Mind blown 🤯 every time I think 'ok, I got most all of the fundamentals', you address some topic I'd never even considered, or rather found all the wrong ways to muddle thru.
@joshuawright7052
2 жыл бұрын
Mate, your energy, enthusiasm and knowledge helped explain the concepts perfectly for a beginner. Thanks!
@KeithBarker
2 жыл бұрын
Thank you Joshua Wright!
@solomonjames8116
3 жыл бұрын
Thank Keith Barker for helping us improve our CCNA skills
@KeithBarker
3 жыл бұрын
Happy to do it, thanks for the feedback Solomon James.
@geoptus
Жыл бұрын
Hey Keith, so grateful for this vid - was having the same problem and it was absolutely doin' my head in 😂. This seems be the same case for an integrated unit, like say the 829. I'll be duplicating this lab with a Cisco 897VA in my physical lab kit, so will be interesting to see if it's the same for the real stuff too 😋. Dude! This is my first comment since starting to watch your playlists a few weeks ago and wanted to say a huge thank you 😊👍 for putting out all this amazing content - SubnetSaturdays has been such a boost too, I thought it was going to take me months to get my head around subnetting but your teaching methods work so well. I believe the last few years have been a golden era for learning with so many educators such as yourself, Network Chuck, David Bombal and many others putting out so much quality content, both for free and very affordable access. True Educator Heroes 🌟
@KeithBarker
Жыл бұрын
Happy to do it, thanks for the feedback George Kaimakis.
@MohamedAli-yw9nz
4 жыл бұрын
Hi Keith Congrats for the 100K sub's u deserve million subscribers
@KeithBarker
4 жыл бұрын
Thank you so much 😀
@aurighinalgansta4912
4 жыл бұрын
Happy birthday 🎊 to the OGIT. I notice that in a real router with EtherSwitch Module, you can also use the regular VLAN command even if the contextual help is talking about ISL... I suppose that packet tracert support only the VLAN DATABASE command.
@KeithBarker
4 жыл бұрын
Thank you Aurighinal!
@emeryclark
4 жыл бұрын
Thanks for the video tip! I have a 1921 with a EWHIC-4ESG and a 3750 and was having trouble understanding this just yesterday. Saw your post on reddit, viola. Perfect timing. Subscribed and looking forward to more videos!
@KeithBarker
4 жыл бұрын
Glad it helped
@simbadurio444
2 жыл бұрын
Thanks Keith, I needed this information and the pep talk at the end. Much love OG....
@dreamsofinvasion
4 жыл бұрын
You are amazing!~ Thank you for being here for us, even on your birthweek.
@KeithBarker
4 жыл бұрын
You are so welcome
@rahulkushwah9022
4 жыл бұрын
Hello keith, thank you so much for making such great videos. I always look forward to a new upload. I really like the way you explain the networking concept.
@KeithBarker
4 жыл бұрын
Glad you like them!
@hamzaghazi7485
4 жыл бұрын
Happy Birthday Keith. Love the Live videos and troubleshooting videos. Would love more content on packet tracer. I hope your channel g to number 1 in networking on youtube
@KeithBarker
4 жыл бұрын
Thank you Hamza!
@zadkieladdae8145
4 жыл бұрын
100k subs, good work deserves great rewards.
@KeithBarker
4 жыл бұрын
Thank you so much 😀
@nickfletcher4201
4 жыл бұрын
Aaargh, thanks for this. Been bashing my head trying to work out why 'vlan 10' did not create the vlan like it did on the router. Thanks for the #packettracer workaround
@saibot293
4 жыл бұрын
Again Thank you for taking the time to help me out. Great content great teacher. Happy birthday.
@KeithBarker
4 жыл бұрын
My pleasure!
@jims599
4 жыл бұрын
Happy Birthday Keith
@KeithBarker
4 жыл бұрын
Thank you Sankara!
@ryanrrothwell
Жыл бұрын
thanks Keith
@lavglidesgh6266
2 жыл бұрын
you get a new subscriber with the intro. it could mean a great tutor
@KeithBarker
2 жыл бұрын
Thank you lav glides gh!
@mohammadkhan8712
2 жыл бұрын
Hi Thanks for the VLAN database creation tip before VLANs int can be up!
@sonergezgen8704
4 жыл бұрын
Hi Keith, you're doing amazing stuff for beginners ! Thank you so much for that. Would you consider to explain why we should use logical SVI's in stead of psyhical layer 3 interfaces on a switch (with no switchport command) or any loopback interface which is logical too ? Thanks and keep doing what you are doing is just amazing.
@KeithBarker
4 жыл бұрын
Thank you for the question Soner. Check out this playlist ogit.online/sloth In that playlist there are several videos about multi-layer switching and Switched Virtual Interfaces (SVIs) that I feel may help to answer that question. Check those out, and let me know if you have further questions, and if so I would be happy to elaborate.
@williamedwards2096
3 жыл бұрын
Mr. Barker, Thank you for all the fantastic content you put out. Does the CCNA go deep on layer 3 switches? all the materials I have seen mention it, but that's about it. I would like to focus my studies where it will get the best return. I understand they might be more popular in the wild than the test would have you believe. I can do a deeper dive after the exam if that's the case. Thank you in advance.
@KeithBarker
3 жыл бұрын
Thank you William Edwards. Feel free to join my Discord sever. Lots of people there helping each other out. Each Saturday at 10am Pacific I hold my "Office Hour" where learners can ask questions about the topics they are studying. Mostly focusing on Cisco CCNA 200-301 topics. Feel free to join us there live if you are available. Here is the link ogit.online/Join_OGIT_on_Discord Thanks again William Edwards!
@EA-fb7ug
2 жыл бұрын
Thanks you
@fernandovillarreal7544
2 жыл бұрын
Thank you
@KeithBarker
2 жыл бұрын
You're Welcome!
@arunsingh252627
3 жыл бұрын
"vlan database" command on the router is applicable only on Packet tracer with switch module in the router or is this something we can use in actual enterprise network using putty ???
@jbp48080
4 жыл бұрын
I just signed up on your webpage, thanks..
@KeithBarker
4 жыл бұрын
Thank you J Powers!
@klkiley2922
3 жыл бұрын
Thanks you for the content. Although informational, I am still confused about a few things. They are as follows: 1- Why would I put a switch module on a router, if, as you said, the idea is for a router to be involved on a vlan when I could use a multilayer switch with routing? 2- Going back to another video and lab; If I have a multilayer switch, connected to a router, with interface vlans on them, configured as default gateways, then how does one get the MLS to get traffic to the router of the interface in which it is connected? ( I have been wondering about this one for a bit) Thanks in advance.
@KeithBarker
2 жыл бұрын
Thank you KevKrazy90. Feel free to join my Discord sever. Lots of people there helping each other out. Each Saturday at 10am Pacific I hold my "Office Hour" where learners can ask questions about the topics they are studying. Mostly focusing on Cisco CCNA 200-301 topics. Feel free to join us there live if you are available. Here is the link ogit.online/Join_OGIT_on_Discord Thanks again KevKrazy90!
@zoltron30
3 жыл бұрын
Hmm I did this on real hardware with the same 4 port fast ethernet wic in my 1841 but my vlan 30 is up but down at layer 2.....I have to lab this again... Well i figured out my issue as I didnt realize the port fast ethernet 0/0/0 is read from right to left on the wic card... But now when I create the vlan on the 1841 from vlan database and do a show vlans it says the vlan does not exist and I get vlan mismatch errors between vlan 1 on my router and vlan 30 on my switch... I put the port's on the switch port module into vlann 30 but when I issue show Interfaces trunk I don't see the port's in vlan 30... Correction.... I found the vlan on my router, I had to use show vlan-switch command.. I fixed all the issues... I wasn't changing the native vlan to 30 on all of my devices and setup eigrp. Very good lab Keith thanks
@sharjahvloger
4 жыл бұрын
Hi Keith. Thanks, for the wonderful videos. Can you please make a packet tracer video on Cisco.WLC configuration by using wlc 4404 controller. Actually, I am using mentioned controller in my campus network, with with bunch of 3502 aps. My clients drops the wifi for 5 seconds and than it comes back automatically. Is there any wlc configuration issues?
@utkarsh0
4 жыл бұрын
4404 WLC with 3504 APs, man those are ancient devices! Anyway, I'd start isolating the issue if it is SSID-specific, location-specific (any particular meeting room/floor, etc.), client-specific (identify the device type/client wireless adapter) and whether the client drops off of wireless or loses L3 connectivity, etc. Then capture the client debugs (you can keep the debugs running for a test client and wait for the issue to appear) on WLC to see what's going on.
@TheFriedLife
4 жыл бұрын
Hello Keith, In real world scenario do we install switch module in a Router?In which scenario do we use switch module in a router?
@aurighinalgansta4912
4 жыл бұрын
Arijit Das yes, I a real work you can install a switch module. For example this is my scenario: I have a Cisco 2901 router with ADSL Interface for Internet, 02 GigabitEthernet interfaces, but I was needed additional interfaces with PoE for Access Point and IP Phones, so instead of buy a real PoE Switch that will take space and consume more power, I have just purchased a PoE EtherSwitch module and plug-in inside the Cisco 2901 and voilà, job done.
@KeithBarker
4 жыл бұрын
Thank you Aurighinal!
@behzadkhayam4956
3 жыл бұрын
Hi Keith, pc2 in VLAN 20 wants to ping pc1 in VLAN 10, how does R1-HQ forward the packet, and through which port/s? Please
@KeithBarker
3 жыл бұрын
Thank you for the question Behzad Khayam. PC2 would use it's default gateway. That router (or multi-layer switch) would forward based on its routing table. For all the L2 connections between MLS2 and the other switches, STP would control which literal ports are used to forward. The costs for STP, and who the root is for VLAN 10, would be used by STP to determine the physical ports that actually forward the frames.
@behzadkhayam4956
3 жыл бұрын
@@KeithBarker Thank you so much
@bgfiras4363
4 жыл бұрын
Hello Keith ,what's the ifférence between ios and IOU images in gns3?
@KeithBarker
4 жыл бұрын
IOS is the operating system that can run natively on a Cisco router. IOU is IOS on Unix, that was designed to run in an emulated environment.
@nanimonada9860
4 жыл бұрын
I've heard of a later 3 switch, but a LAYER 2 ROUTER?!?!?!
@KeithBarker
4 жыл бұрын
Thank you Nanimo Nada. A device that primarily makes forwarding decisions based on Ethernet layer 2 addresses, is a switch. A device that primarily makes forwarding decisions based on IP layer 3 address is a router. A device the can do both is commonly referred to as a multi-layer switch. Happy studies.
@bgfiras4363
4 жыл бұрын
keith what's appliance in gns3 and what's its role ?
@KeithBarker
4 жыл бұрын
docs.gns3.com/1MAdxz0BSEAfGM7tA-w-o3TMmf8XOx7nBf0z6d9nRz_c/ This above link should help with that question.
@yassenaf8858
3 жыл бұрын
can we do a switchport int on that vlan you created on th e router
@KeithBarker
3 жыл бұрын
Thank you for the question Yassen Af. Unless the router has a switchport module, (and is not a multi-layer switch), it would not support an SVI (switched virtual interface).
@dhananjayakurukulasooriya227
4 жыл бұрын
plz do a video about the VoIP configuration .....
@KeithBarker
4 жыл бұрын
Thank you Dhananjaya for the suggestion. Currently I am focusing most of my KZitem content at the Cisco CCNA level, but will keep your suggestion in the queue as a possibility in the future. Thanks again for the idea.
@terrykilpatrick5799
4 жыл бұрын
Hey Keith, exactly how do I get to this discord server you speak of?
@KeithBarker
4 жыл бұрын
ogit.online/Join_OGIT_on_Discord
@terrykilpatrick5799
4 жыл бұрын
@@KeithBarker thanks! :)
@terrykilpatrick5799
4 жыл бұрын
@@KeithBarker Happy belated birthday! I too will join you at the great young age of 56 in June of this year!!! Wishing you many many more!!!
@adriangriffith9039
4 жыл бұрын
getting feedback
@aaronmckeever3601
4 жыл бұрын
Thanks for the video Keith, but its hard to take you seriously when you are dressed like that.
@KeithBarker
4 жыл бұрын
No doubt. Keeping it a little fun in this interesting times. Thanks for the feedback, and happy studies. Master playlist is here: ogit.online/sloth
Пікірлер: 70