I think spread out looks cleaner. Brings attention to the whole grille in my opinion
@XDgamer-lk8nf
2 жыл бұрын
Thanks 😊 for the video I know where I can tap into now I don’t have drl headlights just an sr5 thank you for helping me with this part of it I want my raptor to run when the truck is turn on 😎👍 waiting on my trd grill and lights any day now 😆
@colinware6064
3 жыл бұрын
Just got my smoked white ones installed. Thanks for the inj tip
@zellycummings6328
4 жыл бұрын
86 in Mississippi today. But just bought my 3rd Gen last week. Already have several of your vids saved to reference. Great stuff. Keep the content coming. My ability to do this stuff depends on your guides lol. Subbed.
@LiannaMorrow
3 жыл бұрын
Awesome! I appreciate it! Lol good luck with everything!
@johnmckenna4256
2 жыл бұрын
Thanks for this, everyone else wires them so they come on with the headlights, great video
@LiannaMorrow
4 жыл бұрын
I messed up again..lol. There's another clip on the side of the wire bundle that opens up the casing and allows you to feed the wire in with the rest of the wires instead of through the gap.
@wyb22
3 жыл бұрын
Thanks for the tip. Much better on the DRLs.
@user-xc2tk8wz2v
3 жыл бұрын
The title says "turn on with DRL" but the video is about installing the lights and replacing the fuse to have them running all the time. Can someone tell me which fuse actually correlates DRL.
@lilianaflores7580
3 жыл бұрын
Plug it to the inj fuse
@quantumxrp3789
3 жыл бұрын
@@lilianaflores7580 IT WORKED THANK YOU!!!!!! NOT ALL HEROES WEAR CAPES 😭😭😭🙌🏽🙌🏽🙌🏽
@anthonysmith9410
2 жыл бұрын
The inj is not the drl fuse…..and if you plug the add a fuse anywhere the raptor lights will be on all the time on engine start up. You need to splice into the wire coming FROM the fuse to the actual drl light
@bertha4304
Ай бұрын
If she can afford that truck, she can afford another butt splice. Maybe spring for one with heat shrink tubing. I also connected mine to an add-a-fuse in the INJ spot. Used dykes to snip a small notch in the fuse box for the wire. I have an electronic gadget (from EBay) to dim the raptor lights to 1/2 power when the low beams are on. apparently, this is the EU standard for DRLs (my DRLs do this). Haven't installed it. Not sure anyone would notice.
@travistiffany5585
2 жыл бұрын
You don't need to pull that wire loom out. Just take an extra piece of wire, push it down through the loom. Then tape your red wire to it, and pull up through the loom. Much easier.
@SwitchbladeSue
3 ай бұрын
The side of thay wire bundle unclips and opes so you dont have to try and thread it through. Its easier.
@DaniloCaranay
6 ай бұрын
Better than before
@Hansaman58
Ай бұрын
How have they worked long term? I’ve seen comments on Tacoma World about people having issues with fuel injectors and even O2 sensors because they plugged that add a fuse into the INJ spot. One of the comments mentioned voided warranty. My lights are currently connected to the headlight fuse but would also like the raptor lights to be on all the time.
@ryanmoore8024
4 жыл бұрын
I can’t wait till the next taco vid!
@ryanmoore8024
4 жыл бұрын
Hopefully it will be a snowy vid!
@joekielbasa2397
4 ай бұрын
Awesome job! I like them all across!
@scottblake6850
4 жыл бұрын
Lights look great! You did a nice job! Did you get your 5.29 gears yet lol! You really need to do that I did it to my 2017 Tacoma n what a difference! You take care n stay warm my friend ❤️
@euclideureka1142
3 жыл бұрын
this will be my next project, thanks
@tylerzimmerman1641
3 жыл бұрын
I ended up doing the same here, but my headlights didn’t kick on when they were supposed to 😅 to my knowledge, I don’t have any fuses unplugged and the add a fuse is in the right spot
@714ATK
9 ай бұрын
Old video but hope to get answer. Can I place the add-fuse to the DRL fuse? I don’t want to mess with the INJ and I want the lights to come on when I manually turn on the DRL’s… please don’t say plug in INJ as I don’t want them to be on all the time. Thank you.
@jhovanylopez1897
Жыл бұрын
Good video... question is why did you use a 15 amp fuse .. can a different fuse be used?
@brianr8801
Жыл бұрын
The electrical tape is wildly offputting. A new butt connector costs almost nothing.
@MrZman0004
3 жыл бұрын
Update please? Still no issues to date by tapping into the INJ fuse slot? Tnx!!!
@LiannaMorrow
3 жыл бұрын
still no issue!
@FergieNCC2475
Жыл бұрын
Question! Very belated question. I'm kinda new to Tacoma ownership and mods. 3 months I installed raptor light in my 2022 and used the INJ fuse location as you did. No problems until yesterday. Check engine came on and dealership said the add-a-circuit fuse tap was overloading the injectors and causing the O2 sensors to give bad readings. Then they charged me 3 hours labor for pulling out the fuse tap (not warranty they claimed) In the two years since you posted this have you had any issues similar. Thanks. Sorry I didn't see your vids earlier.
@QuessooStunts
Жыл бұрын
Thank you!
@BraeburnTV
Жыл бұрын
How would I get raptor lights to turn on and off with the DRL’s? When the headlights dial is turned completely off, everything is off, when DRLs are on its raptor lights and DRLs, and when headlights are on its just headlights
@Alvisr7
2 жыл бұрын
Do you know if these void Toyota warranty?
@shanealicea8883
Жыл бұрын
They look better!
@MsSkaterdude14
Жыл бұрын
On mine they pop on once a while and stay on for some reason. Do you know why they keep coming while the truck is off
@D_Cali_Life
2 жыл бұрын
3 lights is for 3rd gen 4 lights should be for the 4th gen 😲
@Yyr1995
3 жыл бұрын
I have a question. When I installed the Raptor meshlight. My automatic daytime running light won't work. My car is the 2021Tacoma TRD Pro
@richardphan6395
3 жыл бұрын
I ran into the same problem but found the answer in a different vid. Make sure that you unlock the hand brake after ignition. When i did that, my amber lights works at any setting.
@maryannjuralbar4126
2 жыл бұрын
Mine too how did you fix it?
@veronicaserrato9827
3 жыл бұрын
Hi, I tried installing some raptor lights that I had bought at Amazon but to be honest for some reason they didn’t fit they were like flimsy didn’t pop when you put them in I don’t know if they’re not meant for my forerunner but I’m hoping I could find something that would fit maybe those that you have but then again I don’t know if they will or not Great video.
@raulbarraza3306
Жыл бұрын
Am I doing something wrong on my 2019 trd in that position they won’t turn on and my truck won’t start And in 10 a h-lo rh-lo obviously only right will turn on raptor light but my left headlight will be out
@mariobarrios6546
2 жыл бұрын
Did you paint you Toyota letters in Black i think they selling in ebay light Gray i like the way yours look..
@a1331326
3 жыл бұрын
The wire splice (Butt Connector) of the add a fuse, needs to be crimped,. The metal splice inside the insulation of the butt connector MUST be crimped down to make a connection not the end of the plastic insulation. The connection WILL get hot and could damage your fuse box. Using just electrical tape to hold the wire in place will fail, get hot, and do some damage.
@oldhag2881
2 жыл бұрын
Spring for a new State-Kon.
@euclideureka1142
3 жыл бұрын
nice,,jealous..im getting one soon
@anthonysmith9410
2 жыл бұрын
How do you wire the lights to work with drl on off switch? You know, shut off the drl and raptor lights go off also
@veronicaserrato9827
3 жыл бұрын
I like them like that! 👍🏻
@markvaughan4943
Жыл бұрын
The fuse holder you selected won't work on a 2022 SR5 because a plastic terminal guard interferes with the fuses on the add a fuse harness. You can't plug the add a fuse harness in backwards if you want your new circuit protected by the fuse. Plugging the add a fuse harness in any way that fits gives you a 50% chance of having no fuse protection to your new lights. You need a multimeter and knowledge of how to use it to install add a fuse correctly. If you don't know how, find someone who does.
@romiboi
Жыл бұрын
Fuses are non polarized and can be put in either way. It is not a capacitor or a diode. A fuse is just a wire with a certain amperage limit indicated on it. Any amount over that limit and it will “blow” the fuse, essentially melt the wire. Doesn’t matter which way the current flows through the wire for it to work properly. Before you try to question someone’s intelligence, reflect on what you’re about to state as an apparent better answer.
@justinlaurea7306
3 жыл бұрын
When u plug in the fuse did u here the injectors like turn on if that make sense
@JuniorJr_23
3 жыл бұрын
Thanks for sharing and will be doing this mod as soon as my lights come in. Question, tapping into the ING fuse will have the raptor lights on all the time just like the DRL? This means they can't be turned off only when you turn off the truck. I LIKE THIS!
@LiannaMorrow
3 жыл бұрын
Yes, exactly! They turn on when you start up your truck and turn off when you turn the engine off!
@JuniorJr_23
3 жыл бұрын
@@LiannaMorrow Ok, sounds good! Thanks!
@equalizer2233
3 жыл бұрын
@@LiannaMorrow When u get the premium package it comes with auto headlights. There is a drl off position on the switch so u can turn all the lights off when u want to.
@FivexxXxx5
2 жыл бұрын
This is the only thing I’ve found closest to having them on with DRL’s and it worked ! Have you had any issues whatsoever? Thank you very much
@oldhag2881
2 жыл бұрын
In the INJ fuse spot, the raptor lights are on whenever the truck is running.
@bobeardington4044
Жыл бұрын
Are the raptor lights still doing well?
@4bvenom733
2 жыл бұрын
Doesn't look like you can turn it off or on when using the DRL
@justinlaurea7306
3 жыл бұрын
And issue like poping fuse when the car idles on the 10a inj or no
@joshtattooer
2 жыл бұрын
I tried using the inj fuse spot to have them on with the drl and they just remained on all the time. Even when the truck is off. Am I doing something wrong?
@lilsmurf1053
2 жыл бұрын
Did u ever fix it
@braydenjackson1317
3 жыл бұрын
What if I just want my raptor lights to run with my dlr and just headlights not all the time.
@equalizer2233
3 жыл бұрын
You dont have that option unless u have the auto headlghts.
@DavyDave1313
3 жыл бұрын
@@equalizer2233 I have the auto headlights. So what do I do
@angeloraucci5652
3 жыл бұрын
Wouldn’t wanting to run them with “only” your drl and headlights literally mean the same as running them all the time?
@DavyDave1313
3 жыл бұрын
@@angeloraucci5652 no. so even if the truck is off, the lights stay on - not good. I just wired mine to the inj fuse - best option
@RobertPiacenti
2 жыл бұрын
Thank you, #girlpower
@虎啸平阳
3 жыл бұрын
Is that safe for plugging into inj fuse? I tried to take the inj fuse out and the engine stopped running immediately. I thought if the raptor lights fuse had a bad quality, the truck would just stop on the freeway when it had been fused.
@teforte
2 жыл бұрын
You shouldn’t be pulling fuses with the engine on. Always turn off the electric!
@oldhag2881
2 жыл бұрын
I think the add-a-fuse adds a fuse in parallel to the INJ fuse.
@j.e.guerrero5838
3 жыл бұрын
So on that fuse where you connected, led will turn on on truck startup even if you have your main lights or DRL off?
@LiannaMorrow
3 жыл бұрын
Yes, correct. The lights will turn on with the truck even if the headlights or DRL's are off.
@septmbrsvryown
3 жыл бұрын
And will these raptor lights stay on throughout the day and night even while the headlights are on at night? And basically the raptors will just be on every time my truck is on? Thanks!
@LiannaMorrow
3 жыл бұрын
@@septmbrsvryown Yes, when your truck is on, the raptor lights will be on with your headlights and fog lights. When you turn the truck off, the lights will turn off.
@JG-lj2ls
3 жыл бұрын
So no issues tapping into INJ fuse location? No intermittent raptor lights coming on with fuel system check when vehicle off?
@LiannaMorrow
3 жыл бұрын
@@JG-lj2ls No issues so far at all!
@br00klyngreek13
3 жыл бұрын
Jesus these comments are confusing lol...to get the raptor lights to work when you turn on your DRL's half the answers are saying INJ, then the other half are saying INJ for whenever the truck is on the raptors will be on
Пікірлер: 82