Looking to save money on car parts? Check out all my discounts below: linktr.ee/Slow... Link to Intake manifold: amzn.to/40fPck6 Instagram: @ slowintegra
He said she knows how to drive but she's gonna burn up the first clutch. Pablo sleeping on the couch after that lol
@MistrMcGill
Жыл бұрын
The best thing about this is that it's your car and you get to do what you want. Fk the haters 💯
@DJDM87
Жыл бұрын
Just so you know auto and manual starters are interchangeable on kseries
@Straightupg_813
Жыл бұрын
Looks great man I'm doing the same swap to my Sedan right now
@CraaaigV302
Жыл бұрын
Who cares if people hating they not putting out the money for the build 😂 nothing wrong with XTD clutches i ran them on several setups including a K20A2 swapped DC2
@budgetbuild914
Жыл бұрын
Great video this integra is 🔥 I love the color that k series looks so good in the bay... would be sick if ya do a sleeper build stock exterior slap on some steelie wheels with oem hubcaps & r888's. Can you do a price break down on how much ya spent to go k in the future once ya are done with it.
@hallowmerc1997
3 ай бұрын
Bump. Did we get a build price?
@hxhdfjifzirstc894
Жыл бұрын
Looks good... the only thing I hate is the wonky thermostat housing (because I would never want to fix it, when it starts leaking). I'd rather just get the right housing, or make the hose long enough that the bend is smooth and gradual. I mean, the water pump is going to push the coolant through, right?
@saticritatis2503
Жыл бұрын
That teggy is going to be so much fun to drive, I have a similar set up on my ep3, k24a+type s oil pump,skunk2 long tube header and ive beaten k20z3 08 si and its so much fun to drive. So much torque.
@M.TTT.
Жыл бұрын
when my k20 in my ep3 blows, I'd definitely want to try this swap I think. Do you have to go to a tuning shop afterwards?
@gsrturbo3786
8 ай бұрын
Yes get most.out of swap @@M.TTT.
@kaybevang536
3 ай бұрын
For the EK and EM1 guys ypu can use a EG 92-95 or DC 94-98 Integra Subframe for K Series
@xxfilthydxx1273
Жыл бұрын
Love these 4 door integras
@civicpride1986
Жыл бұрын
Good stuff.. Can you estimate how much did all that ran?
@Dcdc956
10 ай бұрын
10k easy
@CraaaigV302
Жыл бұрын
Wtf why wouldn't u just unbolt the abs unit u dont have break any brake lines loose just unbolt the abs unit and the brackets that hold the lines to the chassis and u literally only have to get someone to hold the abs pump up and u will have plenty of room to get to the spot welds instead of hacking the chassis up with a cut off wheel
@jjzay8926
Ай бұрын
Dude my teggys b18c just blew yesterday and I've been hoping it would blow soon so I had a reason to swap it to K series but I didn't know you could just slap on a 6 spped like nothing on it
@boyflexnv
Жыл бұрын
My cheap exedy has been taking a beating through the entire stages my car has gone through. Rsx NA, turbo FWD, and now 4 months of complete abuse on turbo AWD
@daltonwyatt9282
2 ай бұрын
Do you have a video on how ypu wired in the ac? Also any tips that made it easier thanks havemt been able to fine really any decent ones here on youtube
@M.TTT.
Жыл бұрын
Will be interesting to see how that intake manifold and throttle body do, I'd guess they'd be fine other than the mating surfaces may be not perfectly flat or the bushings for the TB may wear out faster. No reviews online that I saw.
@cbdreamer1709
Жыл бұрын
Super cool swap
@cbdreamer1709
Жыл бұрын
I build my babe a car
@tonesmith4652
Жыл бұрын
Will this work for eg? I’m trying to do a swap in my eg. Nothing crazy but would like to go k swap
@tigris4149a2
Жыл бұрын
ive made 400hp on a xtd clutch. people just dont know how to maintain stuff.
@Jdmgeek
Жыл бұрын
Wat ecu are u going to run?? And what harness
@556reese7
Жыл бұрын
can i buy the b series?
@JoeyAndVehicles
8 ай бұрын
How can you tell the difference between manual starter and a automatic starter?
@CraaaigV302
Жыл бұрын
That thermostat is gonna leak u can't run it like that several people have tried ur not the first one to find out u can rotate it thats why ppl made the swivel Tstat housing because that way dosent work
@hxhdfjifzirstc894
Жыл бұрын
I don't trust it either, but for the cost of a thermostat housing, there's no way in hell I'm gambling on 2 bolts holding it tight. I HATE fixing stuff, especially if I could have just paid $100 to do it right the first time.
@yeahman1756
Жыл бұрын
Why not do a abs delete with Integra Rs break parts.. that abs is always crap on the dash leaking for most integra i've driven and seen.
@kyletaboo4006
2 ай бұрын
Did you use a stock rsx radiator?
@jonathanfajardo5056
4 ай бұрын
Im curious, how did you clear the ABS bracket? When installing the mount?
@jonathanfajardo5056
4 ай бұрын
Update, I unbolted the pump bracket and held it up to get the bolts in. Not easy, definitely recommend having a partner helping out - makes it easier to line up bolts with the torque mount.
@SPTuning
4 ай бұрын
i did the same :)
@mattminnich3886
11 ай бұрын
part numbers are dame on starter....im doing same swap.did i read somethin wrong
@Juggin2hard
6 ай бұрын
Can I run a 5 speed from a rsx or would I have run the 6 speed from a rsx type s bc k24a I am getting is coming from a tsx and I don’t wanna run a 6 speed
@Ry8ean
Жыл бұрын
Are you 100% sure you cant use the auto starter?
@mmiisaproductions
Жыл бұрын
what do you guys plan to do with the b-swap?
@Rsxnation0
Жыл бұрын
You gonna daily the integra ?
@beethao5578
Жыл бұрын
Shit them xtd clutch kick ass . I kick alot of ass with that xtd clutch .
@CraaaigV302
Жыл бұрын
U hacked off the mount and still had to unbolt the abs so u coukd fully bolt the motor mount and bracket on 😂 i hope u atleast sprayed some paint in the area u grinded
@applepoop10
20 күн бұрын
My CR-V has a K24A1.
@401kid6
Жыл бұрын
no no no no NO! Do NOT use that janky ass thermostat. Get yourself a 2008-2012 Acura RDX thermostat housing and thermostat. It will line up perfect no issues. If you run that janky ass thermostat i promise you will have coolant leaks.
@frias2287
Жыл бұрын
Nice one bro l have eg turbo swap h2ba7
@CarlosAlvarado-tc2gm
Жыл бұрын
Are you gonna sell the engine? I might be interested in it.
@CraaaigV302
Жыл бұрын
My guy loves that cut off wheel definitely your favorite tool 😂😂
@tiffanyvirgilio6672
26 күн бұрын
What motor mounts did u use?
@FR11
Жыл бұрын
#SENDITPAPI 🔥🔥🔥
@abelalaniz9158
Жыл бұрын
NOOOOOOOOOOOOOOOOOOOOO do not use an xtd clutch kit from personally experience ive used that brand trying to be "cost effective" and i ended up having to not only replace the clutch itself it also killed my thrust washers so i had to swap those out not worth it.
Пікірлер: 51