it dosent for me, witch version you got? (dji fly app)
@KataNyoron
8 ай бұрын
Hi, I wait for my drone to update Home point and follow all steps but it didn't work, any solution? Mavic 3 FW Ver 01.00.1300 RC Pro FW Ver 03.02.0700 RC App Ver 1.12.6 Thanks Edit: My error, not only update home point, the drone must acquired GPS (in white label) while entering transfer mode to activate FCC. Everything is fine now!
@DroneLifeLelystad
11 ай бұрын
Yessss finaly for the RC Controller thanks 🎉🎉🎉
@DroneTweaksSupport
11 ай бұрын
Enjoy it :)
@GerryM.
11 ай бұрын
Hi. I just bought the app and tried it there now on Mini 4 Pro with RC 2. Everything went as planned and saw the expected change in the transmission graph. Flew out about 600~700 meters and suddenly lost all connection. RTH kicked in and transmission graph went back to CE mode. Tried again and got the exact same result. Is anyone else having any problems with the mode resetting mid-flight? Is the mode only resetting because the connection gets lost temporarily? Any advice?
@UKDroneGeek
11 ай бұрын
His web page states exactly this. If you loose connection, it looses the FCC hack and RTH kicks in as normal. But 600-700m doesn’t sound far.
@GerryM.
11 ай бұрын
@@UKDroneGeek weather permitting, I plan to twist the year over the weekend in a less WiFi congested area.
@syscoresmart
5 ай бұрын
Have you resolved the short FCC transmission distance issue?
@MasRuday
16 күн бұрын
is this app suitable for rcn2 remote (without screen) for DJI Mini 4 Pro?
@dronetweaks1429
15 күн бұрын
yes, sure, it's actually better with RC-N2 and unlocks more features
@jimthorleydronefootage
11 ай бұрын
Cheers florin step in the right direction my friend
@Lucifer0007
13 күн бұрын
Not available for Mavic 2 Pro and Smart Controller?
@dronetweaks1429
13 күн бұрын
With smart controller no, only with standard controller.
@mmdigitalcenter
5 күн бұрын
I have done fcc on my rc2. but when rc2 is turned off. the signal goes back to ce mode. is fcc mode not permanent?
@dronetweaks1429
4 күн бұрын
For the smart controllers, the short 15 seconds procedure must be done before each flight.
@neshac4
4 ай бұрын
I bought a mod today and i cant get it to work on my mini3 / rc combo. On your website mini 3 is listed as supported.
@dronetweaks1429
4 ай бұрын
@@melowski281 Mini 3 non-Pro? That's not compatible with the RC, only with the normal controller (without screen). See list of drones supported with the RC here: www.drone-tweaks.com/dji-rc
@dronetweaks1429
4 ай бұрын
Mini 3 non-Pro? That's not compatible with the RC, only with the normal controller (without screen). See list of drones supported with the RC here: www.drone-tweaks.com/dji-rc
@egimessito
Ай бұрын
i did with mini 3 pro but no luck so far
@ulissessm
22 күн бұрын
@@dronetweaks1429 i bought The app and in this screen looks like it works with air 2s and DJI RC, but don't.
@pieroqiu4195
11 ай бұрын
Now dji rc pro frequency remote control can also be used in [FCC] mode?
@dronetweaks1429
10 ай бұрын
correct
@DroneChalkidikis
15 күн бұрын
With latest update Mavic 3 and avata 2 work? And is safe?
@dronetweaks1429
14 күн бұрын
Hi, yes.
@destancetin8290
Ай бұрын
After updating, it is said that this process is not done?
@DanielKravetz
2 ай бұрын
I don't mean to be rude, but I just can't see any differences when zooming in on both CE and FCC modes. In both cases, the yellow line is at about 4km
@dronetweaks1429
2 ай бұрын
The yellow/green line only represents the local interferences, that is irrelevant. Look at the position of the "1km" text on the right. In CE it is aligned with the 90dbm horizontal gray line, in FCC mode it moves up significantly.
@MrYotuner
2 ай бұрын
@@dronetweaks1429 Me, too, I seem to miss something, neither on your video nor on my controller (RC2 / Air 3) I see a difference (movement) of the 1km text?! Perhaps a video that corresponds with the current (most recent) DJI-App would be helpful? Thank you in advance!
@dronetweaks1429
2 ай бұрын
@@MrYotuner at 0:52 in this video you can clearly see the "1km" text higher than the horizontal line (FCC mode). By contrast, at 0:22 that same text is exactly leveled with the horizontal line (CE mode).
@MrYotuner
2 ай бұрын
@@dronetweaks1429 Thank you very much, your support is much appreciated, now I finally understand, what you did mean! Thanks!
@jaromirjurena8137
11 ай бұрын
Hallo. How I can recognize that RC2 is in FCC mode. What is the difference between the transmission screens in CE and FCC mode. Thank you foe answer in advance. Jaromir
@edwardsp1916
11 ай бұрын
It's shown in this video. The 1km sits higher above the line in FCC mode when compared to CE.
Hi. Thank you for the answer. Nevertheless i have measured by application ruler and amount of the pixels at the 1 km line is the same. Tell me please why? Thank you Jaromir @@edwardsp1916
@stefanben6467
Ай бұрын
Hey Guys, thanks a lot for that Mod so far. Do you think u can deliver a Altitude Hack for the 120m in Europe? The Release has been a while so i m curios if it can be done, otherwise i will switch to the mini 3 pro.....thx
@stefanben6467
Ай бұрын
Im running the RC2 controller
@dronetweaks1429
Ай бұрын
@@stefanben6467 we're working on it, we'll let you know if we succeed.
@georgedamato9743
6 күн бұрын
Does your application works with android 14?
@dronetweaks1429
6 күн бұрын
It depends on the phone model, please contact the support team on the website chat.
@The.NatureGuy
3 ай бұрын
Is it worth it? I fly my drone at lost places where the CE Signal gets very weak when it's trying to get through the old thick walls of the abandoned houses
@dronetweaks1429
3 ай бұрын
That's the point of this, to improve signal for such situations :)
@dooronron69
2 ай бұрын
Does this still work in July 2024
@dronetweaks1429
2 ай бұрын
Yup
@ondrejmarkowicz9853
11 ай бұрын
Download link?
@almostcurious
Ай бұрын
Still working for the latest firms for RM330 and mini 3 pro?
@almostcurious
Ай бұрын
I answer myself after purchasing the app. It works perfectly in the latest version as of today.
@dronetweaks1429
Ай бұрын
Hi, yes, all good, enjoy it :)
@siffasafiqah4998
21 күн бұрын
@@dronetweaks1429need login to fcc fly app?
@UKDroneGeek
11 ай бұрын
If I’m using an iPad as my IOS device, I presume the process still works. ???
@DroneTweaksSupport
11 ай бұрын
sure
@arndt4985
2 ай бұрын
Hi,we misunderstood each other. I don't mean what phone it was recorded with, but rather what kind of phone it is that's lying next to the controller.
@dronetweaks1429
2 ай бұрын
That's what I said, the phone next to the controller is a Samsung S21 Ultra running Android 14
@Alexis23587
6 ай бұрын
how to do basic RC without the screen please? I have it but it doesn't work do you have a video to explain please
@dronetweaks1429
6 ай бұрын
Hi, for the standard controller you just replace the official app with the drone-tweaks FCC app and fly the drone as usual, there's no special procedure to do. See more here: kzitem.info/news/bejne/2ah-r4OViqGUiHY
@crisdiez8507
Ай бұрын
Hello I have the DJ mini 3 and I have a radio control with screen will your application be working soon?
@dronetweaks1429
Ай бұрын
At the moment, the standard Mini 3 is only supported with the standard controller (without screen). We are trying to add this compatibility as well.
@crisdiez8507
Ай бұрын
@@dronetweaks1429 Technically it's probably work but if you got there with the mini 3 pro I hope that with the mini 3 soon I will have good news
@DanielLewisSEO
5 ай бұрын
What is the FCC mode vs the normal?
@jorisbonson386
5 ай бұрын
"Because CE regulations are much stricter, the drone needs to turn its radios way down, from an FCC allowed noise of 26dB on 5.8Ghz all the way down to 14dB for CE, which is a very big difference given the logarithmic nature of the dB scale. For Ocusync 2.0 drones (Air 2, Mini 2, Mavic 2) for example, this drops the maximum range from 10km to 6km and offers much less stability at close distances when going behind obstacles like trees or houses or when flying in area with high interference. The 5.8Ghz band (mostly used in urban environments) is even more limited than the difference in maximum range (obtained in 2.4Ghz) would suggest. The FCC mod allows the drone to bypass these restrictions and turn its radios to full power. Furthermore, the FCC mode enables frequencies that are disabled in certain countries (e.g. 5.8Ghz is re-enabled in Russia and Israel). If you are already flying in an FCC country (e.g. U.S. / Canada), this mod won't do anything for you as your drone is already transmitting at full power. The only reason to get it would be if you're planning to travel abroad."
@lamprosdimitriou5154
11 ай бұрын
Does it works for mini 3 pro Rc last filmware version V 01.00.0700 ? Thanks!!
@dronetweaks1429
11 ай бұрын
Yup
@capitancairlblandford5785
8 ай бұрын
how to remove the NO FLY ZONES from the DJI mini 4 Pro?
@dronetweaks1429
8 ай бұрын
We can't help with that unfortunately.
@marpry1669
9 ай бұрын
I have a problem. Samsung S22 Ultra Android 14. The application immediately crashes when launched and cannot be launched. Don't know what the problem is?
@dronetweaks1429
9 ай бұрын
Hi, Android 14 is not fully supported yet, we are working on it. Please contact us via email or the website support chat for more information.
@LucasJaluL
9 ай бұрын
This works in Brazil? I will buy right now, do you offer a support? Thank you
@dronetweaks1429
9 ай бұрын
It works anywhere. There is support on the website or via email.
@coegbrochannel2050
7 ай бұрын
We need to repeat that's step every take off?
@dronetweaks1429
7 ай бұрын
For the smart controllers, yes, this short procedure must be done before each flight
@GetElectricGR
7 ай бұрын
@@dronetweaks1429 Hi, i have (unfortunately) done all of the updates on the Mini 4 Pro (drone and RC2). Does the mod work with them? Does it also remove the 120m height limit? I have 1.00.0300 FW on the drone and 2.00.500 on the RC2. Thanks.
@dronetweaks1429
7 ай бұрын
@@GetElectricGRHi, all firmware versions are supported. The 120m limit is only removed if using the standard controller (RC-N2).
@ozerkarasu6162
9 ай бұрын
How do we know if it is in FCC mode? Do we need to do these steps over and over again before every flight?
@dronetweaks1429
9 ай бұрын
Hi, please check the “HOW DO I KNOW I'M IN FCC MODE?” area from the FAQ page for explanation and sample images on checking whether you’re in FCC: www.drone-tweaks.com/faq For the RC, the procedure must be done before each flight.
@Timkil
10 ай бұрын
is it possible to install the DJI FCC tweak app directly on the remote so this can be done without a phone ?
@dronetweaks1429
10 ай бұрын
At the moment, no.
@handaka2011
8 ай бұрын
Hi, after Update firmware newest, i can not connect FCC mode. In December its work (Dji RC2 and Dji Mini 4pro and Android 13 Samsung A54 hanphone), can you solve this problem.
@dronetweaks1429
8 ай бұрын
We have support both via email and chat on the website, KZitem really isn't the place to have a conversation.
@TheKaluNaama
7 ай бұрын
@@dronetweaks1429 Well, it is relevant as I am getting an Air3 and want to know if a firmware update will just break this FCC hack completely. You should have like a notification on your website, when buying the FCC mod, that it is compatible with latest firmware or money back.
@dronetweaks1429
7 ай бұрын
@@TheKaluNaama All firmware versions are supported, this *is* mentioned in the FAQ section. People can run into problems for a variety of reason (e.g. not allowing the home point to be updated, forgetting to login with drone-tweaks credentials etc), I hope we can agree that the comments section of a KZitem video isn't the place for having such conversations with dozens of people over and over and over again... that's what all the support channels listed above are for.
@kostas_TT
5 ай бұрын
Works with mini 3 pro dji fly version 1.13.1 (1030) official?
@dronetweaks1429
5 ай бұрын
Yup
@planesstevee
5 ай бұрын
hi mate will this work for the mini 3 standard With DJI RC Remote? Thanks
@dronetweaks1429
5 ай бұрын
Hi. Unfortunately no, your drone is only supported with the standard controller. See list of drones supported with RC here: www.drone-tweaks.com/dji-rc
@planesstevee
5 ай бұрын
@@dronetweaks1429 Thanks wish if i got the pro, the only reason i did not is because of the obstacle avoidance which i dont need. I got 7.6km out with the mini 3 in low wifi area. managed 14000 feet in built up area. Thanks for the reply mate
@giovanninargi1294
2 ай бұрын
Si può fare con Dji air 2s?
@dronetweaks1429
2 ай бұрын
Hi, for the Air 2S we can only help if using the standard controller (RC-N1, without screen)
@zamrirahim
11 ай бұрын
this procedure need to be only one time or every time
@DroneTweaksSupport
11 ай бұрын
before each flight
@acidkhmer
8 ай бұрын
I was going to buy your apps but they re still an issue on Samsung 23, 24 ultra + Mini 4 pro last Firmware version + Remote RC2 last firmware version?
@dronetweaks1429
8 ай бұрын
Android 14 is not fully supported yet
@RapInstrumentalsLemonsProdcom
8 ай бұрын
when thant? its not working for me@@dronetweaks1429
@acidkhmer
7 ай бұрын
@dronetweaks1429 any news about compatibility issue with android? Ty
@dronetweaks1429
7 ай бұрын
@@acidkhmer not yet unfortunately
@arndt4985
2 ай бұрын
Hi, can you tell me which phone this is and which Android version?
@dronetweaks1429
2 ай бұрын
Hi, the video is done using a Samsung S21 Ultra running Android 14
@alb3rt4
8 ай бұрын
Can unlock CE googles 2 + mini 4 pro too ?
@dronetweaks1429
8 ай бұрын
Yes, choose iOS or Android from here: www.drone-tweaks.com/drones/dji-mini-4-pro
@khairul-lw2pd
10 ай бұрын
1 years licence support or unlimited time?
@dronetweaks1429
10 ай бұрын
Hi, The license is valid for one year, it includes free updates as DJI releases new versions and can be used with an unlimited number of drones.
@dlagrost
11 ай бұрын
Florin The Best
@ronronronron71
10 ай бұрын
I have a question…..I want to buy the fcc mode app ( IOS) for my Mavic Air 1….. Can I use this app for the next few years or is there a limited time? Thanks😢
@dronetweaks1429
10 ай бұрын
Hi, The license is valid for one year, it includes free updates as DJI releases new versions and can be used with an unlimited number of drones.
@ronronronron71
10 ай бұрын
@@dronetweaks1429 ok thank you very much
@inveimer2015
4 ай бұрын
Anything that works for the Rc N1 too ?
@dronetweaks1429
4 ай бұрын
Of course, all our apps also work with the normal controllers
@ddukrouge
10 ай бұрын
mini3 pro + rc with z flip4 Android13 doesn't work... help me. app ver 1.11.4 cont ver. 1.03.0700 model 1.00.0700 testing now at home, so gps not working. I don't know if it can't be done because of this or if it can't be done regardless.
@dronetweaks1429
10 ай бұрын
Hi, allowing the drone first to acquire GPS is mandatory, it is part of the instructions. It will not work without doing this. I would appreciate you removing this comment after convincing yourself that it works after the home point is updated.
@ddukrouge
10 ай бұрын
@dronetweaks1429 OK I'm gonna test tomorrow thx
@febymurdiansyah2644
5 күн бұрын
apakah ini permanen ? apakah harus selalu dilakukan saat ingin membuat fcc
@dronetweaks1429
4 күн бұрын
For the smart controllers, the short 15 seconds procedure must be done before each flight.
@saltire546
11 ай бұрын
I just tried this and on my rc pro i dont get the quick transfer mode coming up on the screen so not working, I had to uninstall my original dji fly app before i could install the fcc app and now i have to uninstall the fcc app before the genuine fly app will re install on my phone .WHAT A MESS !!!..My firmware for my controller is (03.02.0500) which is the latest for the controller and the aircraft firmware is 01.00.1200 Mavic 3 .So if you own a Mavic 3 with an RC Pro controller then you might be better going to the pub and spending the money on a few beers 🍺🍺🍺🍺🍺.
@DroneTweaksSupport
11 ай бұрын
having a functioning quick transfer is a pre-requisite of this method. If you cannot get your phone and drone connected via quick transfer, then this will be a problem.
@saltire546
11 ай бұрын
Works 100% with official DJI App it's the FCC app that's the issue.
@bigkells135
11 ай бұрын
I have mini 3 (non pro) but cant get the fly app and my smart RC tk connect at the same time, any workarounds for this?
@dronetweaks1429
11 ай бұрын
At the moment no, Mini 3 (non-pro) is not supported.
@kalabakacity
11 ай бұрын
@@dronetweaks1429 we are waiting!
@alminaepicoco2786
Ай бұрын
E cambiato qualcosa?
@yerkan54
10 ай бұрын
Merhaba! Dji mini 3 pro kullanicisiyim. Dji güncellemelerinde sikinti oluyor mu acaba.
@dronetweaks1429
10 ай бұрын
At the moment all firmware versions are supported if that's what you mean
@sakissouliotis
10 ай бұрын
Hey Florin!Do i need Bluetooth open for the connection between phone and controller?
@dronetweaks1429
10 ай бұрын
Hi, yes, the phone finds the drone first via BT and only then connects to it via Wifi
@assistedg2710
11 ай бұрын
Cannot get it to work on Mini 3 (not pro). Wonder if it’s bc Mini 3 doesn’t automatically switch to Quick Transfer (need button press 3 times on drone to activate)
@DroneTweaksSupport
11 ай бұрын
looks like Mini 3 (non-pro) doesn't support simultaneous connections to both RC and phone, so this will be a problem for this particular drone... :(
@bigkells135
11 ай бұрын
That answers my query, be nice to get a work around for this ;(
@hugoserv
2 ай бұрын
@@DroneTweaksSupport any news on this matter? i too am stuck at this
@dronetweaks1429
2 ай бұрын
@@hugoserv Hi, Mini 3 won't be able to be used like this with the RC until we find a way to get the entire app installed on the RC...
@hugoserv
2 ай бұрын
@@dronetweaks1429 it Will have to bé a 32bit APP.... Because de RC uses 32bitapp.... Dji always hás something on the ir sleeves
@larasLTU
9 ай бұрын
Do you have any update if it works on Android 14?
@dronetweaks1429
9 ай бұрын
still working on it
@greenfree1525
6 ай бұрын
Do I have to log in to the app on my phone?
@dronetweaks1429
6 ай бұрын
Not sure I understand what you mean. You have to login with the drone-tweaks credentials we send if that's the question.
@KamiL1Bojar
11 ай бұрын
I must repeat this after turn off drone or controller ?
@dronetweaks1429
11 ай бұрын
yes
@dronetweaks1429
11 ай бұрын
Correct
@droniecze1873
11 ай бұрын
In my case was not working on latest Android 14 on Samsung S23 Ultra and also not on Android 10 tablet. All communication with support was ok and very quick responding and all money refund 👍👍
@saltire546
11 ай бұрын
At least you got a refund.I tried with the DJI official app and the quick transfer comes on the screen so it's the FFC app which is the problem, might be corrupted or it just doesn't work with latest firmware.Guess I'll need to spend more money 😡 when Drone hacks get round to upgrading to the latest firmware.
@lotusbluetchen
11 ай бұрын
Does somebody try the app on S23/Android14 and can confirm it works?
@DroneTweaksSupport
11 ай бұрын
@@lotusbluetchen I am currently working on Android 14, it's my top priority.
@droniecze1873
11 ай бұрын
@@lotusbluetchen As mentioned above it's not working on S23 Ultra UI 6.0 Android 14 and info from developers and confirmed below that it's not working yet. Unfortunately it wasn't working also for me on old Android 10 tablet :(
@wclu-f3y
11 ай бұрын
Mavic 3 Pro V01.01.0300 FCC OK???
@DroneTweaksSupport
11 ай бұрын
Yes, all fw versions are ok
@RSI24
11 ай бұрын
What is FCC mode
@DroneTweaksSupport
11 ай бұрын
DJI drones operate under two major sets of regulations: FCC (for US, Canada and a few other places) CE (for Europe and most other places). Because CE regulations are much stricter, the drone needs to turn its radios way down, from an FCC allowed noise of 26dB on 5.8Ghz all the way down to 14dB for CE, which is a very big difference given the logarithmic nature of the dB scale. For Ocusync 2.0 drones (Air 2, Mini 2, Mavic 2) for example, this drops the maximum range from 10km to 6km and offers much less stability at close distances when going behind obstacles like trees or houses or when flying in area with high interference. The 5.8Ghz band (mostly used in urban environments) is even more limited than the difference in maximum range (obtained in 2.4Ghz) would suggest. The FCC mod allows the drone to bypass these restrictions and turn its radios to full power. Furthermore, the FCC mode enables frequencies that are disabled in certain countries (e.g. 5.8Ghz is re-enabled in Russia and Israel). If you are already flying in an FCC country (e.g. U.S. / Canada), this mod won't do anything for you as your drone is already transmitting at full power. The only reason to get it would be if you're planning to travel abroad.
@redgamestream
7 ай бұрын
Does it change the GPS?
@dronetweaks1429
7 ай бұрын
No, everything works just fine
@redgamestream
7 ай бұрын
@dronetweaks1429 Nice, just one more question.. actually 2. First Does it work on modern phones like s23 ultra? Second if a firmware update comes for a drone does the app also recive an update?
@dronetweaks1429
7 ай бұрын
@@redgamestream 1. All phones are supported but there is currently an issue with Android 14 on most phones (S23 is among them) 2. The FCC app receives updates when the official app receives updates, not when there are firmware updates.
@redgamestream
7 ай бұрын
@@dronetweaks1429 Thank you!
@arekbydgoszcz3421
6 ай бұрын
When FCC working with S23 ultra?
@McAND
9 ай бұрын
Nothing about ID remote ??
@dronetweaks1429
9 ай бұрын
what do you mean?
@McAND
9 ай бұрын
I 'm going buy It, buy there Is the new firmware, works yet ? For id remote or aeroscope I Mean It It Is possibile remove It sometimes..
@dronetweaks1429
9 ай бұрын
@@McAND All current firmware versions are supported. We can't help with the aeroscope at the moment.
@tommasosabatini9310
5 ай бұрын
it says "drone allready connected to mobile device"
@dronetweaks1429
5 ай бұрын
You're most likely using the incorrect app. But we have support on email and chat website, please use them. We can't discuss account issues on KZitem.
@matandavid7460
8 ай бұрын
Where can i download the app?
@dronetweaks1429
8 ай бұрын
www.drone-tweaks.com
@assistedg2710
11 ай бұрын
And this works regardless of the firmware version on both controller and drone?
@dronetweaks1429
11 ай бұрын
it works with all the latest firmware versions as of today, november 3rd 2023. I cannot speak for what the future will bring.
@assistedg2710
11 ай бұрын
Impressive 😊😊😊
@Gaffarunal_55
5 ай бұрын
RC Versiyon 01.03.1400 uyarmı
@dronetweaks1429
5 ай бұрын
Hi, all firmware versions are supported at the moment.
@갯방구
6 ай бұрын
s22 ultra, android 14, oneui 6.0 app crash... help me😢
@dronetweaks1429
6 ай бұрын
Hi, Android 14 is not currently supported on most models, we're working on it.
@갯방구
6 ай бұрын
@@dronetweaks1429 try to another phone. and success!! Do I have to launch the app every time fly?
@Alpago45
11 ай бұрын
does it work s23 ultra one ui 6.0 Android 14 ?
@DroneTweaksSupport
11 ай бұрын
Android 14 not supported just yet, we're working on it
@patrickjandl2593
9 ай бұрын
Does it also tweak the flight height limit?
@dronetweaks1429
9 ай бұрын
The 120m limit is removed only when using the drone with the standard controller, not with the smart controllers.
@Jimbo-in-Thailand
10 ай бұрын
@Drone Tweaks - 👍👍 Thanks for these tweaks! OK this may be a stupid question but I'm curious. Is the FCC/CE power difference only in the controller or also in the drone? Edit: I plan to buy the Mini 4 Pro with the standard RC-N2 controller. Is there any difference installing/using this tweak with RC-N2? Thanks! Regards from Thailand... Land of crappy CE drone range!
@dronetweaks1429
10 ай бұрын
Hi, both drone and controller get boosted, of course :) For the standard controller (RC-N2), you just install the modded app instead of the official app and use it to fly as normal, nothing special to do.
@Jimbo-in-Thailand
10 ай бұрын
@@dronetweaks1429 Fantastic! I'll snag your app as soon as I bite the bullet on the Mini 4 Pro! 😁😁😁
@giuseppe7150
9 ай бұрын
Funziona con Air2S + RC (1) e Android?
@dronetweaks1429
9 ай бұрын
Air 2S only supported with standard RC-N1 controller
@Impplay
11 ай бұрын
Please make it work on Samsung S23 adroid14 and publish it :)
@DroneTweaksSupport
11 ай бұрын
Android 14 is our current top priority 👍
@Impplay
11 ай бұрын
@@DroneTweaksSupport do your best guys Im waiting :)
@sasunkhudoyan3866
2 ай бұрын
Helooo plees my samsung s10lite
@dronetweaks1429
2 ай бұрын
Hi, if you are having a problem with your S10, please reach out to our support staff on the website.
@hakanergul
9 ай бұрын
hi,Will the warranty be void?.... I live in Istanbul Turkey
@dronetweaks1429
9 ай бұрын
Hi, there were never any issues with warranty with the drone-tweaks mods.
@hakanergul
9 ай бұрын
Can we update rc2 after purchasing? Or will we not be able to do it at all? @@dronetweaks1429
@MarcyBenzy
8 ай бұрын
I have the FCC app it works but in Thailand some places ( Pattaya - Jomtien - Koh Larn ) i tried it does not work? Strange??? Anybody have an Idea.....
@superowl91
11 ай бұрын
do you need to leave the dronetweaks app running all the time while using the RC controller
@DroneTweaksSupport
11 ай бұрын
no, after you tap `Exit Quick Transfer mode` you can close the app and the phone.
@dronetweaks1429
11 ай бұрын
No, you can turn off the phone
@leonardodisse9081
2 ай бұрын
is the height unlocked??(120mt)
@dronetweaks1429
2 ай бұрын
Hi, the 120m limit is removed only when using the standard controller (without screen). For the smart controllers, only FCC is enabled.
@leonardodisse9081
2 ай бұрын
Thanks Ps I'm also waiting for your update for Android 14.......because your app doesn't start
@boby
2 ай бұрын
@@dronetweaks1429 If using android phone, will this remove the 120m?
@dronetweaks1429
2 ай бұрын
@@boby The 120m limit is removed with both iOS and Android but only if using the standard controller (without screen).
@gabord.9206
9 ай бұрын
Samsung s23 ultra Closes when the app starts This is a waste of money Unfortunately this one doesn't work!
@dronetweaks1429
9 ай бұрын
Android 14 is not yet supported on certain phones, such as the S23 Ultra, we are currently working on adding this compatibility. All other versions are fine.
@dooronron69
2 ай бұрын
Shame you don't have a 7 day trial as if it doesn't work it's at least €25 down the drain... Plus Shame it is a subscription and not a lifetime app, @@dronetweaks1429
@lotusbluetchen
11 ай бұрын
Does the app leave any traces after it is switched off?
@DroneTweaksSupport
11 ай бұрын
Do you mean after the flight? Not sure what you mean.
@lotusbluetchen
11 ай бұрын
I meant: If you restart the controller and it is back in CE mode: Are there any indications in the controller that FCC was activated or is it back in the "original" state?@@DroneTweaksSupport
@dronetweaks1429
11 ай бұрын
@@lotusbluetchen no, there is nothing else left in the controller. The one thing that I have no way of knowing for sure is if the FCC information remains in the flights logs in your DJI account.
@Gaffarunal_55
Ай бұрын
atti mode varmı
@dronetweaks1429
Ай бұрын
I don't undestand what your question is
@KrimSKR
11 ай бұрын
Hello! Please arrange payment on your website with bank cards from Russia!
@HEMI345S
7 ай бұрын
Are ya on the frontline in Donetsk ???
@Alexis23587
7 ай бұрын
Its aviable for dji RC N1?
@dronetweaks1429
7 ай бұрын
Yes, of course :)
@Alexis23587
7 ай бұрын
@@dronetweaks1429 ok good👍🏻👍🏻I just bought it I hope it works 😂😂
Пікірлер: 208