If the viewers understood the panic trying to find a coil. That was a interesting 5-10 minutes and not knowing if you were going to be able to get your pass in. But it was definitely nice to see the car up and running and making passes.
@iwantblue491
4 күн бұрын
Some old Codger sent me over to Like and Subscribe so .... Liked and Subscribed ;) Good Luck with the Channel as well as the Stang 👍
@Roostfactor1
4 күн бұрын
I'm agreeing with this person. Same deal.
@douglashartsaw3286
3 күн бұрын
Me too
@freddylaurens6098
3 күн бұрын
Love the father son stuff and the dogs hanging
@jeffbowman7017
3 күн бұрын
Engine sounds great.👌 Nice to see a Mustang that doesn’t have a LS in it.
@outdoorpoormet9447
3 күн бұрын
I agree. (And I'm a Chevy guy.)
@FastSS02
2 күн бұрын
And that's why it's so slow! LOL
@chuckg5785
Күн бұрын
@@FastSS02that way BRETT with the green mustang is making CLEET spend $300,000,00 to out run a mustang !!!!!!!😂😂😂LoL 😂. no LS , SMX ,and we had to get a pro line motor !!!!! Then you had to hire him to keep him for racing!!!!! YOU CHEVY FAN BOYS
@GMbusa1
Күн бұрын
Time for a coyote engine swap
@danmyers9372
23 сағат бұрын
I’m an old Ford guy but I really don’t care what engine you put in a race car. A street/muscle car yeah I believe in keeping the engine brand the same as the car. But in a race car it just doesn’t matter. The car has no idea what logo is on the engine. For me making good, reliable power that is easy to service at a reasonable cost are the most important factors in a race car engine.
@Hodge3425
4 күн бұрын
I just subscribed after watching the last video of your dad’s channel. I look forward to Great content brother, just like your old man!!!
@gearhead06
4 күн бұрын
Forgot its also nice to see a small block ford running in it I understand eventually you may wanna be quicker and change but ty for showing the SBF is no joke either really love them engines but I grew up with them i am around your dads age also got to play with the 351 Cleveland 4v back in the day for an all iron block factory engine they made good track power most up high but where you need it on the track unless you got lots of suspension work back in the 1990's seen 2 running a 9 second ET at 4500 feet at salt lake city drag way both powered by flat tappet solid camshafts and all iron engines pretty darn good for the day. Also had a friend had a 66 ford short bed pickup when we headed to track he had his dads big block chevy truck anyway he laughed at our 351c engine till he got whooped he was running low 12's truck was low 10's with a 351 Cleveland. anyway he wasnt saying shit after and he avoided us. I like all american muscle dodge included im a weird breed but I do love SBF's love watching your car as well as your Dads wagon anyway enough said take care and best of luck with this channel
@alargecookie
4 күн бұрын
Commenting for the almighty Algorithm. Let's go Kyle Morris!
@upptowne
Күн бұрын
I sure like those power wheels. I know that is not the objective. Watching Kyle drive through them with no panic is good.
@josevazquez8201
2 күн бұрын
Awesome channel beautiful fox body ,awesome background music!! Great content to watch. Thanks for mechanic entertainment.
@thomaschumley3904
4 күн бұрын
More fun with The Morris crew!! I'm in!
@stevebussius7887
3 күн бұрын
Thanks for sharing the install Kyle! I should have sent you the UPR bushing tool, would have saved Steve from having to make one. We at UPR are proud to see you upgrade to much stronger and safer UPR Extreme Series upper and lower control arms and spherical bushings!
@marklottero5345
Күн бұрын
Glad you're getting the Mustang out again. Cars like this are relatable to people.
@intentsmodz
Күн бұрын
Hell yeah, Love your dad's channel, just keep doing what y'all been doing & I'm sure you'll do great.
@JohnRoberts71
4 күн бұрын
Great content thanks for sharing
@garywoodward847
3 күн бұрын
Ya'll need to market that bushing tool. Seriously. I'd buy 2. So many times that would have saved me a whole bunch of time. Think about it. Everybody I know would want one.
@136092195
4 күн бұрын
Congrats Kyle and good luck The Crazy Old Man In The Yucatan
@richardmorton1310
4 күн бұрын
Steve. You need a Kyle Morris shirt!
@marklottero5345
Күн бұрын
Glad you're getting the Mustang out again. Cars like this are relatable very to people.
@SomebodysNephew
3 күн бұрын
Beastin it! You and your father are just so much fun to follow with all of the things I have learned as well. Heck yeah I'm down for the long haul with your new channel.
@metalted6128
4 күн бұрын
Love Kyle’s mustang!! Nasty SBF!!! So excited to follow your channel!! Kyle!!
@albertvenable4122
Күн бұрын
Proud to see I'm not the only dad that ends up doing all the work 😂😅😂
@BIBSTERSrepairshop
4 күн бұрын
Excited to see the new channel!
@UKMechanic
4 күн бұрын
Strictly speaking it's not new but the last video was six years ago so it might as well be.
@BIBSTERSrepairshop
4 күн бұрын
@@UKMechanic true
@AidanLynch208
3 күн бұрын
Handled that wheelie just like a dirtbike!!! Hell Yea!!!!!
@erickbernard8208
4 күн бұрын
Spooler jet for the win
@johnnyellerson2525
2 күн бұрын
Considering, I think you achieved success. Great launch, drives straight and wheelies without incident. Great to see you back in the swing of things. Good luck.
@anetworkservice
3 күн бұрын
Way to go Kyle. FYI: I had a hard time trying to find you after Steve’s video. I got a golfer. YUK! I mean darn… LOL HEY I just had to jump on and give you a comment for having Steve working in your video. Kudos! I was going to tell him how hard changing those in the car is. The GM 12 bolt rear end is much worse. I had to cut mine out. Nice tool Steve!
@alanlocklear8564
3 күн бұрын
Have fun, be safe, and race hard... 👌😎👍
@craigm5511
Күн бұрын
I hope future videos are more about you Kyle. With you filming your old man, having him doing the talking and doing the wrenching, that first 1/3 of the video felt like another video for your Dad's channel. Really looking forward to your Dad stepping away from these videos so that you can stand on your own and make this channel brilliant.
@Aladinscave
4 күн бұрын
Congratulations on the channel excited to see 💪🏻🏁🇬🇧
@hemifiedsixtyfour2813
4 күн бұрын
This is going to be sweet. Cant wait to see more on the Mustang.
@ldtenenoff
4 күн бұрын
Congrates young fella enjoy smile amd keep following the king and all ur racin dreams r just around the corner
@matthewmccormick2417
4 күн бұрын
Always great to see the Family race together.
@AnthKdd
46 минут бұрын
I love that you are running all Ford there Kyle. Don't give up buddy. You just picked up another sub. 👍
@stormyyoung6344
4 күн бұрын
Finally got some mustang content👍 cool to see you adding new videos to your channel maby I get to see the stang win some races.
@michaeljones3827
3 күн бұрын
Some dude I have known for a zillion years told me to come over here from his channel and like and subscribe. Changing turbos would be crazy expensive, but I think a small shot of nitrous would get the turbos to spool up. Why not set it up for now for the 8.50 class? It seems to be very consistent. ANd running the 8.50 class would not force you to spend a ton of money, since you are only a tenth off. if you could get it to be consistent at that .8.50 as it is at 8.60, you might have a winner and not kill parts. Drag week with Pops? LOL. You two to me are the top of the drag and drive world, when it comes to sharing knowledge. Just go by the seat of the pants on content, like your father does. Thank you for this.
@miceinoz1181
Күн бұрын
How different, normally it is Kyle working on the wagon, now it is Steve working on the Fox body. How a family team should work.
@600wheel
Сағат бұрын
I love that Steves son Kyle is a Ford guy. He knows the truth😂 Edit, and Baer brakes, only the best. I love mine
@garthp9874
3 күн бұрын
Good to see you are running a FORD. Glad to see you started your own channel. You have come a long way. Just another day at the track, as your dad would say, breaking stuff. Good Luck.
@user-ww3ue8xk8j
3 күн бұрын
Glad to see Kyle with his new channel. I just saw the Cletus video on the engine for his new car. I bet they won’t have the support they had with SM Engines. Wish they would have gone with the dry SMX. Really like your new channel as well as your dads, best channels and content on you tube. I’m an old sprint car engine builder from way back . Keep up the great work
@theunhingedgamer3762
3 күн бұрын
they'll have the support but likely it'll be like with Texas Speed where they gotta send the engine back every here and then same thing they did with Mullet's SMX and the normal big block Steve made for it
@sleeperimpala2504
3 күн бұрын
Cleetus car is not drag and drive so makes no sense to run a water jacketed block. Confused why so many people can't understand that.
@veto8792
4 күн бұрын
Just subbed. Best of luck with the channel. Excited to see what comes next.
@ryanturner8318
Күн бұрын
I take it you got your discount for the new hair and T-shirts. I have to say that I enjoy watching you guys do racecar things with the whole family and I wish I could have gotten along with my dad better so I could work with him again.
@highadventur
3 күн бұрын
All in all a good weekend of Testing Kyle and Crew. Yeah silly shit happens... keep on it and I'm sure it'll all be okay. Glad to support your Channel. I'm an a former True Street multi time Winner and NMRA Hot Street National Champion currently helping out my buddies ProMod team. Keep it up! Jettn' Jim Wohlford
@spitfirecamaro8059
4 күн бұрын
My car makes an appearance and didn't launch worth a dang all Saturday 🤣. Good vid, looking forward to watching this channel grow!
@khawli6032
4 күн бұрын
Congrats. Looking forward to many more videos
@Motorsportkyle
4 күн бұрын
More to come!
@glenbrannon7224
3 күн бұрын
Awesome, keep us up to date !😊
@stevemuller82muller65
4 күн бұрын
Keep up the great work bro 😎🤙 much love from Pennsylvania 🥳🇺🇲
@michianaracingchannel412
3 күн бұрын
Let’s goo ! More videos Kyle !
@samiscaro3950
4 күн бұрын
G'day Kyle I hope your channel does very well and my name is Sam and I live in Australia love your family business love to watch a dad's channel
@anetworkservice
3 күн бұрын
Paraplegic Turtle! LOL Steve, try to picture that in your mind right now.
@Shaw.77
4 күн бұрын
Nice. Living the dream.
@AndyL940
4 күн бұрын
Their dream not mine😂 Not sure if it’s Kyles either
@davidperry970
Күн бұрын
Team Morris. Living the American dream.
@bobscott9253
4 күн бұрын
Good luck!
@winstonpratt604
Күн бұрын
Definitely needs a little help from the boys over at NX and i believe with that addition you'll be set ....💯🤙🤘
@stevenholland9984
Сағат бұрын
Awesome Kyle keep the content coming brother
@metalted6128
4 күн бұрын
Triangulated 4 link!! Is awesome!! And used on production vehicles for years!!
@BenjySparky
Күн бұрын
Kyle and Steve, y'all rock! Peace
@AidanLynch208
3 күн бұрын
YEEEWWWWW stoked to see Kyle and his car going down the strip!!!
@michaelwestra9861
4 күн бұрын
Great to see some more focus on the SBF stuff! Love the 'stang! Still hope to see a SMF some day!
@georgedreisch2662
3 күн бұрын
Lookin’ like y’all made a productive day out of it, even with Steve’s off-road excursion. Maybe he oughta leave the mudders on BoostMaster…😜
@chrisobrien9334
Күн бұрын
Good footage Kyle. Keep it coming and the channel will grow
@deanwilliamson1373
3 күн бұрын
Love the Morris family. Good luck Kyle.
@markpowers2692
4 күн бұрын
I like it!
@metrickarma
2 күн бұрын
Tickle tickle mr algorithm!! Looking forward to the videos
@halfwaydecentvehicles
3 күн бұрын
Mustang owner here enjoying the content, will share to my brothers
@michaelgallopo5879
Күн бұрын
Cool video 📹 😎...keep living the dream ✨️
@Hammerback972
3 күн бұрын
8:14 cant help but love Dewey! Layin there watchin steve and flattening out the chute. ❤😂
@dannotwalruslarkin9324
3 күн бұрын
It was crazy to see how the geometry changed on the differential as you loosened the mounts. When I worked on circle track cars I stressed how important it was to work in corresponding bolts at the same time and as equally as possible with an ending torque equal. It might hang or sit the way you want, but under stress & load it'll change in ways you don't want.
@tylermartin2895
3 күн бұрын
This is good content father son working on the e mustang I dig it!! Ready see Kyle get a 6 second pass
@danielescamilla5368
3 күн бұрын
One bad unit 🤙
@Jk-yb1ve
22 сағат бұрын
Didn't know you had a channel jump over here from your dad's channel hell yeah bro
@brianholcomb6499
3 күн бұрын
Nice job kid 👍🏻👍🏻👍🏻👍🏻! You will get it! Make everything work correctly, then you start pouring power into it! Glad you have got it back out! People have no idea how much work goes into race cars!
@MPHMayhem
3 күн бұрын
Great Channel !!
@user-rt8ik1ow4i
2 сағат бұрын
Finally found your channel.I'm a new subscriber.Love your content
@timking7496
3 күн бұрын
Likin the Ford Content Circle Back Around and Chase those Chevy,s Down!!!
@GL8ZE
10 сағат бұрын
Nice vid Kyle. She’s almost a field in 8.5 car. Small little adjustment and you’re there to run that class in a drag and drive.
@LittleB0723
3 күн бұрын
Can't wait to see your channel grow!
@tomhamilton9140
3 күн бұрын
Heaven is seeing a Ford powered Ford.
@michellee8369
Күн бұрын
Kyle well done on the upload I didn’t know of your channel I I’m all over SME channel thought I missed the memo until I subscribed 🇦🇺👍
@DanielSanchez-mi7be
Күн бұрын
DOES KYLE MORRIS HAVE A FORD POWERED MUSTANG? GOOD MAN I LIKE THIS KID.
@rogerminter3599
5 сағат бұрын
Love you. Love yer Dad. I'm subd.
@barefootmechanicz7105
3 күн бұрын
Dewey doing his cyclone training!
@dawnmate
2 күн бұрын
Great video dude
@danpzavisch
4 күн бұрын
I don't ever remember seeing the specs on your engine. Ford BB? or what? Love the Mustang!
@deweerd3155
Күн бұрын
Just subscribed. Looking good already 😁
@iangoodbla7054
Күн бұрын
New shirt design is a picture of a blue and black paraplegic turtle! 😂
@tools6106
4 күн бұрын
Making tools that already exist, funny! I’ve done these with my ball joint press! I do like the idea that tools can be made by any of us normal folks. I built my cam bearing installer!
@sneezinhatch
3 күн бұрын
Love to see this car in the low 7s
@Porter92
3 күн бұрын
I didnt know you had a channel! Hell yah
@coachster
Күн бұрын
Kyles channel but Steve’s still doing a bunch of the work. 😂
@jerryrichard1017
3 күн бұрын
Just subscribed. Saw it on your dads channel that you were starting this. Looking forward to your content
@helpallofem4428
3 күн бұрын
More Morris content is a good thing!
@michaelmain1990
4 күн бұрын
Get some rode mics, Either get the wireless ones or one that will attach to your camera. Good luck, alot of people are very picky how the audio is. Especially the older they get. Also wouldnt lowering the bar to the lower hole on the axle help mitigate the wheelie by driving the front end down more?
@young11984
6 сағат бұрын
I had some of those lower control arms, problem is the poly bushings have about a 1/2”-3/4” gap between both halves and allows the to pinch and mash out. I machined a piece of aluminum with an 1/4” bigger hole in it then pressed it into the arm that would allow cruising in the poly but compress the poly and hit the aluminum on hard acceleration…..kind of like a cheap rod end lol
@erickbernard8208
4 күн бұрын
This channel should have been named Steve Morris 2.0 lol, best of luck with the channel kyle #SMXOVERNOONAN
@emilylane170
4 күн бұрын
Say G'day to Cam Clancy over at Noonan's.
@mustangal8534
Күн бұрын
That's the same kind of tool I made to get the bushings out of my 01 super duty after some burning and air hammer and cussing.
@lifehealth489
23 сағат бұрын
cam size needs to be changed to get it over the hump quicker also more injector , may need another converter change also to up launch rpm let pete at HED put a tune in it, it will go 7s easy.. ~ the combo has great potential
@heath2sr248
4 күн бұрын
Good luck with the new channel
@harryjohnson2
Күн бұрын
I didnt know kyle had a channel. Sub'd! love that mustang
@Rustynail951
7 сағат бұрын
@(3:16) you figured movement by the boat load what is the conversion factor to metric 💩tons? 😂 Great content.
Пікірлер: 198