I truly appreciate you taking the time to make these videos. Your videos are immensely helpful, I can't thank you enough.
@KnowKnots
5 жыл бұрын
You are most welcome! I'm just glad they are helping people.
@yingyuhung5161
5 жыл бұрын
Thank you so much! GTT was too complex for me,I know how to use it now .
@KnowKnots
5 жыл бұрын
With no directions on how it's used gtt can seem daunting. Glad you found the video helpful!
@vgaloosh
5 жыл бұрын
Thanks! I've been doing everything the hard way! Splitting packs, selecting colors while in the initial pattern screen, etc. So thanks for all the great tips!
@KnowKnots
5 жыл бұрын
I'm a visual learner so sometimes just seeing how something is done can be huge. Especially when there is no documentation. Glad I could help!
@Eldormen
3 жыл бұрын
thank you so much. I am now working on my first band and its super fun.
@KnowKnots
3 жыл бұрын
Have fun! Glad I could help!
@knackfulknitter
4 жыл бұрын
Excellent tutorial for using GTT program! Thank you!
@KnowKnots
4 жыл бұрын
You're welcome!
@neonboy22
4 жыл бұрын
Thanks for the demo. super useful. I think there is a way to shuffle the warps to left or right in the card setup menu. Its the little left and right arrow buttons under the Z/S swap tools.
@KnowKnots
4 жыл бұрын
Thanks! I think you're right, it just means redoing the colors and s/z
@nixhixx
3 жыл бұрын
Huge help, THANK YOU!
@lizzimoa
5 жыл бұрын
Thank you sooo much!! This was ALOT of help!
@KnowKnots
5 жыл бұрын
I'm so glad!
@snazzypazzy
3 жыл бұрын
This was very helpful! Thanks a lot!
@KnowKnots
3 жыл бұрын
Glad it was helpful!
@makemywayman
4 жыл бұрын
Thank you soooo much! It help me a lot ! Excellent vidéo!
@KnowKnots
4 жыл бұрын
You're welcome! Glad it helped!
@imeldaweijers3284
3 жыл бұрын
You can actually add a border later. On the card setup just add the extra cards at the end, then select the card that you want at the beginning and use the arrows to shift them to the correct position.
@KnowKnots
3 жыл бұрын
Yes you can do that, but it may mess up the pattern and if there are a lot of picks, redoing the pattern is a pain. Ask me how I know ;-)
@sjrSpike
5 жыл бұрын
I found out how to add edges and not have to completely re-do the band by hand. You open the cards window, add the extra cards, and click the check mark. All the way you show. Then, you click on the number (at the top) of the new card you want to move, and click on the little arrow-in-a-circle that is below the S/Z section to the left. Click the arrow as many times as it takes to move the new card where you want. And if you go too far, use the opposite arrow to return to where you need it. And if you've got your pattern built, when you decide you don't want the cards on to left, just select them (you can use shift to select multiples, too) and move them to the right. Then, change the card count on the left and click the check mark, and all the extra cards go away.
@KnowKnots
4 жыл бұрын
Thank you! I'll check this out!
@revc9835
3 жыл бұрын
Thanks for explaining this. Were can get this program?
@Marie-AndreeMaltais
Жыл бұрын
I would like to know where I can get this great software? Thank you
@goddessbastet2331
3 жыл бұрын
does the double face program option has the same feature of automatically setting the picks/forwards/backwards on the right side?
@PegTingle
5 жыл бұрын
Very helpful. Out of interest what version of Windows are you using for GTT? Many thanks
@KnowKnots
5 жыл бұрын
I use windows 10 and haven't had any problems but you can try
@Tracyspaperpastimes
3 жыл бұрын
Hi, I am trying to download the GTT program and I get the message that the program can not be found on the server. Is the program still available to download?
@KnowKnots
3 жыл бұрын
Hi, the main link is broken but you can go here: www.guntram.co.za/tabletweaving/gtt.htm and then click link for the mirror site. That will start the download.
@revc9835
3 жыл бұрын
@@KnowKnots i tried this but its said that i can't open it
@nixhixx
3 жыл бұрын
the 'German' site worked for me, this week.
@stevemichael8186
9 ай бұрын
When i click a card spot its making the whole row turn that color instead of the individual spots?
@KnowKnots
8 ай бұрын
It sounds like you don't have any turns of the cards set. If one card is showing all the same color then it hasn't been 'turned' and you're seeing just one holes worth of color.
@lauraherrera2030
4 жыл бұрын
Hello! The page where the program is downloaded does not work! 404 not found appears :( Could you help me with this?
@KnowKnots
4 жыл бұрын
Hi, try the mirror site: www.weberey.de/bin/gtt117.zip
@lauraherrera2030
4 жыл бұрын
@@KnowKnots thank you!! :)
@strengthchain
4 жыл бұрын
How do you fix the error on the back side at 26:45? I've tried changing the s and z, but then the pattern on the front side isn't right either.
@KnowKnots
4 жыл бұрын
Sorry i haven't replied sooner. If your weaving is showig up on the back/bottom side of the band then you need to double check your S & Z. But not all patterns can be fixed by just flipping the cards. You might need to make sure that you threaded them correctly as well. If you would like more indepth help try joining the Facebook Group: Tablet Weaving Sharing. There are a lot of people, myself included, that can help you trouble shoot the problem.
@stoopdanette
3 жыл бұрын
Hi, does it matter that the card rotation ABCD is anti-clockwise on the program, everything I've see so far the rotation is clockwise on the cards, will this matter how the patterns comes out in the end?
@KnowKnots
3 жыл бұрын
Hi, It very much does matter if the rotation is clockwise or counter-clockwise because that will determine what 'forward' means. I actually go over this very thing on my other video "How to read a GTT pattern" kzitem.info/news/bejne/q4mVzqyJn32rhnY At the 2:55 timestamp I start talking about how to determine which direction to turn your cards based on the ABCD notation.
@nixhixx
3 жыл бұрын
There are arrows in the Cards section (red ones) to change from counter-clockwise to clockwise.
@JochenSchrenk
5 жыл бұрын
Why is not it possible to add carten to a finished twill pattern, why can not I print a picture of the finished pattern, it is impossible to weave with empty holes, weave square cards one missed hole or two missed holes or hexagonal it is always a white or a black thread but not a missed hole, I weave with cards in the direction Z direction and in the direction S direction and I turn the cards exactly as I go forward (I turn the cards away from me) or with my car driving backwards (I turn the cards up to me), why is that in GTT exactly the wrong way around as I do it. My cards Augen A, Bauch B, Zehen C, Decke D, wy ist it by GTT exactly the opposit VO D, VU C, HU B, HO A --- my forwards ist the GTT backwards and my backwards ist the GTT forwards, I just did not get it
@KnowKnots
4 жыл бұрын
I don't know what to tell you other then that this is the way the creator of GTT set up their program.
@oguzalpduran
3 жыл бұрын
Tagnot found? error pls
@KnowKnots
3 жыл бұрын
I don't know what this error is from. Can you elaborate?
@sbornot2b
2 ай бұрын
The download page for GTT is no longer working. If anyone has the zip file, shoot me a message please
@scp0906
2 ай бұрын
If you go to the download page there is a link for a mirror site. This is where the download that works is.
Пікірлер: 50