Once again great video 👍 Very useful info about the software
@TheGibby3340
3 жыл бұрын
Thank you Sir. Greatly appreciated 👍
@temejumbo9794
3 жыл бұрын
Thanks for the information, very educative.
@TheGibby3340
3 жыл бұрын
Thank you Sir. Much appreciated.
@bobcombs7138
3 жыл бұрын
Very informative, and thanks for the tip on the roll mode. Gonna try this with a simple 10 k pot and using the hantek 6022bl. Not sure if it has roll mode though. Thank you for another great vid!
@TheGibby3340
3 жыл бұрын
Thx for watching Bob. 👍
@CHIBA280CRV
3 жыл бұрын
Fantastic, now I can pull out my hanger DS3604 out the top of the closet and put it to some good use..
@TheGibby3340
3 жыл бұрын
I have no idea what a DS3604 is ??? DSO3064....Is that the Model you are referring to? Thx for watching 👍
@stephanevaucelles6378
3 жыл бұрын
thank you for the very interesting video
@TheGibby3340
3 жыл бұрын
Thx Stephane 👍
@pigeonsil240sx
2 жыл бұрын
it makes logical sense why they use two seperate signals since this is what tells pcm your throttle position its a safety feature,if you had only one signal and that had resistance/shorted that could be dangerous if you only had a single signal.im surprised one isnt reversed though meaning as you open throttle one adds voltage and the other goes down in voltage?
@johnkidd4822
2 жыл бұрын
in treating was thinking of buying a scope to check my gsx1400 injectors on a 2002 bike thank .
@pigeonsil240sx
2 жыл бұрын
im getting ready to buy my first pico and only use for diy,would this one be recomended over the $60 hantek?what are tha actual differences?
@johnbickle4654
3 жыл бұрын
Good tutorial thanks .
@TheGibby3340
3 жыл бұрын
Thx John 👍
@theGADGETSplaylist
3 жыл бұрын
I'll soon be building a newly developed 2 channel WiFi oscilloscope. Waiting on parts which is par for the course. I had thought TPS would make a fine DEMO allowing me to be at the accelerator pedal, tablet in hand, scope under hood and no wires! I was going to throw in a math channel for good measure. Then, this video comes out. Great minds think alike, Ian:) Also interesting, roll mode in HANTEK and roll mode in HScope have two different meanings. With the HT1008, from what I see in your video it looks a lot like the AUTOMOTIVE MODULE in HScope that doesn't use pages (not at all) and streams borderless data. I'll discuss it with Martin, it's caught my attention. In other news, after 5 months, we're looking for another cat. Wife is ready.
@TheGibby3340
3 жыл бұрын
Makes a big difference if yer in the right mode. Don’t change your plans on my account, if you don’t mind I certainly don’t. I am happy to have your thoughts on any issue...Plenty black cats in the pound Denis (I have to do my part for them) Superstition (fear and ignorance) quite literally leaves them out in the cold. Of course it’s entirely up to you and your Wife 🤣 Cheers Pal 👍
@theGADGETSplaylist
3 жыл бұрын
@@TheGibby3340 actually our local animal shelter has a waiting list of people wanting cats... We had a jet black cat years ago, so not the superstitious types. I do walk around ladders tho...
@TheGibby3340
3 жыл бұрын
@@theGADGETSplaylist Me too (don’t tell anybody) 🤣 looking forward to yer new build. Should be, and always is...interesting. Snowing big time here at the moment 😳 Cheers Pal 👍
@theGADGETSplaylist
3 жыл бұрын
@@TheGibby3340 as I was reading your snow report, my wife was on phone with her Orangeville friend getting the same report...at the exact same time...lol
@TheGibby3340
3 жыл бұрын
@@theGADGETSplaylist When this nonsense is over and done with...When yer in town visiting your friend, you definitely have to stop in for a coffee/beer. I mean that sincerely...Snows tapered off now..Thankfully. I can hear the blower out on the street 🤣
@ernandejesus1641
4 ай бұрын
Show ❤
@theGADGETSplaylist
3 жыл бұрын
I thought you might be interested my post to the HScope Group, Ian: TheGibby3340 (my buddy Ian) posted a video yesterday using the HT1008 in "ROLL" mode. Not to be confused with HScope's ROLL mode which is HANTEK's SCAN mode. No wonder we struggle at times:) HANTEK's "ROLL" mode is very much like our AUTOMOTIVE MODULE...a steady stream, right to left. I took a close look and its limit is 500ms/div which is inline with HScope's 2Ksa/s limit (1008 in automotive) Can not be stopped, nor saved which is a big drawback. But, I found it interesting that HANTEK even has a borderless stream mode. HANTEK 1008 ver 1.0.30 has come a long way. We will give 'em that...
@TheGibby3340
3 жыл бұрын
Thx Denis appreciate that 👍
@312ark
Жыл бұрын
How did you get the voltage readings to display on the the screen? Thanks.
@TheGibby3340
Жыл бұрын
kzitem.info/news/bejne/rYOs4KZ-hGWThIo
@otisplunk2599
3 жыл бұрын
Roll scope! (I love saying that, it makes me sound like I know what I'm talking about...)
@TheGibby3340
3 жыл бұрын
🤣 👍
@JohnnysSpeedShop
3 жыл бұрын
Nice one Ian.... #rollmode for the win....😁 stay warn buddy.. cheers...J
@TheGibby3340
3 жыл бұрын
Thx Johnny. Snowing like the Devil at the moment. Looks like I will be doing some shovelling this evening 🤣 Cheers Pal 👍
@JohnnysSpeedShop
3 жыл бұрын
@@TheGibby3340 I remember those days....Booooooo
@TheGibby3340
3 жыл бұрын
@@JohnnysSpeedShop Think I’ll move to Florida...Maybe I could be Donald’s neighbour 🤣
@JohnnysSpeedShop
3 жыл бұрын
@@TheGibby3340 lol....
@franklynflowers5557
2 жыл бұрын
Where is the zero line on the hantek
@TheGibby3340
2 жыл бұрын
Where you set the respective channel marker on the Y axis. 👍
@paulgalarza5833
3 жыл бұрын
Where can I get instructions on this scope?
@TheGibby3340
3 жыл бұрын
The Help section of the drop down menu of the software contains the manual. Alternatively go to Hantek website I believe the manual is available for download.
@gilrod2511
3 жыл бұрын
are you using an attenuator?
@TheGibby3340
3 жыл бұрын
No sir not required...It’s only 5 volts. Thx for watching 👍
@gilrod2511
3 жыл бұрын
@@TheGibby3340 I have the Hantek 1008a, what is the voltage input range? i work with transmissions. The shift solenoids have 12 volts supplied, which the ECM grounds to switch on. Will i need an attenuator?
@TheGibby3340
3 жыл бұрын
@@gilrod2511 The help section in the menu of the software contains a user manual including specifications. I use an attenuator any time the voltage is over 20V. Shift solenoids will produce induction spikes that can reach quite high levels as you know. So to safeguard your gear, for that application I would use one. Hantek produce the HT-201 (20:1) cheap insurance.
Пікірлер: 46