Thank you very much I was searching what to do with my armoires and you just showed me.
@GhmAGm
21 күн бұрын
Thank you so much for the heat gun😂 I literally had no idea. Will redo my kitchen cabinet soon
@PinealPaintingLLC
20 күн бұрын
You are very welcome.
@ExtremeRecluse
2 жыл бұрын
The people who sold these cabinets never mention the the melamine is guaranteed to peel.
@bradvanwolde4970
6 ай бұрын
Thanks for the video. Friends of mine have 25 year old cabinets and all the laminate is starting to peel away from the doors and drawers. We will tackle the project in the spring. Starting off small, then make a major assembly line. ❤
@PinealPaintingLLC
6 ай бұрын
Great to hear! Make some memories! Sometimes it's worth the work instead of buying all new ones! Good luck, let me know how it goes.
@rhondalee7
2 жыл бұрын
Thank you for the information; I am working on mine and still have the glue residue. I was afraid to over-sand them and didn't know what to do. I was going to throw in the towel and have someone paint them for me before I saw your video. The information in the comments below were very helpful as well!
@PinealPaintingLLC
2 жыл бұрын
Glad to have been some help! Happy Painting.
@erickvaliente8158
Жыл бұрын
@@PinealPaintingLLC hi what grade of paint do you recommend?
@erickvaliente8158
Жыл бұрын
@@PinealPaintingLLC what type of primer is it ? That's from Sherwin Williams as well?
@PinealPaintingLLC
Жыл бұрын
@@erickvaliente8158 I use (Extreme Bond Primer) Sherwin Williams. And, (Emerald Urethane Enamel) Sherwin Williams for the finish. Hope this helps!
@cliffordward2959
Жыл бұрын
Thank you for the information will be tackling this project soon
@bfpeake933
Жыл бұрын
BINGO! Thank you for confirming my thoughts on the heat gun. Ready to resto ours reeeeeeal soon
@flowzone1128
2 жыл бұрын
PINEAL I LOVE IT such a great name!! And your shirt with the flower of life this is perfect, blessings!!!
@PinealPaintingLLC
2 жыл бұрын
Much love! Thank you.
@raquelbarba8139
Жыл бұрын
Exactly whatv I i was looking for. Thank you for sharing this!!
@PinealPaintingLLC
Жыл бұрын
You are welcome!
@aimless1700
Жыл бұрын
Hi Amanda...I use zinnser or kitz OG - sands good, Like an auto body primer after dries...sticks to anything (glues, water base, oil base and epoxies) and is half the price. Sand everything with 180
@PinealPaintingLLC
Жыл бұрын
Hi Aimless! Great tips! You just gave me an idea. I will do a video where I test out different primers. Thank you! Happy Palinting!
@mikemyers7317
2 жыл бұрын
Nice, never done one of those. Cute and talented!
@dannytexas09
2 жыл бұрын
Great work!
@ericastier1646
2 ай бұрын
I hope you invest the biggest part in protecting your lungs from spray paint and sanding. Everything else comes secondary including customer satisfaction because health is #1.
@PinealPaintingLLC
2 ай бұрын
Absolutely! Yes. I try. Thank you.
@jeanhawken4482
2 жыл бұрын
Great tips
@kerryfellas1398
2 жыл бұрын
great video I have removed the thermafoil and i'm left with hard glue on the doors, can you elaborate more on how to remove this glue? Thanks
@PinealPaintingLLC
2 жыл бұрын
When it comes to that glue residue, its pretty much on there! So, all I do is wipe it down with Denature Alcohol then I lightly sand that residue. Then I just Prime right over that residue. After Primer I sand it again. I repeat process depending on desired finish. Primer builds it up then sanding smooths it out. I hope this helps!
@rachelleleah
11 ай бұрын
Might be a silly question, but I’m curious if acetone would be safe to use instead of denature since I have that in my bathroom cabinet already as a nail polish remover?
@ibriza6891
2 жыл бұрын
Hey great video can you show the final product after you have finished painting them also have you posted a video showing how to paint these cabinet doors? I have exactly the same style doors and I'm just wondering what I should do with them whether I should rewrap them or if I should paint them for the kitchen
@PinealPaintingLLC
2 жыл бұрын
If prepped correctly you should not be able to tell it had Thermofoil.
@beautycounterbysara3260
Жыл бұрын
Thank you. How do you finish the cabinet frame???
@PinealPaintingLLC
Жыл бұрын
Use the same process, Clean, sand, prime, paint
@jakiesarmiento
Жыл бұрын
I was wondering the same! So they can also be peeled? Or just the part of the process that was clean, sand, prime, paint?
@mariavilleda5086
Жыл бұрын
❤
@MaxMax-th7uz
2 жыл бұрын
Quality video ! Do you always remove the wrap or spray straight over the top if it is in good condition ?
@PinealPaintingLLC
2 жыл бұрын
Thermofoil definitely can painted over. Yet, I would keep in mind that eventually the foil will lift and need to be removed. It may be easier to just take it off before painting.
@MaxMax-th7uz
2 жыл бұрын
@@PinealPaintingLLC , depends on customers budget really , adds time and prep to the job !
@alphaviews4639
2 жыл бұрын
Is this economically feasible over just replacing the cabinets?
@PinealPaintingLLC
2 жыл бұрын
Refinishing rather than replacing usually saves my clients thousands of dollars. Thank you for your question.
@alphaviews4639
2 жыл бұрын
@@PinealPaintingLLC Thanks
@bonnieyoung6780
Жыл бұрын
Are you removing the foil wrap from the trim and sides of the cabinets the same way? Do you just replace the trim instead? We have granite counters and are trying to figure out the best way to go about it. We bought our manufactured home second hand and they had installed beautiful granite but the cabinets are peeling badly underneath.
@PinealPaintingLLC
Жыл бұрын
Yes, those pieces will come off just the same.
@PinealPaintingLLC
Жыл бұрын
I usually not not peel the side panels.
@bonnieyoung6780
Жыл бұрын
@@PinealPaintingLLC Ok, Ty.. Do you typically just paint over those?
@PinealPaintingLLC
Жыл бұрын
Yes, those side panels are typically not thermofoil. They are part of the actual boxes. So, No removal process on the large side panels.
@ToastedGhost
2 жыл бұрын
With kitchen cabinets on the repaint what would you suggest? thanks
@ToastedGhost
2 жыл бұрын
Great demo. What type of degreaser are you using please?
@PinealPaintingLLC
2 жыл бұрын
Krud Kutter is typically used. You want something that will not leave a film or residue.
@suziewert9161
2 жыл бұрын
do you spray your primer or brush and roll?
@PinealPaintingLLC
2 жыл бұрын
I spray a nice heavy even coat of primer on then sand.
@Coco-zd3xg
Жыл бұрын
If you paint the chip board, do you need to worry about the water damage?
@PinealPaintingLLC
Жыл бұрын
First clean and prep the area then apply bonding primer. If you cannot see the stain through the primer, you should be good. If the stain comes through the bonding primer apply stain blocking primer to the area!
@jmw0368
Жыл бұрын
It’s like pulling teeth! 😬
@PinealPaintingLLC
Жыл бұрын
ouch! :)
@simonbarlow4496
Жыл бұрын
When this starts to bubble naturally can it be glued back down
@PinealPaintingLLC
Жыл бұрын
I have not ever tried that. It might work in some situations.
@deebee3901
Жыл бұрын
So how do you remove the glue for painting?
@PinealPaintingLLC
Жыл бұрын
Feel free to watch the other videos to get your answers!
@fade6733
Жыл бұрын
Why not do the back?
@PinealPaintingLLC
Жыл бұрын
Usually the back is a formica laminate. You can check it with a little heat.
@LeandroFTW
Жыл бұрын
Wait, what!?
@ExtremeRecluse
2 жыл бұрын
No reason to paint the back. They have no grease or wear. My melamine cabinets are all peeling, especially around the stove.
@PinealPaintingLLC
2 жыл бұрын
Prep and Paint all sides and edges.
@mikemckeon8562
Жыл бұрын
Can I just paint the thermofoil?
@PinealPaintingLLC
Жыл бұрын
Technically anything can be painted. Will it last? That is one question I would ask.
@anwyn2562
Жыл бұрын
Do you worry about it lasting just because the thermafoil in general peels and bubbles or do you worry about the paint adhering/staying?
@ExtremeRecluse
2 жыл бұрын
With two in people it goes away faster
@PinealPaintingLLC
2 жыл бұрын
50/50 It all depends who is helping! :)
@ExtremeRecluse
2 жыл бұрын
Melomine
@JohnSmith22222
Жыл бұрын
Terrible product.
@ExtremeRecluse
2 жыл бұрын
I have 70 doors to peel and finish
@PinealPaintingLLC
2 жыл бұрын
If you peel them while still hanging its much easier! Then remove the door.
Пікірлер: 72