YOU HAVE THE ABILITY TO TAKE NATURE'S BEAUTY AND ENHANCE IT!!! THANK YOU ONCE AGAIN FOR SHARING YOUR TIME AND TALENT WITH US!!! TAKE CARE AL!!!
@AlFurtado
4 жыл бұрын
Thank you very much I am glad you liked it
@ridterranytofollowtruthpea8324
4 жыл бұрын
@@AlFurtado,. YOU'RE MORE THAN WELCOME!!!
@royboggs3849
2 жыл бұрын
Love ur “use what you got” (frugal) attitude!!! 👏👏👏👌👌👍👍
@AlFurtado
2 жыл бұрын
Thank you, I'm glad you liked this video. Merry Christmas my friend.
@jeanblythe1595
6 жыл бұрын
This piece of sycamore, with all those colors and tones--gorgeous what you brought out of it, because it was hiding in there. One of my favorite pieces, a good lesson in turning and vision. :)
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it as much as you did. Just shows it is in there you just need to peel it away.
@shawnafernandez5764
6 жыл бұрын
From a sow's ear to a silk purse. It's BEAUTIFUL!
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it.
@shannabauer
2 жыл бұрын
I absolutely love your style. Very easy going, love the tool segment where you said to use what you have. You don't hear that from many turners. Thank you for this stunning sycamore turn. You have a new subscriber.
@AlFurtado
Жыл бұрын
Thank you be sure to watch new videos as I just got back to turning in a catamaran.
@ThePapa1947
6 жыл бұрын
Al it is amazing how you start out with piece of wood that most people would not even use for firewood and turn it into a thing of beauty. Well done again. Also how you have taken your lathe and converted into a great tool that lets you do your turnings. Probably 40 years ago I had an old Monkey Wards lathe that I made wood riser blocks so I could turn the pedestal part of a round oak table I made. Your blocks brought back some good memories. I didn't leave mine on though but kept them just in case. I have watched many of your older videos and like them all. Your tool making and tool modifying skills are impressive. I enjoy making and modifying tools myself almost as much as I do wood turning. Looking forward to your next video. Gary
@AlFurtado
6 жыл бұрын
Thank you my friend I am glad you enjoy it. Trust me you would have found something amazing in this piece of wood if you had it.
@bluelineturnings5055
6 жыл бұрын
Another great looking vase you do amazing wood Al and your videos are full of knowledge keep it up and safe turnings
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it.
@glenmckelvey5952
6 жыл бұрын
Hi Al . I really like your ability to see the potential in a piece of wood. Beautiful take care.
@AlFurtado
6 жыл бұрын
Thank you my friend. I was hoping to keeps the wings but they just seemed off once I passed up a certain point. As I have said many times you can't put it back LOL
@SiamWoodShop
5 жыл бұрын
Mice job Al, lovely grain and shape, thanks for the inspiration.
@AlFurtado
5 жыл бұрын
Thank you very much
@williampeak8851
Жыл бұрын
Very nice and informative, thank you for sharing this 👍❤️
@ernestboatwright7172
6 жыл бұрын
Sounds like raining cats and dogs. Send so to SC. A great looking turning.
@MikeWaldt
6 жыл бұрын
Another "Rebel" work of art, from a piece of wood that most of us would never dare to tackle. Great video Al. Take care my friend. Mike
@DrDoom42
6 жыл бұрын
Good job Al. Always enjoy watching your videos. Keep em coming.
@AlFurtado
6 жыл бұрын
Thank you I am glad you enjoy it.
@DrDoom42
2 жыл бұрын
@@AlFurtado that's my plusher
@josephwhitlock2445
4 жыл бұрын
Al you did a wonderful turning, very beautiful, I love the finish. So nice to see you turn it from start to finish. Thank you
@TurningWorks
6 жыл бұрын
Beautiful piece Al! I’ve just had some spare time so I’ve watched a few videos I missed . Sorry I haven’t commented on them all. 👍🍺
@tomsaltus3602
5 жыл бұрын
I for one appreciate that u show that it can be done with out the best tools on the market. where most channels have or promote high end tools.anyhow great piece as always. I learn alot from ur videos thank you for such good explanations and direction.
@AlFurtado
5 жыл бұрын
Thank you my friend Happy Thanksgiving
@patbaines1173
6 жыл бұрын
I think this is beautiful and I love the way you explain the the way you make your pieces and why.
@AlFurtado
6 жыл бұрын
Thank you my friend. Sorry it took so long to respond. I know you must be super excited about your new lathe. I told you it was a matter of time. Now you be careful and don't be a Rebel even though I know you want to be one LOLHappy turning and have fun
@patbaines1173
6 жыл бұрын
Yes you did tell me I was going to get one. And I am glad you are back because I was worried you might not be well after talking about the heat and your past health problem. And yes, I do worry about people I don't know personally, that's just me. Take care and God Bless. Stay cool.
@roadrunner4404
6 жыл бұрын
Another fine piece. Thank you for the encouragement of using what you can afford in tooling. Our ancestors made works of art with worse steel tooling than our cheaper sets. I make my own scrapers but I have access to great steels from our scrap bin at work.
@AlFurtado
6 жыл бұрын
Thank you my friend. I think I need to raid your steel pile LOL. I agree. I envy those that use primitive tools.
@leewardleworth3225
5 жыл бұрын
I enjoy your work. Thank you.
@Bramsshed1913
6 жыл бұрын
Brilliant video mate and a real beauty of a vessel! Love those colours and those patterns that comes through . Good advice as usual about tools, make the most of what we have is only too true ! Take care my friend Bram
@AlFurtado
6 жыл бұрын
Thank you my friend I am glad you enjoy it. I know by now you must be getting tired of watching me LOL. This piece shocked me with the colors as the first piece I turned from this wood was very blend. Thank goodness for mother nature
@Bramsshed1913
6 жыл бұрын
One of my best bowls was out of sycamore! I have some drying out in the shed and all goes well I can cut another tree in the winter. Tired of watching you mate ? NO, never my friend !! Catch you later buddy !! Bram
@edwardsimmons3721
3 жыл бұрын
Great looking project.
@vincentgolden5352
6 жыл бұрын
Wow Al that grain is amazing
@AlFurtado
6 жыл бұрын
Thank you my friend I am glad you enjoy it. I was a bit surprised myself with it.
@mikecox1129
6 жыл бұрын
Stunning piece Al, the colours of the finish are spectacular, I thought early on in the turn that it was a classical urn coming through. As a commercial piece I would say its a few thousand dollars for you. The wife is also in love with the piece.
@Ronalcock1
6 жыл бұрын
very nice Al keep up your video's I really enjoy watching you make beautiful things, you inspire me every day.
@barbaramccarley5803
5 жыл бұрын
Its beautiful. It reminds me of an old fashioned oil lamp
@AlFurtado
5 жыл бұрын
Thank you very much for watching I can see where you see that. Take care
@ShevillMathers
4 жыл бұрын
Incredible amount of work but a very interesting journey with a great result. It has a very ancient look to it, some trophy a gladiator might have received. Well done my Rebel friend. 👍😁🇦🇺🔭
@sharonyoung8251
3 жыл бұрын
Background noise is nice. Love the sound of rain on a tin roof
@AlFurtado
2 жыл бұрын
Glad you like it
@donovanbailey4398
6 жыл бұрын
I am absolutely sure that all of us "20,000 subscribers" will enjoy every minute of your project. Superb work and a superb piece. It made me laugh when you said that you were going to do an "easy turn"...and then put this gnarly looking stump on the lathe.
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it. now only if I can get all of the 20,000 to comment LOL
@kevinburrows1705
6 жыл бұрын
Al, what can say you are master. Thank you for a great tutorial buddy. Keep safe 👍👍👍👍👍👍👍👍👍👍
@AlFurtado
6 жыл бұрын
Thank you I appreciate the confidence in me.
@jameskayeartist
3 жыл бұрын
amazing work Al!!
@shauneadson4217
5 жыл бұрын
Great work Al, gorgeous colours in that wood, thank you. 👍 👍
@AlFurtado
5 жыл бұрын
Thank you my friend I am glad to hear that you liked it. Thank you for watching and commenting. I appreciate it. Take care
@frankkirby5763
6 жыл бұрын
You make it look so easy, but it is not easy. Thank you so much for the sycamore turning. I am going to try that wood soon.
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend Sycamore isn't an easy wood to turn. Turn green it will cut much nicer
@jimgreen4750
5 жыл бұрын
As usual I'm impressed
@kathylecluyse7820
6 жыл бұрын
Lovely piece of work, very chic! Don't know if that's what you wish to hear, but chic it is! The shape, the rich colours, the delicate detailing - everything screams elegance. Glad to see you working with such joy, thanks for sharing it with us all. Take care, my friend
@AlFurtado
6 жыл бұрын
Thank you my friend I am glad you enjoy it. Chic it is LOL
@pablogazmuri5656
6 жыл бұрын
Beautiful work. Hard to imagine the end result were you started from. Very inspirational. Thank you.
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it. This one kept showing me different approaches LOL
@ernestboatwright7172
6 жыл бұрын
Wish I could do as great a turning. Will get there one day. If I don't I still have fun doing it!
@AlFurtado
6 жыл бұрын
We all get where we want to be with our skills in time. Practice practice.
@woodturningwithDave
6 жыл бұрын
Good job Al. enjoy watching your videos.keep up the good work :)
@AlFurtado
6 жыл бұрын
Thank you my friend I am glad you enjoy it.
@mrprimenumbers6448
6 жыл бұрын
That is an absolutely beautiful piece. I like it a lot. It looks like an ancient artifact with the chipped rim an the indention on the upper top. It really is a very beautiful piece.
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it. Love your description.
@AllenORourke1954
6 жыл бұрын
Stunning job Al...👍👍👍👍👍🇬🇧🇺🇸...
@AlFurtado
6 жыл бұрын
Thank you my friend I am glad you enjoy it.
@woodturnerky8556
6 жыл бұрын
Al the way you can take any piece of wood and find something in it, never ceases to amaze me! I recently tried more of an art turning and halfway through struggling with the design I was thinking to myself, "this must be what al furtado goes through" and then thought, "too bad I couldn't video call al furtado to ask what I should do next" LOL Another great piece al, keep them coming! Kyler
@AlFurtado
6 жыл бұрын
LOL Thank you my friend I am glad you enjoy it. So how did you manage? you should have called upon me. I am sure the end results on your art piece ended up just fine. It's a matter of stopping and look at it from different angles.
@woodturnerky8556
6 жыл бұрын
Al Furtado Honestly Al it turned out pretty darn good and I'm really glad I pushed myself. You have been an inspiration to me and I have watched you for years (on my old account, and now on this one dedicated to turning). I have always admired and have a lot of respect for your work. You have quite the eye to find the amazing shapes you do! Thanks for the advice of stopping and looking from different angles. I should stop the lathe more to look, and I will definitely heed your advice. Safe and Happy turning to you! Kyler
@donovanbailey4398
6 жыл бұрын
I've enjoyed your work too, WK. I left a question on your last turning in regard to your shine juice formula...whenever you get around to it.
@woodturnerky8556
6 жыл бұрын
Donovan Bailey Thank you Donovan, much appreciated! Were you referring to Al or myself in regards to leaving a question? I couldn't find anything in my notifications so thought I would ask and make sure.
@donovanbailey4398
6 жыл бұрын
WK: I left a question on your "Chokecherry Bowl" video in regard to your shine juice. Probably be better to continue the dialogue on your video in case someone else might be interested in your response. Thanks.
@bbelen61
6 жыл бұрын
Great piece Al! Turned out beautifully. Cheers from from south shores of Lake Superior.
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it.
@sharonyoung8251
3 жыл бұрын
I love this bowl. It’s beautiful. Also love how you let the wood make your decisions on design, and are afraid to make design changes midstream.
@AlFurtado
2 жыл бұрын
Thank you very much!
@glennmoreland6457
6 жыл бұрын
Hi again Mr. Furtado I think with those inclusions it looks like one of those pots from ancient Greece that you see on the seabed on TV programs...i think its another beautiful piece you've done there....again... I like the presentation of these utube films your doing... Its right that you should go for the best that you can afford in terms of tooling...but like you point out there's plenty out there to get you started.... It seems a long time since you made the riser blocks for that lathe.... The time it took to make & fit them was clearly a good investment...😉
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it. Nice description of it Thanks again
@alanmullock381
6 жыл бұрын
Beautiful piece Al ,and a joy to watch👍👍👍👍👍👍👍
@AlFurtado
6 жыл бұрын
Thank you my friend I am glad you enjoy it.
@dodgybodger3124
6 жыл бұрын
Al you love what you do! Your craftsmanship is heart felt by many of followers. Stay positive pal, n keep up the good work. Your an inspiration to many. Many thanks from the uk. That's a lot of many's lol.
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it.
@Dave49021
6 жыл бұрын
Another amazing piece Al, enjoy every one of your videos.
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it.
@donaldadams5342
3 жыл бұрын
It took me 3 viewings of this video to realise that I have never written a comment. This is a beautiful piece that you produced with your great skill & determination. Okay, Sycamore is almost always a beautiful piece of wood to work with but you have really dug deep & produced an amazing piece of greatly enhanced beauty thanks to your skill. An amazing piece my friend, Don from South Aust.
@AlFurtado
3 жыл бұрын
Thanks again!
@williamevans4955
5 жыл бұрын
Al we love you tell us about your thought process, keep it up buddy.
@AlFurtado
5 жыл бұрын
I do in most but once in a while I guess I lack on informing as much as I should.
@adamquincey4371
6 жыл бұрын
Excellent, beautiful piece my friend. I know the wood isn’t spalted but it has some beautiful character... Cheers...
@AlFurtado
6 жыл бұрын
Thanks my friend. I did expect some spalting on this wood but was surprised by the colors that it developed.. No disappointment in this wood but cuts were rough No curls there LOL
@donaldtrabeauxjr5323
6 жыл бұрын
Another masterpiece by the master of wood turning, Mr. Al that’s why I watch the videos so I can learn from you thanks for sharing my friend god bless
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it.
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it.
@jimbrock8928
2 жыл бұрын
Like it great turning
@AlFurtado
Жыл бұрын
Thank you be sure to watch new videos as I just got back to turning in a catamaran.
@ThatSocratesguy
4 жыл бұрын
Wow that looks like a fire goblet
@AlFurtado
4 жыл бұрын
Thank you very much Take care be safe my friend.
@PhilAndersonShadyAcresWoodshop
6 жыл бұрын
Nice job, Al. I really like the design!
@AlFurtado
6 жыл бұрын
Thank you my friend. Glad to see you watching and commenting. Take care
@edwinleach4013
5 жыл бұрын
Another Masterpiece. Keep up the great work!
@cedricmcfarlane8601
5 жыл бұрын
You are the man, love it
@AlFurtado
5 жыл бұрын
Thank you very much for watching and commenting my friend..
@davidfairman5461
6 жыл бұрын
You are simply amazing Mr Al.
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend not sure amazing describes me but thank you
@robertgolden1080
5 жыл бұрын
Great project! Al I really like the way you don’t totally stick to your original ideas. You let the piece define what it should be in the end. Keep up the great work
@AlFurtado
5 жыл бұрын
Thank you sometimes it works and others I am sorry I didn't LOL
@Ronalcock1
5 жыл бұрын
BEAUTIFUL. Ron
@AlFurtado
5 жыл бұрын
Thank you my friend
@thomasckuzia7129
6 жыл бұрын
Hi Al, I don't think "easy piece" is in your vocabulary! LOL Beautiful piece again! I always love watching you create! Thanks for the video,,, Tom
@AlFurtado
6 жыл бұрын
LOL sure it is but I did say I wasn't going the easy rout Thank you for watching and commenting my friend I am glad you enjoy it.
@raffaellavitiello1762
6 жыл бұрын
l love it so much , everything about this piece, l am glad you did not change anything and left as it end up to be, so nice to see you work and enjoyed your happiness, take care
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it.
@pandorabox2121
5 жыл бұрын
Hey Al, thank you so much for that, I can not believe that’s the same piece, it really has lightened up. Well to tell you the truth I prefer light/ white wood over yellow and brown (except for black and purple and reds I love them) and I really like the way it has faded back to its lighter colour but that’s just my opinion. Again thank you for the link I would never had found it on my own. Take care. 📐💜📐
@AlFurtado
5 жыл бұрын
I also liked it lighter as shown on last pictures
@plumber12131
6 жыл бұрын
Nice job !
@janegilbert9851
6 жыл бұрын
Another great design, I wish you were in the Uk so we could invite you to our club to do a demo.
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it. now only if I can get my American friends to offer the same LOL...... Well actually I have been offered but can't do it with my work schedule but thank you for such a wonderful compliment and what an honor it would be.
@carolriley569
6 жыл бұрын
This piece gave you quite the work-out...I love it...the wood is so spectacular!
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it. it sure did. It kept changing it's mind on what it wanted to be LOL
@trueitbycjtruitt9546
5 жыл бұрын
I really love it I think you did a awesome job with that piece
@jacobworkman6455
5 жыл бұрын
That’s beautiful
@scott27288
5 жыл бұрын
I love this piece Al The grain pattern is outstanding. I have to admit, I was one of those who at the beginning thought you may be "butchering" the foot but as usual, you pulled it off expertly. See you in the next one.
@AlFurtado
5 жыл бұрын
Thank you very much my friend, Merry Christmas
@AliIskenderov
6 жыл бұрын
Очень очень красивая форма как и рисунок дерева .Браво Маэстро
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it. I hope you understand some of what I say.
@jayyaj7050
6 жыл бұрын
Beautiful piece, Al! I've never had good luck with sycamore. Of course the only sycamore I have access to is rotten junk lol. Still healing from the last piece of sycamore I tried to turn that came out of the chuck and took a chunk out of my hand with it.
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I was a bit disappointed on how it cut but ohh well got to keep it going LOL
@harveyweeks2339
6 жыл бұрын
A great turning yet again And the vision you have to see the final piece is always great ,then you use Yorkshire grit do you apply sanding sealer first ? I use it and find it works better thanks again till the next time
@AlFurtado
6 жыл бұрын
Thank you very much. Comments/compliments like this are reason we do what we do.......... Thank you
@patbaines1173
6 жыл бұрын
Absolutly beautiful, love it.
@TheMessyStudio
6 жыл бұрын
Another beauty indeed, my friend! Billy
@AlFurtado
6 жыл бұрын
Thank you very much. Glad you liked it.
@juliebaker6969
6 жыл бұрын
The indents in the sides and the rich colors in the figure turned what would otherwise have been a plain vanilla shape into something striking.
@raffaellavitiello1762
6 жыл бұрын
you said exactly what l was trying to say but could not find the words, thankyou well said
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you liked it as much as you did.
@VICKING589
6 жыл бұрын
Lovely work Al...as usual!
@AlFurtado
6 жыл бұрын
Thank you my friend I am glad you enjoy it.
@wagWAGart
6 жыл бұрын
awesome piece al as usual holling looks quicker take care and safe turning
@AlFurtado
6 жыл бұрын
Thank you my friend the cutter is a pleasure to work with still refining witch angle works the best for me
@garthkeck2003
6 жыл бұрын
Beautiful job, Al.
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it.
@StudioJLT
6 жыл бұрын
Great video. Tons of great insight here.
@AlFurtado
6 жыл бұрын
Thank you my friend I am glad you enjoy it.
@sanmicol
5 жыл бұрын
Fantastic but how do you visualise what the product will turn out to be
@KE4YAL
6 жыл бұрын
Al Sycamore isn’t ideal but you make it look really awesome Thanks for sharing
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I found it to be a bit hard to cut. no shavings just dust
@srdavis37
6 жыл бұрын
Ha! They don't know you very well if they tell you you can't! I say Al could turn a brick and make a masterpiece.
@AlFurtado
6 жыл бұрын
LOL I don't know about that but it might be worth a try huh? LOL
@glencrandall8334
5 жыл бұрын
I think this piece looks Greek. I think someone else thought so too. Whatever the classification it is a beautiful piece. Thanks for sharing with us.
@alexleibowitz4361
6 жыл бұрын
I like, but could you state what chemicals your using and always mention the rpm used thanks...love your shows!
@AlFurtado
6 жыл бұрын
Thank you my friend I am glad you enjoy it. I hate to repeat same thing over and over. I do understand that at times someone comes over and sees my channel for the first time and therefore get pieces of missing information but I assure you I have done several videos on them.. I pretty much use same tools and finishes. Yorkshire grit and OB shine juice and any gluing is CA thin glue and saw dust.
@virginiacopeland108
5 жыл бұрын
Thumbs up!!! Clark
@jptazzairbrushingjprice7250
3 жыл бұрын
What WOULD YOU SUGGEST FOR A 5/8" BOWL GOUGE.
@sharonyoung8251
3 жыл бұрын
Beautiful
@AlFurtado
2 жыл бұрын
Thank you! Cheers!
@martingay8585
5 жыл бұрын
Just wondering about your steady rest ,is it home made?Nice work Al.Thanks
@AlFurtado
5 жыл бұрын
Thanks for watching and questioning. yes I made it many videos up on home made steady rests out there. I have it on how I made the cam lock
@Bunefoo401
6 жыл бұрын
Lovely ... it looks almost like marble.
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it.
@freedomsailer
5 жыл бұрын
Excellent .....
@AlFurtado
5 жыл бұрын
Thank you
@danc7023
6 жыл бұрын
good job as always
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it.
@Lee-qp6gf
6 жыл бұрын
What I take away from you every time is the analysis of the turn. Thanks, Al. Lee
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend. As long as you get something out of it than all is good.
@m.fuegoa6603
6 жыл бұрын
Guau...!!! 😯😮👌👍
@AlFurtado
6 жыл бұрын
Thank you for watching . Take care
@m.fuegoa6603
6 жыл бұрын
Al Furtado Thanks and kisses from Spain... Europe...!!!! 😌😋
@tomasarguinzoni9022
6 жыл бұрын
Very nice job sir 👍🏼🍻
@AlFurtado
6 жыл бұрын
Thank you my friend I am glad you enjoy it.
@jamescolbert8094
5 жыл бұрын
Al could you talk a little bit about carbide tipped hollowing tools. Do you use full size or midi?
@AlFurtado
5 жыл бұрын
Done some videos on these topics already but I don't use many carbide tools.
@brucejones4538
5 жыл бұрын
The last time I saw a turning go through that many changes it was flying off my lathe in twelve pieces.
@AlFurtado
5 жыл бұрын
LOL well watch a few more and you will see many go through the same drama LOL
@thomasarussellsr
6 жыл бұрын
Sorry the wings didn't work out for you on this one, but you still came out with a real nice pot/urn. Great job, my friend.
@AlFurtado
6 жыл бұрын
Thank you I felt at one time that it was ruined but was still pleased with the results.
@bodiejay2859
6 жыл бұрын
Great turning Al, it looks amazing. One question what happen to the textures you put in the side of it.
@bryanwest1990
5 жыл бұрын
Mr Al i would be tickeled to death to make a piece like that !!!!
@nickdispensa9762
5 жыл бұрын
good job
@paulblackman3936
6 жыл бұрын
I think I would have turned it from the side to use that amazing grain in the bowl but your choice is remeniscent of your last piece? Hmm exorcising your demons has to be done! Take care my friend.
@AlFurtado
6 жыл бұрын
Thank you for watching and commenting my friend I am glad you enjoy it. LOL good analogy LOL
@bugmantim
6 жыл бұрын
Which tool is easiest to use? Not the best but the easiest? Does the long hand,e on the Hurricane make it easier to maneuver than the Harbor Freight?
@AlFurtado
6 жыл бұрын
Believe it or not for outside of bowls and inside shallow ones I like the wide HF modified gouge. but for deeper pieces and tighter entry pieces I find the pointy grind on my hurricane to be the to go tool.
Пікірлер: 228