Shop these Freedom Offroad Front Upper Control Arms: terrain.jp/30KVWc7 🎞Subscribe for Daily Toyota Tacoma Videos: bit.ly/2FtUeUw
@RioGood
4 жыл бұрын
Sure wish your site had FJ Cruiser parts.
@dreashirlene3285
3 жыл бұрын
Put these on my 2011 Tacoma and made a world of difference on my 3 inch lift!
@dcmiguel7777
5 ай бұрын
How have they held up to this date in 2024?
@dreashirlene3285
5 ай бұрын
@@dcmiguel7777 Perfectly!
@chrisrschwartz
4 жыл бұрын
Great video. Just lifted my FJ and it was almost identical. There was a bit more hammering, bleeding, and swearing involved tho 😵
@eeicklim
3 жыл бұрын
Your supposed to set the vehicle down so that the suspension is at its resting position before tightnenting the UCA bolt down. Other then that good video .
@daneswanson
10 ай бұрын
Rookies 😏
@USATAZZILLA
3 жыл бұрын
wow that has to be the softest hits on the knuckle ever to pop the ball joint free, Those nails are so clean what is the secret. I just installed my passanger side Freedom off road UCA and it was not that easy you go girl you did great
@atl7720
2 жыл бұрын
Just put these arms on my Tacoma with the rough country 2 inch level spacer. Makes an incredible difference on the ride.
@ExtremeTerrainToyota
2 жыл бұрын
I'm sure it did! Aftermarket control arms are a *must* if you have room in your budget. -Zach
@brianwilson1145
2 жыл бұрын
How does it feel better? Less wobble or noise?
@atl7720
Жыл бұрын
@@brianwilson1145 dude it feels great. The truck would float so bad with the lift. The control arms make it ride so smooth. I could get it up to 100 and the truck just cruises
@maxgrande2508
5 ай бұрын
Brilliant: Placing the punch on one side of a UCA to hold it place while installing the bolt from the other side of it.
@hebdomatical
2 жыл бұрын
I won't be buying the product (SPCs for me), but the production skills in this video are excellent, just excellent! This video gives me confidence in the job, not only because a woman one third my age is doing the work, but she is showing me all the things to expect and to overcome. Well done, I realize this is not just your presentation, but a whole crew is involved in its production. I can only say I wish more KZitem videos were this good. No music, no unnecessary BS, just the necessary instructions. Well done to the team!
@yota22RE81
4 жыл бұрын
I thought you were supposed to allow the weight of the vehicle to settle either using a jack or lift with wheels off THEN torque the nut on the UCA??? That'll cause premature bushing failure......
@invertedstatesofamerica375
3 жыл бұрын
But then you would have to a buy a new bushing from them, they wouldn't want that....
@jengtiger2882
3 жыл бұрын
The thickest UCA I've even seen compared with the ones from Camburg, Icon, Total Chaos, Dirt King... The only thing to improve is the welding on it.
@jackedburton7639
4 жыл бұрын
Just dropped off my Taco at the shop to have these and some OME 887s put on.
@westeed1
3 жыл бұрын
Didn’t bust a knuckle or a nail. Nice job
@fredtzystuck5794
4 жыл бұрын
Excellent explanation. Perfectly thorough. You’ve helped out my buddy Mansoor raja a great deal.
@snowhiterover
3 жыл бұрын
Great control arms... just installed on my 2002 4runner
@Astartesparty
7 ай бұрын
Steering knuckle isn’t called a spindle but whatever floats your boat
@groyper1177
Ай бұрын
Are these adjustable? I installed these on my 2009 Tacoma, and new lower control arms, an arb bumper, 3” spacers on the struts. Wheels won’t align, even when the camber bolts turn the lower control arms all the way out, the tires still “V” in towards the center.
@jeremydontuknowho463
4 жыл бұрын
Torque to spec once it is under load
@jeremydontuknowho463
3 жыл бұрын
With a jack under the lower control arm try to get the upper control arm to the height it will be when the wheels would be on the road. This prevents the bushings from tearing in half and destroying your brand new control arms
@jeffroberts2279
11 ай бұрын
Don’t make much sense to me. When you jack it up wouldn’t it tear the bushings up when weight is took off ?
@jaimelorona5268
6 ай бұрын
Do these already come greased up or do you need to grease before installing?
@theGRNapples
4 жыл бұрын
Do these UCAs correct castor?
@kollinsendall1
4 жыл бұрын
It takes me longer to gather my tools than it does to take apart my suspension I've done it so much now.
@stefan3225
Жыл бұрын
I’ve seen the UBJ on these break with low miles. That’ll leave you stranded, possibly severely injured depending on when it occurs. Don’t try and save $200 on a part this crucial…
@jeffroberts2279
11 ай бұрын
Does this help with bumpsteer? Mine rides bad over bumps jerking steering wheel? Does this help with that? Caster ?
@4bvenom733
2 жыл бұрын
I don't understand people getting this uca and you can get Rough Country uca if you go over 3 inch of lift
@Fliptyper69
2 жыл бұрын
Hello i just purchased freedom upper control arm in your website. I have question what type of ball joints do you replace the ball joints?
@azlongtales
3 жыл бұрын
In all these tacoma uca videos they only show the easy side (driver) not passenger (hard) with everything in the way.
@alexanderestk
3 жыл бұрын
Can I get my castor +4 with these?
@alexanderestk
3 жыл бұрын
Definitely can!
@savathoun789
3 жыл бұрын
What are the differences between Camburg and Chaos and Freedom Off Road?
@hectorg4164
3 жыл бұрын
The adjustability and the unibal options that the camburg and chaos UCA’s have
@wazowskij8157
4 жыл бұрын
So what kind of ball joints do these freedom uca’s come with? Can you press a moog ball joint in to replace the ball joints they came with when they go bad or what. These are things myself and other people might want to know in a video like this.
@jeremydontuknowho463
3 жыл бұрын
I replaced the upper ball joint in these arms and it supposedly only accepts their replacement BJ (haven't spent any time comparing to other upper ball joints). And the repair calls for the "import ball joint" press kit.
@thatsicktacosauce
2 жыл бұрын
My balljoint boot on these just ripped after 2 yrs and wondering on how difficult to replace the balljoint and does it include new boot?
@tr4ilblazin
2 жыл бұрын
Can this be use for the 5th gen 4Runner
@wickedcrypto6004
2 жыл бұрын
This girl is beautiful and super knowledgeable. I love this channel lol.
@elamigodavi
3 жыл бұрын
Will this work with 5gen 4Runner
@chadackman1691
2 жыл бұрын
What do you recommend for a 6” lift?
@charlyseitz3831
2 жыл бұрын
these with extended spindle
@theomanley1261
4 жыл бұрын
I’m trying to fit 33s will this help with caster?
@snowhiterover
3 жыл бұрын
Yes and no. You'll still need an alignment and ask to move to +3° caster... but these will help
@Sg_roe
3 жыл бұрын
One question I know this video it’s one year ago but it my car it’s lifted already 3” can i still use this to have a better alignment on my wheels or it will be more high?
@jorgebarajasafanador9909
2 жыл бұрын
If you have a 3-in lift and if you install this arm it gives you a better angle for nicer alignment that means your tires will last longer
@James_r5
4 жыл бұрын
I’ve been looking for new upper control arms to fix a rubbing issue with my stock uca so just double checking do these have more clearance than the stock ones?
@ExtremeTerrainToyota
4 жыл бұрын
These *will* have more clearance compared to your stock upper control arms, and will help maintain proper suspension geometry and alignment specs after lifting 2-4" of lift. -Zach
@bthompson1767
4 жыл бұрын
You need to lower that lift to reach easier also the nails the watch is to much
@SR5JOHN
4 жыл бұрын
Is she single?
@ronmontgomery6710
4 ай бұрын
Bro that’s Shane Gillis’s sister
@chelly9131
3 ай бұрын
@@ronmontgomery6710she is a bit of a day walker if you ask me 😂
@americanmade422
4 жыл бұрын
Shouldn't there be a castle nut where the nylon nut is??? Great video, this made my install go much smoother today. Thank you
@lex4758
4 жыл бұрын
Maybe it uses a lock nut. My JBA uses lock nut
@drrobotsir
Жыл бұрын
I have the same concern. I feel that nyloc is not as reliable as castle nut.
@billm4138
Жыл бұрын
@drrobotsir just got mine for my 2020 off road..They have castle nut with cotter pin now
@josephbrooks9794
2 жыл бұрын
I didn't know this was how a sandwich was made.
@ExtremeTerrainToyota
2 жыл бұрын
If you thought this install was good, you should see my sandwiches. -Merideth
@josephbrooks9794
2 жыл бұрын
@@ExtremeTerrainToyota 🤣
@nottevenclose4139
9 ай бұрын
These control arms are absolute garbage. Cheap Chinese materials and poor quality components. Read reviews.
@MonkeySpecs301
3 жыл бұрын
man come on, you get a chick with long finger nails who don't normally work on cars just to get views, lol.
@junior88fan64
3 жыл бұрын
Hun, you soulda use gloves. safety first so you don't tear up your arms.
Пікірлер: 69