece is the best they made so far in the series,I do like it a lot.. I only tried one tobacco liquid so far,one that I vape a lot with the prime and lite but I didn't notice any sharpness on the taste. Tomorrow I will try another tobacco liquid which I know well how it tastes and I will share my experience with it.
@-djs
2 жыл бұрын
Hi Nathan, great review as always, just a quick note in case you don't know, the bloke who owns/runs LaTabaccheria is on Marks show tonight (Tuesday) @ 2030.
@netvaper
2 жыл бұрын
Thanks djs for letting me know. I hope I will manage to watch within the 2nd half of the show.
@johnbullough6431
2 жыл бұрын
Great review Nathan. Just waiting for cdv to get some more in soon they sold out so fast 😥🙌
@netvaper
2 жыл бұрын
Thanks John. Knowing CDV they would re-stock very fast
@steammachine5929
2 жыл бұрын
Ohh Very nice looking mtl rta. I have the Kayfun 5 , and i think i Need the X too. Vape on my Friend
@netvaper
2 жыл бұрын
@Steam Machine. Thanks. The X is worthy upgrade form the 5
@g.m.4119
2 жыл бұрын
Hi Nathan. Top review as always. The x stands for the number 10. And the turning don't adjust anything. It's just to adjust the x. If you have a sbs and can't open the topfill, you turn it, as you like. Best regards
@netvaper
2 жыл бұрын
Thanks for the info G. M. I think so as well.
@35o125
Жыл бұрын
I've found this that could be an explanation for the question you pointed out about the twisting of the atomizer: 'If you want to align it perfectly with the mod, you only have to pull up the Atomizer until you feel a click, then turn it to the desired position and lock it again.' Hope that helps.
@netvaper
Жыл бұрын
@35o125 yes I figured that out since😊
@deepblue7090
Жыл бұрын
it is just optic, if u like the x logos to be visible to others while vaping so they give u the option to do so, it has no other function in fact
@netvaper
Жыл бұрын
@@deepblue7090 indeed thanks
@chuckgrumble5440
Жыл бұрын
thanks for the review net!
@netvaper
Жыл бұрын
Pleasure Chuck😊
@panemoy
Жыл бұрын
Kayfun X with Dvarw driptip is banger ! Dvarw is, all in one, banger for Kayfun X 👍 using both for a two weeks, in parallel, and for me - that's it
@netvaper
Жыл бұрын
@panemoy that’s it is right😊 you have 2 of the best. Enjoy
@lhuchison
Жыл бұрын
excellent review. Thank you
@netvaper
Жыл бұрын
Thanks Leon
@AN-if5tk
Жыл бұрын
Brilliant review
@netvaper
Жыл бұрын
Thanks 🙏
@MrElmo01us
Жыл бұрын
I’m still using the kayfun lite as my primary tank will look a getting this one soon as I like the top fill and flow on off features
@netvaper
Жыл бұрын
@Shannon Grant. The Kayfun lite is amazing MTL but I suspect the X will make that satisfaction smile just a bit wider😊
@kafetzis31
2 жыл бұрын
Excellent detailed and honest review as always!!!Very interesting mechanism and superb design as expected by Svoemesto but imho it's overpriced just like the Kayfun V4!!!Thank you dear friend!!
@netvaper
2 жыл бұрын
Thanks John. To be fair when you actually hold it in your hand you realise the supreme quality of material and engineering, you can understand better why it is expensive
@kafetzis31
2 жыл бұрын
@@netvaper I totally concur my friend but if it was at a price range of a 100 euros instead of 150 euros it would be accessible to more vapers out there who can't afford that dear price.
@netvaper
2 жыл бұрын
@@kafetzis31 I fully agree with you on the point of high ends being accessible for more vapers, that is why on occasion I review clones so all can enjoy top quality within a reasonable price. To be honest high end manufacturers would be wise to reduce their prices so clones would not be the 1st option for so many.
@kafetzis31
2 жыл бұрын
@@netvaper Profit is what everybody is after I'm afraid...Manufactures and modders have become millionaires because of us who have turned vaping into a hobby...For many vapers though clones is the only way and of course China has gained millions as well because of that as well.On the other hand we benefit too when we want to try out sth new which is far less dear than the original(which in some cases the original is impossible to be obtained via groups on fb or private clubs)
@netvaper
2 жыл бұрын
@@kafetzis31 well said John
@antonio_vapetraffic978
2 жыл бұрын
Gorgeous RTA
@netvaper
2 жыл бұрын
Indeed it is Antonio
@ohmslawyer3599
2 жыл бұрын
As I understand the mechanism, lifting and turning the tank in either direction does not adjust the juiceflow in any way … it is just a feature to align the logo with the mod or adjusting the opening mechanism if needed for usage with sidebyside mods … nice review - I will stick with my kayfun-2019-lite(s) :-)) Cheers !!!
@netvaper
2 жыл бұрын
Yes Ohms Lawyer i think so as well. Enjoy your lite 2019 as it delivers a very similar quality, flavour-wise.
@gortech3898
2 жыл бұрын
Hi Nathan. Another great review. Thx I don't think there is an adjustment to the amount of juice flow. It's either open or closed. When they say to lift, and align the X with the mod, I believe that is so we can align the direction we want the top cap too move when we open it. When the juice flow is closed the tank can freely spin thus allowing alignment. Purely speculation as I'm still waiting on mine to arrive from Creme de Vape.
@netvaper
2 жыл бұрын
Yes Gortech your are right the alignment is for a side by side mod but the juice flow is fixed when in lowered position and works flawlessly. Enjoy it when you finally get it.
@huxxam
2 жыл бұрын
Well that was a real honest review. I have the prime, 2021 lite and the dvarw,spica and don't have any reason to get the x. It is nice to have but not must have.
@netvaper
2 жыл бұрын
I fully agree with you Hussam😊 enjoy you top quality RTA’s
@mikemar988
2 жыл бұрын
Hi Nate! Great review as always! Since you appreciate your fevs and kayfuns so much, i believe you should try the kuma by enequadro mods. I reckon you will put everything aside 😃 Take care
@netvaper
2 жыл бұрын
Well Mike if you feel so confident about the Kuma Vs Kayfun I ought to try it😊
@colinross8525
2 жыл бұрын
@@netvaper Second the kuma really is amazing.The taste i feel is the best ive had from a RTA
@mikemar988
2 жыл бұрын
@@netvaper It has all the perks of the fev and the kfl, a compact size, plus two more chimneys to suit any liquid you throw in to it. I m sure you ll love it
@pisourias
2 жыл бұрын
@@mikemar988 on your experience, which chimney suits in what liquid? I saw a review that said: vaulted chimney Is for fruity liquids, rounded chmn is for tobbaco liquids and with steps.. I don't remember. Maybe for more analysis
@mikemar988
2 жыл бұрын
@@pisourias i only do tobaccos and my preference for those is the flat chinney. It gives me more throat hit and a nice blending of the aromas. The rounded one i d say is more sharp and it separates the individual flavours. The stepped one doesnt seem to be different than the flat one a lot for me at least. It is easy to change the bell without loosing your juice or messing your build so you will get it where you want it for sure
@isacv2182
2 жыл бұрын
Hi Nathan greetings and congratulations for your new RTA. Nice to see this review I waited for this one since the KF prime is one of my #1 RTA’s and on few points it’s the best. When I get this probably I’ll add KF prime mouthpiece as I don’t like full metal ones since forever. Regarding the X🧐 Maybe You can use the rotating of X to choose To indicate the way the top cap is moving backwards to your needs and preferences. Say perfect 180 degrees to the fire button or 90 what suits you best.
@netvaper
2 жыл бұрын
Thank you Isac. I tried it but i cannot tell if it actually makes a difference to the juice flow, i think the juice flow is fixed & perfect saturation, the only juice flow control i know for sure is by lifting the whole tank to shot it completely when adding liquid as i have shown in the close-up. I might be wrong that by turning the RTA when lifted & in shot position does actually open or close the J/F
@isacv2182
2 жыл бұрын
@@netvaper All right better to edit for others info. Manufacturer description on CDV; “The X engraving on the top cap is an indicator of where to push to slide the cap open for refilling. This can be rotated to your desired position so you can line things up with your mod - especially useful on SBS style devices.”
@isacv2182
2 жыл бұрын
I have seen on some German forum a picture of this with different logo instead of the X the more familiar SVM logo. Apparently they made those as well but I’m not sure if it’s a single batch or more. In a few days my KF X (or SVM lol) should arrive.
@netvaper
2 жыл бұрын
@@isacv2182 thanks for the info I personally would have preferred SVM logo like on the prime & lite mouthpiece
@isacv2182
2 жыл бұрын
@@netvaper I would as well. maybe after the 10 years celebration phase the X will changed back to the familiar SVM I don’t see the point to keep the X after that but it’s up to SVM to decide.
@micklen1970
Жыл бұрын
Hi Excellent review as always. A quick question have you tried the Kayfun X with the Edd Balance SBS 60W TC VW Box Mod ? Does it fit side by side. Thank you
@netvaper
Жыл бұрын
Yes I did Michael and it is a perfect fit. Looks stunning as a kit. In fact I just noticed that the thumbnail of the Kayfun X review is on the Edd Balance so you can see how good it looks for yourself😊
@AtharMansoor
Жыл бұрын
Another excellent review. I am looking forward to buying a Kayfun. Would you recommend the Kayfun Prime over the Kayfun X or vice versa? Also what SBS mod would be a good fit for either of them.
@netvaper
Жыл бұрын
Both are on the top of their game but the X has it all & less moving parts. As for a SBS I currently use the Aspire Sunbox Mixx SBS Mod for the X. The Balance SBS is also used for either
@bassparadise75
Жыл бұрын
The juice flow just opens and closes.It turns only to adjust the top cup for some mods that are low in hight so the cup wont find when you open it to fill with liquid.GREETINGS and thank you for the review.
@netvaper
Жыл бұрын
@Bass Paradise. Thanks for the info, yes I figured it all out already 😊
@-northwest-6636
Жыл бұрын
Hi Nathan thanks for the in depth review on this👍 don’t ask me why but iv just ordered the Kayfun x clone,I really enjoy my Kayfun lite (original) so after watching your excellent review I decided to get one 😊 I just hope the clone is as well built as my spica pro,I think clones these days are hard to tell the difference between the original.. Iv just ordered some mtl aliens from coilology so I’m going to give them a go in the Kayfun x.. I’m looking forward to vaping some juice cabin nets and now la tabaccheria 👌
@-northwest-6636
Жыл бұрын
Also Nathan dose the Kayfun x fit on the mixx side by side ?
@netvaper
Жыл бұрын
@@-northwest-6636 yes it does I actually use it myself on MIXX. I hope you get a good quality clone as with clones on occasion it is a nearly perfect scenario
@-northwest-6636
Жыл бұрын
Thanks Nathan 👍 I will most definitely let you know when I get it,I hope the quality will be just as good as the real thing,one can only hope 🤞 it’s sxk version so I think it will be top quality.iv not even tried the updated air flow yet,I’m still rocking the plastic insert in my Kayfun lite 😂 I can’t wait to give it a try with some Latakia and Kentucky 👌
@antwnhs213
2 жыл бұрын
Now we only have to wait for the Kayfun X Lite
@netvaper
2 жыл бұрын
@M-Set😀 yeah that will be interesting
@erentann
2 жыл бұрын
Hey Nathan, great review as always. What would you suggest for dessert and fruit flavours. I am not into throat hit that much, flavour is much more important. Kayfun X vs Sputnik? I am kind of in between.
@netvaper
2 жыл бұрын
@TE D. Both are the pinnacle for quality of flavour on any profile but for me the Sputnik is more appreciated with tobacco, especially spicy & smoky, the Kayfun X is more of all rounder like the Prime and will be more suited for dessert & fruit as well as tobacco
@erentann
2 жыл бұрын
@@netvaper thank you so much for the insight. I'll go for the X then, maybe I'd get a Ulton clone version of Sputnik later. Best wishes from Istanbul.
@JohanRzymski
2 жыл бұрын
Fantastic review nathen, I do have a 2019 lite too but not used it for over a year, you have inspired me to get that out and give it a go again. Mine is the older plastic screw airflow pin. But this X looks absolutely beautiful. May have too look into it, and ask my misses to get it for my birthday. See will moan as I have around mtl rtas already.
@netvaper
2 жыл бұрын
Thanks Johan. I used the lite for quite a while with the plastic airflow pin as well. I hope your wife will treat you i am sure you deserve it😊in the meantime enjoy the Alberich😉 which is excellent MTL
@JohanRzymski
2 жыл бұрын
@@netvaper loving the alberich and watched your wicking video, though I actually use thicker cotton through the coil then thin the tails. It works for me.
@netvaper
2 жыл бұрын
What ever work for you Johan is fine for you😊
@darrgoe9778
2 жыл бұрын
Really appreciate your reviews. This tank seems almost over engineered and quite expensive. So how does the flavour and throat hit compare to the Brunhilde Mtl tank?
@netvaper
2 жыл бұрын
@Darrgoe. The high price is for good reason as the quality of build of the Kayfun leaves the Brunhilda way behind but as a mid budget MTL (RDTA) the Brunhilda is superb & i love it
@Kevin_Long
2 жыл бұрын
Now we just need to wait for the 22mm
@netvaper
2 жыл бұрын
Maybe so Kevin
@TheHatemail
Жыл бұрын
Hi Nathan. Love your reviews. I don’t hear you mentioning the bishop rta anymore. Is it not on the same level as the Kayfun or Fev?
@netvaper
Жыл бұрын
Thanks. Well the bishop is still one of my favourites & won my best of 2021 and still mentioned the bishop mainly as a comparison to other newer RTA’s and I mentioned the Bishop a few times in my latest upload my best of 2022. To be fair as good as it is for mid budget MTL RTA It is not quite on the same level as the high end Kayfun & Fev though.
@markyd43vaper
Жыл бұрын
I thought it worth a mention that SXK do an excellent version of this tank. I know because I just got one. I had one of the early Kayfuns way back years ago when you had to use a tiny screw in the base and fill via syringe. I was a stickler for the small high end mods and atties, partly because I thought it important to support small ventures but also that the clones avilable then were so poor. Nowadays with so many good mid priced RTAs available I can't justify the cost of a genuine Svomesto. I followed this review carefully and can report (admittedly it's only been a few hours) that whilst I obviously cannot compare it with the original, it seems identical. The base lift for the juice flow and the top lift mechanism for the slide refill all work flawlessly. The machining seems also to be flawless and everything turns as smoothly as I could have wanted. The easy coil placement and wicking together with a seemingly efficient juice flow system make this an easy tank to set up and use. So far the vape quality has been outstanding. By coincidence I too am using La Tabacharia's Virginia, mainly because it's my mainstay currently so I can compare it to other tanks. It tastes perfect and I'm very happy with my purchase (under £40) I trusted SXK with this one as their version of the Holy Atty Mea Culpa is excellent (I have 3). Great review as always Nathan!
@netvaper
Жыл бұрын
Thank you Mark for your detailed feedback that I am sure would be useful to many. Enjoy your Kayfun X Vape experience😊
@CroHOOLIGANs
7 ай бұрын
Original cost more for lot of reasons .Just few examples it's made in EU so taxes and work force , build materials etc cost LOT more than in China. They are limited in product so they can make only certain number of them per year . And most important it takes lot of time to design final product ,, lot of 1 series prototypes until everything clicks on perfect. China don't have copyright laws so they don't spend any money on design so they get original scan it 1:1 and whit same materials but in China SS is cheaper a LOT same as work force , and whit CNC machines whit original measurements it's easy ( I can make clone but 1 piece would cost me 2k $ because I can't get steal and other materials as big Chinese factory) . I don't have problem whit that for me as vaper it's win win situation,,, Chinese will make quality clones for low price ( now they are even seeling clone of clone 😂) so original companys must always deliver TOP products and whit new innovations give us even better products.🤷🏻👍🏻 I always buy clone to see if it's my style of vape then maybe I bay original if it is a keeper . So Vape on ,if it is working it is original
@DeanWnchestr
2 жыл бұрын
the juice flow control has 2 different features! it's just translated badly, or shown in a mistunderstanding way. when you lift up the RTA, to close the juice flow, you can also spin the whole tank around, to adjust the Logo on a mod/side by side mod, so it showing forward or where ever you want to have it. I hope you understand :-) great review!
@netvaper
2 жыл бұрын
Thanks V.M. For your input. Indeed I came to the same conclusion
@kostakisxwl9642
Жыл бұрын
Ur videos are always great. I d like to purchase a high end MTL RTA for once but i m a flavour chaser too. Which kayfun or any high end perform better at flavor part? Are the performing better than a brunhilde?
@netvaper
Жыл бұрын
Hi Kostakis. 2 High End for you to choose that i enjoy immensely & are available in the UK. The Kayfun X that in my opinion is the best of the Kayfun's or the Flash e Vaper VS Dual if you don't mind the shape. and one that you might have trouble finding in stock is the 8C by Luca Creations. All 3 will deliver better flavour then the Brunhilda although not by a huge margin. comes to show how good the Brunhilda is for flavour
@kostakisxwl9642
Жыл бұрын
@@netvaper have u tried a cabeo?
@PappaWas1975
2 жыл бұрын
I’m tempted of course. I couldn’t put my finger on what I didn’t like about the aesthetics of it, but I think it’s the “X” engraved on the side 😂 Not a deal breaker though. Nice one mate!
@netvaper
2 жыл бұрын
Thanks Raspa as I always say taste is so personal I actually like the X engraving as it gives the RTA a unique Kayfun X touch as no other logo is on the RTA but as you say it is not a deal breaker.
@Adrian_Mason
2 жыл бұрын
Looks like another excellent Kayfun. Only one thing puts me off and that is the airocon. Having used the Kayfun lite Plus, I found the wedged tip of the air screw to be a condensation trap that irritated me. I drilled out the pro MTL pin to 1.2mm and screw it tight, made me much happier. I wish that I had bought the 2019 lite instead and the optional 1.2mm center pin. I hope they make some optional straight reducers for the X as a regular 1.2mm is my preference over their airocon.
@netvaper
2 жыл бұрын
Well Adrian, i never had any condensation with the actual AEROKON pin but i did discover that the deck block overtime can loosen and the liquid seeps down into the airflow channels, the simplest solution is to make sure it is always fully tightened, never had a hint of condensation. Anyway i would never attempt to do what you did that is for sure! As for straight reducer i am not sure what is the advantage, as the whole purpose of the Aerokon pin is the easiness to pin-point your airflow to the perfect MTL drew between 0.8 to 1.8mm by just a turn of the pin
@Adrian_Mason
2 жыл бұрын
@@netvaper Like the Bishop pins don't have adjustment is what I prefer as selecting a correct pin gives the airflow I like, there is no need to adjust further. It sounds to me that you have experienced what I did, but I think you just opened the airflow a bit more to compensate? I didn't get condensation in my vape but on the air pin which tightened up the draw and changed the sound. It wasn't a huge deal, but I definitely prefer my Kayfun after my work more than before I did it. I found your review excellent of the Kayfun X 👍
@otgunz
2 жыл бұрын
maybe you buy a MTL PRO pin
@Adrian_Mason
2 жыл бұрын
@@otgunz Yes that is what I converted with the Kayfun Lite Plus and that is possibly my best MTL flavour vape.
@netvaper
2 жыл бұрын
@@Adrian_Mason oh I see what you mean now, so by choosing the right airflow pin you know exactly what airflow size you are using. Makes sense.
@VictimOfFat3
Жыл бұрын
From what I'm understanding, I should use a ni80 core clapton coil for the kayfun, as it seems nickel provides the best flavor for low wattage. Hopefully I'm not allergic
@netvaper
Жыл бұрын
Most are not allergic to nickel but if you are allergic it is not dangerous but apparently you would feel hot & bothered or something similar so switch immediately to other wire material. I always use Ni80 or kanthal & SS on occasion but never Nickel.
@chrisholmes2208
Жыл бұрын
Nice review Nathan topped of by watching in 38 degrees of heat by the pool in turkey 🇹🇷 would you say it was worth the high price purchase when I get back to the uk thanks
@netvaper
Жыл бұрын
Well Chris it depends if you enjoy the high end quality in general not only the excellent flavour that you can get fairly close on cheaper RTA’s. For me personally absolutely yes as I thoroughly enjoy the whole package, quality of material, smooth drew, flavour & the neat upgrades over the Prime & Lite like the top fill mechanism. If you don’t already have a Kayfun I would not hesitate to recommend X. As the for the price, the way I see it, it would cost you like a tank full of petrol nowadays but you would enjoy it for much longer. Enjoy your holiday😊
@TarikulIslam-tr8de
7 ай бұрын
Very informative detailed review Mr. Nathan as always. I am new at Kayfun & even at mtl from rdl/dl, so Can you please tell me that for kayfunx, only kanthal round wire or ni80 better or fused clapton better for flavor output? I am going to purchase today.
@netvaper
7 ай бұрын
Any coil wire will be good on the X but I prefer Ni80 Core Clapton or Fused Clapton. I find it has an edge over Kanthal round wire in regards of flavour. Enjoy the Kayfun X it is awesome
@TarikulIslam-tr8de
7 ай бұрын
@@netvaper thanks buddy, in this case which one u prefer 24awg, 26 or 28?
@netvaper
7 ай бұрын
I don’t make my own fused coils I buy mine pre-made (naturevape) Core Clapton Ni80 1.0ohm 28+38ga. The odd occasion I make my own is only Kanthal round wire 26g. Any other wire type is simply not worth my time and rather buy them all done professionally
@anthonypetrides4799
2 жыл бұрын
have to say love your mtl reviews! Got my hands on the Kayfun X today, and despite what i thought was a flawless build, I instantly noticed gurgling restricting the draw. And if i draw to hard liquid eventually comes up. Any idea on what could cause something like this in this rta?
@netvaper
2 жыл бұрын
Yes Anthony you are using to thin cotton. Insert enough cotton to fill the juice wells fully from side to side. But before you insert the cotton it is vital to cut to the right length by folding the cotton over the ledge to the shelf on outer side of the juice well. Then fluff the cotton well lift and tuck without any folds just hanging down freely touching the base of the juice wells. Also be sure to lift the tank to shot off the juice flow before adding liquid.
@djzhor457
2 жыл бұрын
Is it your first mtl rta? I just bought it today as my first mtl rta
@anthonypetrides4799
2 жыл бұрын
@@djzhor457 no i have a couple and a fair bit of experience building on them. Just found this a tad gurgly so far. Though putting more cotton in my second build has improved it a lot. How are you finding the X?
@djzhor457
2 жыл бұрын
@@anthonypetrides4799 still haven’t set it up yet. And I bought a black note juice that I need to mix and steep, but I think I’m just gonna use it straight away. Because I don’t have anything else to vape
@netvaper
2 жыл бұрын
Beside a bit more cotton to fully fill the juice wells, if you lower your coil to 1-1.5mm above the airflow pin that should eliminate the gurgling completely
@saidyahyaoglu
Жыл бұрын
hello I have the same tank, but I suffer from a problem with it, which is the liquid coming out of the driptip hole. Do you know what the problem is? I also tried layfun lite plus 2021, and the same problem. They are all original thanks
@netvaper
Жыл бұрын
Hi Said. Do you use spaced coils if so, that can cause spit-back like hot droplets of liquid hitting your mouth when you inhale. Is that your issue or is it that the liquid itself comes up the mouthpiece as that is weird
@satriapradana5785
2 жыл бұрын
Nice review, Nathan. I have a kayfun prime here, I have issue with heat when I use Clapton coil. Did that also exist in X? also is it a worth upgrade from prime to x? Thanks a bunch before, cheers 🍻
@netvaper
2 жыл бұрын
Hi Satria I wonder what ID coil you use & wattage. Mine is 2.5mm on 16-18w never had any heat issues on either. As for upgrade my answer is, for flavour & smooth drew alone no need to upgrade from the Prime. For looks, liquid capacity & slide to fill convenience and effective auto juice control & easy shot off lift mechanism, upgrade is an option.
@satriapradana5785
2 жыл бұрын
@@netvaper im using 2,5mm id and got around 0,8Ω, playing in 16-18w. Thanks, nathan for the advice
@netvaper
2 жыл бұрын
@@satriapradana5785 perfect setup. Do you experience heat with simple kanthal round wire as well?
@vmdwhoxo
2 жыл бұрын
Hopefully someday I can buy it.
@netvaper
2 жыл бұрын
I hope so too Vasily 😊
@vmdwhoxo
Жыл бұрын
@@netvaper Is it possible to put Kayfun X 24mm into Aspire Mixx? Because I don't want any scratch in the future.
@netvaper
Жыл бұрын
@@vmdwhoxo yes I use the Mixx myself with the X looks very nice
@vmdwhoxo
Жыл бұрын
@@netvaper Thank you, Sir. I've got this Kayfun X today. First time I touch the quality of high end RTA 🤣. I do like additional SM Cap Ring also. I hope the juice flow control works perfectly. Because it's little bit stuck. 🙏
@gmoe8714
2 ай бұрын
This one is a lovely atomiser and juice flow switch off control and slide filling is excellent vapes great all day I put my kayfun light now in my finished with tray but the X is a lot better and vapes to high standard one I’m going to keep using all the time Thanks Nathan for your excellent selection Vaped perfect straight out the box Still trying to get all of the top 12 But not much chance of a spica pro or a 4.51 Wish I kept in touch with the nature vape site over past year Still to get the bishop and diplomat in future 2 thumps up from Todd’s reviews on diplomat These might be like a lot of other ones unobtainable soon
@netvaper
2 ай бұрын
Thanks GMoe. The diplomat is very good. Enjoy them all.
@unknowndeath829
Жыл бұрын
this video has got me good, ill be buying one next week. what coils do you find the best in the x ?
@netvaper
Жыл бұрын
@Elliot Back. So it got you good 😀 it got me good as well😊 as for coils I use mainly naturevape Pre-made core clapton 1.0ohm coils they are excellent quality and not expensive
@unknowndeath829
Жыл бұрын
@@netvaper brilliant, ive already got a few pots of them from nature, again from advice from videos. thanks for the reply.
@hertugen.online
2 жыл бұрын
First reviewer in English I think you are when it comes to Kayfun X, Nathan. I have some questions. The airpin it comes with, is it the MTL pro pin, or is it the KFL'21 standard pin? The MTL pro pin has a small hole in the middle. I will definitely buy an X, that said, my big Kayfun favorite is the Prime with Air Nozzle Kit, for me it is a bit smoother compared to the KFL'21.
@netvaper
2 жыл бұрын
@hertugen on line. Thanks. The AEROKON pin is not the Pro but butter smooth nonetheless
@papasalioutall6409
2 жыл бұрын
it's a no pro version. And if i remember correctly, old aerokons are not compatible with the X, to be confirm
@hertugen.online
2 жыл бұрын
@@papasalioutall6409 thanks mate
@RonnieRedd
5 ай бұрын
Looking for a good mtl for my friend. I use dtl personally RTAs and RDA'S so mtl's are a whole new world for me😮
@netvaper
5 ай бұрын
Well Ronnie the Kayfun X is one very good choice. It oozes quality and your friend will enjoy it for many years to come.
@jozeffurman5951
Жыл бұрын
Hi, do not have experience with any of Kayfuns ... how it is X version on it in regards of throat hit ? I would really like to know. Thank you 🙂
@netvaper
Жыл бұрын
Very good throat hit on the X Josef
@paymonkayhani4676
2 жыл бұрын
Great review as always! I Do you have a question though. I just received my Kayfun X times four units! One thing I noticed right off the bat is that the top cap even after it is pressed down does not sit tight! It has just ever so slightly though very noticeable clockwise and counterclockwise clockwise wobble or should I say movement! It really bothers me! Am I doing something wrong?
@netvaper
2 жыл бұрын
@Paymont Kayhani there is a slight movement with the top cap. It is the nature of the mechanism that it lifts & lowers very smoothly so too tight would have resulted in a squeaky noise & feel. But the sealant of the top cap is 100% sealed with no air getting in at all and that is the main objective to keep the vacuum. So nothing is wrong just enjoy the amazing vape experience😊
@chrisprocope8
2 жыл бұрын
Yes, definite wobble here as well, less noticeable when the drip tip is in but just enough to bug me.
@hossamnagueb5654
4 ай бұрын
Hi Nathan, what is the difference between ( Kayfun X ) and (kayfun lite plus 2021) and (valor mtl rta) in terms of flavor and throat hit, which is better, I am looking for a strong flavor and medium throat hit, less or more?
@netvaper
4 ай бұрын
Hi Hossam. The X & Lite are very similar in regards to flavour. Throat hit is a bit more noticeable on the X due to its chamber design. Both are better than the Valor on all counts. In my opinion the X is the best of Kayfun and it is a top fill.
@hossamnagueb5654
4 ай бұрын
thx nathan I appreciate your opinions@@netvaper
@alandaly5570
Жыл бұрын
Great review as always. What mods are the prime and lite on
@netvaper
Жыл бұрын
Those 2 are old mods by now I think it was the Innokin Platform edition & Vaporesso Tarrot baby
@MrMrHeino
2 жыл бұрын
This is one of the best....
@netvaper
2 жыл бұрын
I think so too Sven
@chrisalchris
2 жыл бұрын
Thank you !
@netvaper
2 жыл бұрын
You're welcome chrisalchris
@ROBERTBRAVU
5 ай бұрын
Hi Nathan, with my kayfun X SXK I have a problem. If i rotate the air pin, the impedance of coil will be change. I use fused clapton vandy vape pre-build, 0.7ohm. When i build the coil, it is ok, 0.71-0.73. But when i rotate the air pin, when i closed the air, the impedance of coil is 0.93-1.03, why?? And when i put liquid, close the juice flow, in many times the coil will be drowning. I don't understand why? Do you have an explication? Thanks!
@netvaper
5 ай бұрын
Hi Robert. If I understood you correctly that when you tighten the base of airflow pin your coil ohms increase. If that is correct that means the pin is actually touching the coil. Lift the coil at least 1mm above the airflow pin when fully tightened. As for flooding, when you lift the tank off the base that automatically closes the juice flow then you slide the top cap and insert liquid and then lower the tank again. You should not have any flooding.
@ROBERTBRAVU
5 ай бұрын
@@netvaper thank you so much Nathan. That's it, the pin of airflow touch the coil. I will lift the coil. Thank you!
@johnstack5008
Жыл бұрын
I ordered a Kayfun X clone from Fasttech. It's on the way right now. I'm loving my 2 Skyline-R clones. I'm hoping the Kayfun will be as good. The quality on some of these clones is amazing.
@netvaper
Жыл бұрын
Enjoy it John would love your feedback on the X clone
@johnstack5008
Жыл бұрын
@@netvaper The Kayfun X SXK clone arrived today. Quality seems excellent. I can't find any problems. Everything operates smoothly. SXK has a reputation for making great clones so no surprise there. I put on a 2.5mm 27g kanthal coil, about 1 ohm, 60VG liquid. it was an excellent vape. No gurgling, no dry hits, no juice in mouth. A good consistent vape from empty full to empty. So far all is good.
@netvaper
Жыл бұрын
@@johnstack5008 thank you for the update. Enjoy
@wmnadzmi_
2 жыл бұрын
Thank you sir.
@netvaper
2 жыл бұрын
Most welcome Wan
@surotobani3403
Жыл бұрын
Hi Nathan.. This or KF Prime for the best flavor?. Pls advise. Tks
@netvaper
Жыл бұрын
@Suroto Bani. Similar on flavour & deck design for ease of wicking & coiling but the X is more of a complete RTA so go for the X
@SHERMA.
2 жыл бұрын
all these years people have wanted the kayfun clones "with the logo" now people want it without the logo haha! ill be waiting for a cheap clone that comes without the xfactor logo other than that great review thanks again!
@netvaper
2 жыл бұрын
Thanks Sherma i too like the Svoemesto logo, that my Lite & Prime have engraved on the mouthpiece but to be honest it is hardly noticeable anyway. But the visual appearance of the RTA is unmistakable Kayfun for those who know😊
@zackdamon6187
Жыл бұрын
Hey sir...so my order came with my kayfun x and the labs...the labs was easy to wick...but for some reason my kayfunnx keep gurgling and juice in my mouth when I take a vape...this is the 6th time I'm watching this but just figure it out I'm doing somthing wring I had this issue with my lite but that a solved with you videos I'm following those steps as well but it's not working.
@netvaper
Жыл бұрын
Hi Zack. Have you closed the juice flow by lifting the whole tank of the base before adding liquid. Also make sure the cotton ends fill the whole juice well space and not folded at the bottom. Cut to the right length the way I do by folding the cotton ends up to the black 0 ring. If you email me a picture of your build maybe I will notice your issue.
@d.b.cooper2277
Жыл бұрын
I can't seem to get the wicking right... 4 out 5 times I get muted flavor, and the 1/5 times I get good flavor it gives me dry hits after some puffs
@netvaper
Жыл бұрын
@ D. B. Cooper if you follow my wicking method in the close up you should get it right. If that did not help, please email me i would record a short wicking video for you
@MiltonEdrisa
Жыл бұрын
Hi again Nathan, another great review. You deserve so many more subscribers. I have no issue recommending you to anyone I know who has a passion for MTL vaping and/or NET liquids. I just wondered in regards to the Kayfun X, my understanding is that it is (mostly) the same deck and chimney as the KFL 2021, which I already own (along with the Prime and 5S), would you say it is worth buying an X aswell? While I do love the flavour on my Kayfuns, I do get slightly better flavour using the same build on my Dvarw 16mm and FeV. Would you say the flavour is a big improvement or is it worth skipping the X if I already own the KFL 2021?
@netvaper
Жыл бұрын
Hi Jim. If you already own the Prime & Plus there is no need to upgrade to the X as you say the deck on the X is identical to the Plus the only upgrades besides the obvious external appearance is the new Top fill mechanism & lift to shut the Juice flow. As for the Dvarw i find the Kayfun softens & perhaps sweetens the flavours especially on NET's like the Fev, while the Dvarw delivers somewhat sharper flavours but not necessarily better just different.
@alandaly5570
2 жыл бұрын
Waiting for the style one
@netvaper
2 жыл бұрын
I am sure you wouldn’t need to wait for long
@yodayoda4976
2 жыл бұрын
just a wee bit of gushing over the tank mate,lol.but yeah the kayfun range are damn good tanks,this is the first ive heard of this one and its certainly an interesting design.
@netvaper
2 жыл бұрын
@yoda yoda wee bit of gushing... i agree😁
@christosp.
Жыл бұрын
Hi Nathan, I have the kayfun x, I work it at 0.8 ohm and at 16watt I want to lower it to 15watt, what would you recommend that would be better thanks and sorry for my english.
@netvaper
Жыл бұрын
Hi Christos. You can vape at 15w with no problem at all. The wattage is up to you no one else what you find best for you is best for you. I vape always at 16w never change
@christosp.
Жыл бұрын
@@netvaper Thank you, be well.
@unknowndeath829
Жыл бұрын
also would it be ok using 70/30 or is it netter with 50/50 ?
@netvaper
Жыл бұрын
70/30 is perfect Elliot
@maksimbaranov4513
Жыл бұрын
Hello. Thank you for the review! How is throat hit comparing to fev 4.5s+?
@netvaper
Жыл бұрын
@Maksim Baranov. They are both mostly the same on throat hit. Moderate, perfect to my personal preference
@maksimbaranov4513
Жыл бұрын
@@netvaperThank you for the answer, it's really useful information for me. I am using fev 4.5+ as main device and it is really a nice RTA. Throat hit is better and stronger than RTAs which I used in the past had, but nevertheless sometimes I wanna buy something else with even stronger throat hit(I am using 12mg nic liquid). Can you recommend something ?
@netvaper
Жыл бұрын
@@maksimbaranov4513 The only one that i can think of in the same bracket is the Spica Pro. In the mid-budget the Aromamizer Classic comes to mind
@maksimbaranov4513
Жыл бұрын
@@netvaper thanks for the advice , I will check it out
@ROBERTBRAVU
10 ай бұрын
Hi Nate, tell me, between Kayfun X SXK (clone) and Alberich 1, which is better ? I have now Alberich, it is a good ideea to buy a Kayfun X SXK ?
@netvaper
10 ай бұрын
I only have the X original but any Kayfun X SXK or original will be top class vape. Definitely higher league to the Alberich
@ROBERTBRAVU
10 ай бұрын
@@netvaper thanks Nate, i bought the X SXK and you are right, is is another league than Alberich. The taste is more present and the experince with him is unbelievable.
@matteoocchipinti7464
2 жыл бұрын
You should try some Gus atty... Much better flavour than any kayfun, btw kayfun x is a very good atty 😉
@netvaper
2 жыл бұрын
Indeed Gus is well known Matteo but I can’t try them all😊 enjoying my X though
@mohamedameen2881
2 жыл бұрын
I have edge rta but idont no kayfun x is good from edge or no can you tell me pleas thanx
@netvaper
2 жыл бұрын
If you have the original Edge it is very good RTA obviously the Kayfun X has advantages over the edge but flavour wise they are both on a high tier.
@Skywalker37ful
2 жыл бұрын
Hey Nathan, thanks for the review. I have a suggestion for you. Start using round wire 26ga Ni80 7 wraps 3mm. In the Bishop it gave me a great experience for the VCT that I use, even everyone who tries my tank is amazed. The Sputnik I let go, it was a bit over rich and the vape was harshly drying out my mouth. How's the richness on this new Kayfun X compared to the Bishop? If it's a bit more but less than the Sputnik this would be a good buy. The Kf lite plus was quite less rich than the Bishop from what I can remember.
@netvaper
2 жыл бұрын
Thanks Ali. I do use the spec of the coil you suggested but i like to try a core clapton as well, both deliver excellent flavours. The Kayfun delivers rich & rounded flavours with no harshness at all, similar to the Bishop but better in my opinion. The Sputnik is hard core that some find too powerful & some would not have it any other way😊
@Skywalker37ful
2 жыл бұрын
@@netvaper are you sure the Kayfun has richness similar to Bishop but not too intense? Maybe I didn't have the proper coil back then to confirm that. I will be sure to order a Kayfun x clone then. If you can test Kayfun x and bishop with same liquid I would be thankful. My Bishop needs company
@andreivrublevschi5524
2 жыл бұрын
Is it not 3mm too much for such a small deck? I would rather reccomend a 2.25 or 2mm. Maximum 2.5
@Skywalker37ful
2 жыл бұрын
@@andreivrublevschi5524 it works fine in the KF and Bishop, tried it
@netvaper
2 жыл бұрын
@@andreivrublevschi5524 I tend to use a 2.5mm ID with all my Kayfuns. Ali does like his 3mm ID coils😀
@mustafaduha
8 ай бұрын
Hi master Do you know that is 510 insulator of X compatible with Lite 21? Best regards
@netvaper
8 ай бұрын
Thanks for the info Mustafa👍
@mustafaduha
8 ай бұрын
@@netvaper that was a question. Sorry for my bad English. I hope so much you check this. Because I cant find lite plus insulator so wondering are they compatible. if they are i will buy X spare. Waiting your answer in hope. Thanks in advance. Wish you goodness
@netvaper
8 ай бұрын
@@mustafaduha I am away on business perhaps on my return i will some searching for you
@WISHESMASTER13
Жыл бұрын
I think KFX would match with Hadron Lite SBS. What do you think?
@netvaper
Жыл бұрын
Indeed Thiago It would look very nice as a kit. Although the Hadron is a bit on heavy side
@kvo951
Жыл бұрын
Just got this a while ago, my first Kayfun ever. To be honest, it's bulky and kind of a pain to clean and maintain, the aerokon is nice and handy but not smooth by any means, easy enough but not the easiest to build and wick, while flavor is good but not amazing and not worth all the mentioned cons. And I just get this gurgling sound every time I build it no matter the coil diameter or position. The only way to stop it is to loosen the airflow til it's airy enough, which in my opinion, completely kill the meaning of having a mtl rta. Thanks to your recommendation, I hunted for a sputnik and it's still my all time favorite!
@netvaper
Жыл бұрын
@Khang Vo, what can i say, I learned over time that every product is perceived somewhat differently by different people and a particular product for john it is amazing & for mark it is nothing to get excited about 😊 I for one love the Kayfun X & sputnik in equal measures for their own unique qualities. Btw the gurgling happens for a few reasons either you did not lift the rta to close the Juice flow when adding liquid or overfill or you over saturated the cotton when first primed. I do not experience any gurgling however tight is the airflow. Also, the bulkiness to me, is part of the appeal i see it as rock solid that would give me vaping pleasure for many years. So, you see two different prospectives on the same product. I hope over time you get it right to fully enjoy this gutting edge MTL RTA.
@andrewisaac5528
Жыл бұрын
Can I have your opinion on the X or the dvarw? Please and thank you 🙏 ❤
@netvaper
Жыл бұрын
Hi Andrew. Your choice is like choosing a Mercedes or BMW both are on top of the league question is what style appeals to you most. They are both equally excellent on flavour and build quality, the only slight advantage of the Kayfun is the quieter & smoother airflow. I assume price,availability & external look is also a deciding factor.
@AmsterdamF.C
Жыл бұрын
Hi as you know i own two sputnik and a bishop. Is it worth it to get a kayfun x? I want the best vape experience and flavour please give me your honest thought. Vape ban incoming in the Netherlands so i wont have another chance to get a high end tank. Please hope to hear your thought
@netvaper
Жыл бұрын
Hi AC the Kayfun X is a benchmark for quality I highly recommend owning one especially that you would find it difficult to get hold off as you say a vape ban is looming in the Netherlands ( which is insane) Btw the Sputnik is amazing too & not easy to get one in new condition anywhere these days so wise choice on your part.
@AmsterdamF.C
Жыл бұрын
@@netvaper Just picked up the original Kayfun X what a flavour its even better then the Sputnik on my favorite recipe! Wauw insane
@netvaper
Жыл бұрын
@@AmsterdamF.C i am very happy you like the X it is indeed top class. Enjoy it😊
@andreatoth42
Жыл бұрын
Hello all im total new the vaping and help me pls tipp....best starter mtl rta??? And why thx info
@netvaper
Жыл бұрын
Hi Andrea i need some more info are you using a pod kit already or a stock coil starter kit and want to try a RTA
@Beskar181
5 ай бұрын
I guess you can align the X to make it face whichever way you want? Maybe if your mod has a logo too and you want them to be on the same side, or maybe even if you want the tank to slide open in a certain direction?
@netvaper
5 ай бұрын
Yes your are correct. I figured that out very soon after the review. Thanks for your feedback
@baranassif8339
Жыл бұрын
Im confused between kayfun x or 514. The important thing is the flavor I need your advice please
@netvaper
Жыл бұрын
I assume you mean 415 RTA. I would go for the Kayfun X as a all rounder. I find the 415 is best on smoky & spicy blends while the Kayfun X taste awesome on all flavour profiles.
@baranassif8339
Жыл бұрын
@@netvaper thanks a lot
@baranassif8339
Жыл бұрын
Finally Today i bought kayfun x (authentic) after watching your honest review sir, and this atomiser is great and never let me down. I don't have any issues, but the atomiser get warm, not hot. Is it normal, or its an issue? My build is kidney puncher SS316L 26G /2,5/ 6 warbs spaced. Last question which build recommendations you advised to get best flavor (i Vapes tobacco)
Пікірлер: 389